Low-Forward-Voltage-Drop 4H-SiC BJTs Without Base Contact Implantation
Authors:
- Carl-Mikael ZetterlingCZCarl-Mikael Zetterling
- Mikael OstlingMOMikael Ostling
- 25 July 2008
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 55 (8) , 1907-1911
Abstract
Bipolar junction transistors (BJTs) of 4H-SiC, with a low collector-emitter forward voltage drop VCE have been fabricated without base contact implantation. A comparison of BJTs on the same wafer with and without base contact implantation shows less than 10% higher VCE for the BJTs without base contact implantation. Omitting the base contact implantation eliminates high concentrations of implantation-induced defects that act as recombination centers. This is advantageous because it allows a shorter distance Wp+ between the emitter edge and the base contact, without affecting the current gain when no base contact implantation is used. The BJTs without contact implantation show a constant current gain as Wp+ was reduced from 3 to 1 mum, whereas the gain decreased by 45% for the BJTs with base contact implantation for the same reduction of Wp+. A key to the successful fabrication of low-forward-voltage-drop SiC BJTs without base contact implantation is the formation of low-resistivity Ni/Ti/Al ohmic contacts to the base. The contact resistivity on the base region (NA ap 4 times1017 cm-3) was measured with linear transmission line method structures to rhoC = 1.9 times 10-3 Omegacm2, whereas the contact resistivity with the base contact implantation was rhoC = 1.3 times 10-4 Omegacm2, both after rapid thermal processing annealing at 800degC.Keywords
This publication has 21 references indexed in Scilit:
- 1200 V 4H-SiC Bipolar Junction Transistors with A Record β of 70Journal of Electronic Materials, 2007
- 1200-V 5.2-$\hbox{m}\Omega\cdot\hbox{cm}^{2}$ 4H-SiC BJTs With a High Common-Emitter Current GainIEEE Electron Device Letters, 2007
- Geometrical effects in high current gain 1100-V 4H-SiC BJTsIEEE Electron Device Letters, 2005
- 4 kV 4H-SiC epitaxial emitter bipolar junction transistorsIEEE Electron Device Letters, 2005
- A 4H-SiC BJT with an Epitaxially Regrown Extrinsic Base LayerMaterials Science Forum, 2005
- High‐voltage 4H‐SiC pn diodes fabricated by p‐type ion implantationElectronics and Communications in Japan (Part II: Electronics), 2003
- Process Technology for Silicon Carbide Devices2002
- 1800 V NPN bipolar junction transistors in 4H-SiCIEEE Electron Device Letters, 2001
- Orientation Dependence of the Oxidation of SiC SurfacesPhysica Status Solidi (a), 1997
- Excellent reverse blocking characteristics of high-voltage 4H-SiC Schottky rectifiers with boron-implanted edge terminationIEEE Electron Device Letters, 1996