Calculation of High-Lift Cascades in Low Pressure Turbine Conditions Using a Three-Equation Model
- 18 November 2010
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 133 (3) , 031016
Abstract
A three-equation model has been applied to the prediction of separation-induced transition in high-lift low-Reynolds-number cascade flows. Classical turbulence models fail to predict accurately laminar separation and turbulent reattachment, and usually overpredict the separation length, the main reason for this being the slow rise of the turbulent kinetic energy in the early stage of the separation process. The proposed approach is based on solving an additional transport equation for the so-called laminar kinetic energy, which allows the increase in the nonturbulent fluctuations in the pretransitional and transitional region to be taken into account. The model is derived from that of Lardeau et al. (2004, “Modelling Bypass Transition With Low-Reynolds-Number Non-Linear Eddy-Viscosity Closure,” Flow, Turbul. Combust., 73, pp. 49–76), which was originally formulated to predict bypass transition for attached flows, subject to a wide range of freestream turbulence intensity. A new production term is proposed, based on the mean shear and a laminar eddy-viscosity concept. After a validation of the model for a flat-plate boundary layer, subjected to an adverse pressure gradient, the T106 and T2 cascades, recently tested at the von Kármán Institute, are selected as test cases to assess the ability of the model to predict the flow around high-lift cascades in conditions representative of those in low-pressure turbines. Good agreement with experimental data, in terms of blade-load distributions, separation onset, reattachment locations, and losses, is found over a wide range of Reynolds-number values.Keywords
This publication has 31 references indexed in Scilit:
- Summary of the 2004 Computational Fluid Dynamics Validation Workshop on Synthetic JetsAIAA Journal, 2006
- Separation and Transition Control on an Aft-Loaded Ultra-High-Lift LP Turbine Blade at Low Reynolds Numbers: Low-Speed InvestigationJournal of Turbomachinery, 2005
- The Transition Mechanism of Highly Loaded Low-Pressure Turbine BladesJournal of Turbomachinery, 2004
- A Correlation-Based Transition Model Using Local Variables—Part I: Model FormulationJournal of Turbomachinery, 2004
- Boundary Layer Development in the BR710 and BR715 LP Turbines—The Implementation of High-Lift and Ultra-High-Lift ConceptsJournal of Turbomachinery, 2002
- The Application of Ultra High Lift Blading in the BR715 LP TurbineJournal of Turbomachinery, 2001
- Separation Bubbles Under Steady and Periodic-Unsteady Main Flow ConditionsJournal of Turbomachinery, 2000
- A Prediction Model for Separated-Flow TransitionJournal of Turbomachinery, 1999
- Unsteady Wake-Induced Boundary Layer Transition in High Lift LP TurbinesJournal of Turbomachinery, 1998
- Development of Blade Profiles for Low-Pressure Turbine ApplicationsJournal of Turbomachinery, 1997