Characteristics of Supersonic Oxygen Jet in RH Vacuum Refining Furnace
Open Access
- 15 June 2025
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 65 (7) , 914-924
Abstract
RH is one of the essential secondary refining processes, and the oxygen lance plays a significant part in its multi-functionalization. Therefore, it is necessary to dig deeper into the jet characteristics at low ambient pressure. This study examined the supersonic oxygen jet parameters, such as the jet Mach number, dynamic pressure, turbulence kinetic energy, and half-jet width with computational fluid dynamics, for RH vacuum furnaces operating at ambient pressures ranging from 4000 to 1000 Pa and 101325 Pa. Underexpanded jets were observed at the ambient pressures from 4000 to 1000 Pa, and single strong barrel shocks existed. It was shown that decreasing the back pressure significantly improved the axial and radial Mach number of the jet. However, this improvement was related to a sacrifice of the dynamic pressure. The length of the potential core region and supersonic region increased greatly with decreased ambient pressure. The decrease in ambient pressure also considerably increased the turbulence kinetic energy, indicating a heightened level of energy transfer. However, the correlation between the half-jet width and the ambient pressure was not a simple linear relationship. The half-jet width increased with the ambient pressure decreasing from 4000 Pa to 1000 Pa.Keywords
This publication has 24 references indexed in Scilit:
- Numerical Simulation of Innovative Slag Splashing Process in a Converter Using a Nozzle-Twisted Oxygen LanceJournal of Sustainable Metallurgy, 2024
- Comparative Study on the Cleanliness of Ultra-low Carbon Al-Killed Steel by Different Refining ProcessesTransactions of the Indian Institute of Metals, 2020
- Study on the Fluid Flow Characteristics of Coherent Jets with CO2 and O2 Mixed Injection in Electric Arc Furnace Steelmaking ProcessesMetallurgical and Materials Transactions B, 2018
- Effect of Ambient and Oxygen Temperature on Flow Field Characteristics of Coherent JetMetallurgical and Materials Transactions B, 2015
- Shock wave configurations and reflection hysteresis outside a planar Laval nozzleChinese Journal of Aeronautics, 2015
- Final Temperature Prediction Model of Molten Steel in RH-TOP Refining Process for IF Steel ProductionJournal of Iron and Steel Research International, 2012
- Mathematical Modeling of VOD Oxygen Nozzle JetsSteel Research International, 2010
- Decarburization mechanism of RH-MFB refining processJournal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006
- Use of LNG-Oxygen Gas Mixture in RH Degassing UnitSteel Research International, 2003
- Improvement of steelmaking technology for production of ultra low carbon steel at No. 3 steelmaking shop in Chiba WorksRevue de Métallurgie, 1991