Effect of residence time in the reactor on the reinforcement of biochar in rubber compounds
- 11 September 2023
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 55 (8) , 1236-1250
Abstract
In the present work, the effect of residence time on the production of biochar by the pyrolysis process of Pinus spp. was investigated. Biochar was produced at three different residence times in the reactor (30, 60, and 240 min). The effect of residence time on the load in the pyrolysis process was evaluated based on the rheometric, physical and mechanical properties of the elastomeric compounds. The shortest residence time, 30 min, produced a biochar with a graphitic structure (turbostratic) that was ideal for the interaction between load and elastomer and caused the least possible disturbance to the crystallization process by stretching the natural rubber, which was observed from the tensile strength, while maintaining the mechanical properties. As the residence time increased, it was observed that the more crystalline structure interfered with the crystallization process of the natural rubber when stretched, causing a decrease in tensile strength and decreasing the interaction between the load- elastomer, thus increasing the vulcanization time of the rubber. The compound was prepared using the filler with the longest residence time (NR/BIO240min).Keywords
This publication has 50 references indexed in Scilit:
- Biochar physicochemical properties: pyrolysis temperature and feedstock kind effectsReviews in Environmental Science and Bio/Technology, 2020
- The past, present and future of carbon black as a rubber reinforcing filler – A reviewJournal of Cleaner Production, 2020
- Mechanical Properties and Mullins Effect in Natural Rubber Reinforced by Grafted Carbon BlackAdvances in Polymer Technology, 2019
- Mechanical Properties of Natural Rubber Filled with Foundry Waste Derived FillersMaterials, 2019
- Sericin as compatibilizer in starch/ polyester blown filmsPolímeros, 2018
- Effects of Pyrolysis Temperature and Holding Time on Physicochemical Properties of Swine-Manure-Derived BiocharWaste and Biomass Valorization, 2018
- Properties of biocharFuel, 2018
- UNSUITABILITY OF THE ZEK/AFPS TEST METHOD FOR THE DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS IN CARBON BLACKRubber Chemistry and Technology, 2018
- Features of strain-induced crystallization of natural rubber revealed by experiments and simulationsPolymer Journal, 2017
- Rubber–Filler Interactions and Network Structure in Relation to Stress–Strain Behavior of Vulcanized, Carbon Black Filled EPDMMacromolecules, 2011