WRWillian Belincanta Ribeiro

Willian Belincanta Ribeiro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Willian Belincanta Ribeiro has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multifunctional laminated polyethylene films with calcium carbonate and essential oil additives for food packaging applications

    by Laura Gallina Moscone, Ivana Greice Sandri, Willian Belincanta Ribeiro, Aline Benedetti Bordin, Jocelei Duarte, Rosmary Nichele Brandalise

    Multifunctional polymer film development has attracted increasing interest for food packaging applications by integrating barrier, mechanical, and antimicrobial functions into a single structure. This study developed multilayer polyethylene films by combining a calcium carbonate-filled polyethylene film and a polyethylene film containing a blend of clove and rosemary essential oils, using a polyurethane adhesive layer to assemble the multilayer structure. Two calcium carbonate sources, commercial calcium carbonate and eggshell-derived calcium carbonate, were evaluated. The polyethylene films, based on a blend of high-density polyethylene and low-density polyethylene, were produced by twin-screw extrusion followed by blown film extrusion, while the essential oils (2.0 wt%) were incorporated during a subsequent single-screw extrusion step. The films were characterized in terms of morphology, chemical structure, surface properties, thermal behavior, mechanical performance, oxygen permeability, and antimicrobial activity. The multilayer structure exhibited good interfacial integrity while maintaining the thermal stability of the polyethylene matrix. Compared with neat polyethylene, films containing 0.5 wt% commercial calcium carbonate showed a 27% increase in tensile strength and a 23% increase in Young’s modulus, whereas films containing 0.5 wt% eggshell-derived calcium carbonate exhibited a 26% reduction in oxygen permeability.These improvements were further correlated with changes in crystallinity, as revealed by differential scanning calorimetry analysis. The essential oil blend imparted antimicrobial activity, achieving a 96.85% reduction against Salmonella enterica serovar Typhimurium . These results demonstrate the potential of the proposed multilayer polyethylene system for active food packaging applications.

  • Open Access

    Production of Elastomeric Composites With Different Methods of Incorporating of Graphene Nanoplatelets Into SBR Latex

    by Micaela D. Ferrari, Willian B. Ribeiro, Aline Zanchet, Diego Piazza, Rosmary N. Brandalise

    This study investigates scalable methodologies for incorporating graphene nanoplatelets (GNPs) into styrene‐butadiene rubber (SBR) latex, comparing powder form (GNP) and masterbatch (MB), with and without dodecyltrimethylammonium bromide (DTAB) surfactant. The formulations (0.5% w/w GNP or MB; DTAB in a 1:1 ratio) adhere to the standards outlined in ASTM D3185‐09. The curing process involves mechanical agitation, coagulation, drying, milling, and vulcanization at 160°C. The incorporation of DTAB into MB results in a 78% reduction in the optimum vulcanization time ( t 90 ) compared to the control (CSBR) and an approximate 78% increase in the maximum torque ( M H ). The hardness of CSBR/MB/DTAB increased by 5.5% compared to CSBR, and the permanent deformation decreased by 28%. The tensile strength of CSBR/MB increased by 74% in comparison with CSBR, while CSBR/GNP/DTAB demonstrated an increase of 50%. The thermal conductivity of CSBR/GNP exceeds that of CSBR by 15.2%. Subsequent to thermal aging, CSBR/GNP/DTAB demonstrates enhanced resistance: The data demonstrate a 54.5% increase at 7 days and a 45.4% increase at 14 days in comparison to CSBR. It can be concluded that the combination of masterbatch and DTAB surfactant optimizes GNP dispersion in SBR, making industrial processes without ultrasound viable.


  • Open Access

    Characterization of pultruded composites of vinyl ester and unsaturated polyester resins with different fiberglass reinforcements

    by Laura Gallina Moscone, Willian Belincanta Ribeiro, Diego Piazza, Rosmary Nichele Brandalise

    Different combinations of matrices and reinforcements in composites make the study of this class of materials a challenge, especially when pultrusion is the manufacturing process employed. Pultrusion is well documented in the literature and offers numerous applications across various sectors, including automotive, construction, aerospace, and furniture industries, among others. In this study, glass fiber-reinforced resin composites were produced via pultrusion, varying between unsaturated polyester (UP) and vinyl ester (VE) resins, and glass fibers in the forms of filaments, woven fabric (WF), and mat (MAT). The composites morphological properties (SEM), physical properties (density and void content), dynamic-mechanical properties (DMA), and mechanical properties (tensile and impact strength) were evaluated. Considering the properties assessed, composites with vinyl ester resin exhibited similar density, higher glass transition temperature, greater storage and loss moduli by DMA, improved matrix/reinforcement adhesion as observed by SEM, higher tensile and impact strengths, and lower void content compared to those with unsaturated polyester resin. Regarding the reinforcement type, the mat presented superior thermal, morphological, and impact resistance properties, whereas the woven fabric demonstrated lower void content and higher tensile strength than the mat. Ultimately, the best results among the produced composites were obtained with the VE/MAT and VE/WF samples.


  • Evaluation of the properties of elastomeric compounds with the incorporation of graphene nanoplatelets through various mixtures processes

    by Morgana de Oliveira, Willian Belincanta Ribeiro, Suelen Moresco, e Rosmary Nichele Brandalise

    Graphene nanoplatelets (GNPs) have emerged as promising additives for improving the properties of elastomeric compounds. This study investigates the influence of GNPs on styrene-butadiene rubber (SBR) formulations through a thorough assessment of rheological, mechanical, and thermal characteristics. Various mixing processes, including closed and open mixers, were employed to disperse GNPs effectively. Results demonstrate that the incorporation of GNPs accelerates vulcanization, increases crosslink density, enhances thermal conductivity, and improves mechanical strength in SBR compounds. Notably, open mixer processing yields superior dispersion and thermal conductivity compared to closed mixers. Additionally, GNPs mitigate the reduction in tensile strength observed during prolonged thermal aging. These findings highlight the multifunctional role of GNPs in elastomeric compounds and underscore the importance of dispersion techniques for optimizing their performance. Overall, this research contributes to advancing the understanding of GNPs as versatile additives for enhancing elastomeric materials, with potential applications across diverse industrial sectors.

  • Influence of pyrolysis temperature on biochar properties: Applications as a reinforcing filler in sbr and epdm elastomeric compounds

    by Willian B Ribeiro, Rosmary N Brandalise

    This study investigates the effect of pyrolysis temperature on the properties of biochar derived from Pinus spp. wood waste and its application as a reinforcing filler in styrene-butadiene rubber (SBR) and ethylene-propylene-diene monomer (EPDM) elastomeric compounds. Biochar was produced at 400°C and 900°C and its effects on the mechanical properties of the elastomers were analyzed. The results indicate that biochar produced at 900°C has higher fixed carbon content and lower volatile matter, resulting in improved mechanical properties such as tensile strength and elongation at break compared to biochar produced at 400°C. Despite a lower specific surface area, the irregular surface structure of biochar enhances its interaction with elastomers, providing a semi-reinforcement. This study highlights the potential of high-temperature biochar as a sustainable alternative to conventional fillers such as carbon black, contributing to the development of environmentally friendly materials from biomass waste. The results support further exploration of the role of biochar in elastomer applications, highlighting its environmental and mechanical benefits.


  • Effect of residence time in the reactor on the reinforcement of biochar in rubber compounds

    by Willian B. Ribeiro, Marcelo Godinho, Rosmary N. Brandalise

    In the present work, the effect of residence time on the production of biochar by the pyrolysis process of Pinus spp. was investigated. Biochar was produced at three different residence times in the reactor (30, 60, and 240 min). The effect of residence time on the load in the pyrolysis process was evaluated based on the rheometric, physical and mechanical properties of the elastomeric compounds. The shortest residence time, 30 min, produced a biochar with a graphitic structure (turbostratic) that was ideal for the interaction between load and elastomer and caused the least possible disturbance to the crystallization process by stretching the natural rubber, which was observed from the tensile strength, while maintaining the mechanical properties. As the residence time increased, it was observed that the more crystalline structure interfered with the crystallization process of the natural rubber when stretched, causing a decrease in tensile strength and decreasing the interaction between the load- elastomer, thus increasing the vulcanization time of the rubber. The compound was prepared using the filler with the longest residence time (NR/BIO240min).


  • Open Access

    Evaluation of Biochar Production Temperature in Interaction with Elastomers of Different Polarities

    by Willian B. Ribeiro, Giovani B. Bérti, Maíra Faccio, Marcelo Godinho, Rosmary N. Brandalise