Mechanical properties of modified biofiller‐polypropylene composites
Authors:
- 17 October 2013
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 35 (4) , 708-714
Abstract
This article reports the mechanical, thermal, and morphological properties of polypropylene (PP)‐chicken eggshell (ES) composites. Mechanical properties like tensile strength, tensile modulus, izod impact strength, flexural modulus of PP composites with normal (unmodified) eggshell and chemically treated ES [modified ES (MES) with isophthalic acid] have been investigated. PP–calcium carbonate (CaCO3) composites, at the same filler loadings, were also prepared and used as reference. The results showed that PP composites with chemically MES had better mechanical properties compared to the unmodified ES and CaCO3 composites. An increase of about 3–18% in tensile modulus, 4–44% in izod impact strength and 1.5–26% in flexural modulus at different filler loading was observed in MES composites as compared to unmodified ES composites. Scanning electron microscopy (SEM) micrographs of fractured tensile specimens confirmed better interfacial adhesion of MES with polymer matrix resulting into lower voids and plastic deformation resulting in improved mechanicals of the composites. TEM micrographs showed acicular needle shaped morphology for modified ES and have contributed to better dispersion which is the prime reason for enhancement of all the mechanical properties. At higher filler loading, the modulus of MES composite was found to be higher by 5% as compared to commercial CaCO3 composites. POLYM. COMPOS., 35:708–714, 2014. © 2013 Society of Plastics EngineersKeywords
This publication has 13 references indexed in Scilit:
- Effects of Particle Size on Melt Viscoelastic Properties During Capillary Extrusion of Glass Bead-filled LDPE CompositesJournal of Thermoplastic Composite Materials, 2006
- Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene compositesPolymer Degradation and Stability, 2006
- Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐huskPolymer International, 2004
- Influence of excessive filler coating on the tensile properties of LDPE–calcium carbonate compositesPolymer, 2004
- Biomimetic processes through the study of mineralized shellsMaterials Characterization, 2003
- Toughening of isotactic polypropylene with CaCO 3 particlesPolymer, 2002
- Polypropylene/calcium carbonate nanocompositesPolymer, 2002
- Aspartame Optical Biosensor with Bienzyme-Immobilized Eggshell Membrane and Oxygen-Sensitive Optode MembraneAnalytical Chemistry, 2002
- Tensile property and interfacial dewetting in the calcite filled HDPE, LDPE, and LLDPE compositesPolymer, 2002
- Biomineralization and Eggshells: Cell-Mediated Acellular Compartments of Mineralized Extracellular Matrix1993