Measurement of a rotary mechanical pulsation compensator under hydraulic resonance
Open Access
- 1 January 2025
- conference paper
- Published by River Publishers
- p. 142-152
Abstract
If the pulsation frequency of a hydraulic pump or motor coincides with a natural frequency of the hydraulic system, there is a particular need for pulsation compensation. Under these conditions, a rotary mechanical pulsation compensator is investigated. The compensator consists in a torsional oscillator which is formed by the drivetrain of a radial piston pump and requires a special compensator coupling. At the pump outlet, two different hydraulic layouts are considered, including a closed pipeline and a cylinder chamber connected via a hose. Prior to experiments, simulations are conducted to determine system parameters at which a natural frequency of the hydraulic system matches the compensation frequency. In the experimental setup, the compensator coupling is installed on the pump shaft and driven by a speed-controlled induction motor. The measurements conducted with a closed pipeline show a pulsation reduction by a factor of more than three in the resonance case during a run-up test. Similar results are obtained in a run-up test with a cylinder in its limit stop position. An extension test with constant motor speed shows significant reduction of pressure pulsation. In the present configuration, the compensation effect is narrowband and the design of the coupling causes a dependency between compensation frequency and drivetrain torque.Keywords
This publication has 6 references indexed in Scilit:
- Reduction of Pressure Pulsations over a Wide Frequency Range in Hydrostatic SystemsMachines, 2025
- Design and Simulation of a Drivetrain Integrated Pulsation Compensator for Pumps2024
- A NOVEL PULSATION COMPENSATOR FOR DISPLACEMENT MACHINES2024
- Research Status, Critical Technologies, and Development Trends of Hydraulic Pressure Pulsation AttenuatorChinese Journal of Mechanical Engineering, 2021
- Development of a Compact and Tuneable Vibration Compensator for Hydraulic SystemsInternational Journal of Fluid Power, 2003
- Dynamic Response of Fluid LinesJournal of Basic Engineering, 1964