Microstructure and mechanical properties of TC4 titanium alloy and 316L stainless steel joint by MIG welding with mortise structure
Authors:
- 30 November 2022
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 36 (12) , 732-743
Abstract
This work designed a new mortise structure on the to-be-welded side of TC4 titanium alloy sheet and successfully obtained MIG-welded joint of TC4 titanium alloy (TC4) to 316L stainless steel (316L) with high strength and toughness through the synergy of mortise structure and metallurgical bonding. The effect of mortise structure on the interfacial microstructure, mechanical properties and fracture behaviour of dissimilar joints was investigated. Various intermetallic compounds, like Ti2Cu, Ti2Cu + TiCu, and AlCu2Ti phases, formed in Ti/Cu reaction interface. The Ti/Cu interfacial layer perpendicular to the horizontal direction was generated in the mortise structure on Ti side, and the Ti-Cu phases in the inner layer of mortise sidewall evolved from coarse columnar to spherical morphology. The results showed that the mortise structure significantly improved the strength of joints. The joint with mortise structure had a maximum tensile strength of 549 MPa, which was 93.8% of the strength of the stainless steel substrate. Simultaneously, the joint with mortise structure deformed significantly before failure, and the fracture surface revealed numerous dimples on the 316L side.Keywords
Funding Information
- National Natural Science Foundation of China (51674060, 52075074)
- Collaborative Innovation Centre of Major Machine Manufacturing in Liaoning
This publication has 32 references indexed in Scilit:
- Dissimilar metal joining of stainless steel and titanium using copper as transition metalThe International Journal of Advanced Manufacturing Technology, 2016
- Effect of Post-weld Heat Treatment on Properties of Friction Welded Joint Between TC4 Titanium Alloy and 40Cr Steel RodsJournal of Materials Science & Technology, 2015
- Dynamic strain aging studied at the atomic scaleActa Materialia, 2015
- Detachment of interfacial layers during arc-brazing of aluminum alloy to carbon steel with filler wireTransactions of Nonferrous Metals Society of China, 2013
- Formation of the structure of titanium and stainless steel in laser weldingWelding International, 2013
- Fe-Si-Ti (Iron-Silicon-Titanium)Journal of Phase Equilibria and Diffusion, 2009
- Cu-Fe-Ti (Copper-Iron-Titanium)Journal of Phase Equilibria and Diffusion, 2002
- Diffusion welding of SUS304L stainless steel to titaniumWelding International, 1996
- Friction welding of titanium and SUS 304L austenitic stainless steelWelding International, 1990
- Serrated plastic flowBulletin of Materials Science, 1984