Strength of sand in plane strain conditions: insights from legacy experimental data
Preprint
- 19 September 2025
- preprint
- Published by Springer Nature in Research Square
Abstract
The plane strain assumption is widely used in geotechnical engineering for boundary value problems such as retaining structures and embankments. In practice, the peak friction angle of cohesionless soils under plane strain conditions is frequently approximated by increasing the friction angle obtained from triaxial compression tests by a factor 9/8 to account for the experimentally observed strength surplus. This paper demonstrates, both theoretically and experimentally, that this factor is neither constant nor consistently conservative. Using a comprehensive database of legacy experiments -including both independent stress control and plane strain tests, with matching triaxial compression data- a multi-linear regression analysis is performed to identify key predictors of the plane strain strength surplus. In addition to relative density and confining stress, two geometric parameters are significant: (i) the ratio of sample height to the height for a shear band to freely develop across the sample, and (ii) the ratio of sample height to sample length (distance between the zero strain boundaries). Based on these findings, two empirical relations are proposed for estimating the plane strain strength surplus as a function of relative density and confining stress, conditioned on typical sample geometries: one for uniform strain conditions and one for localized strain conditions. A case study on slope stability demonstrates that the effect of selecting either of these empirical relations on the calculated factor of safety is comparable to (in)adequately capturing localized strain behavior in the model environment. This highlights that the appropriate plane strain strength surplus depends both on soil state and the model’s capacity to capture localized strain behavior.Keywords
All Related Versions
This publication has 73 references indexed in Scilit:
- Observations on the extended Matsuoka–Nakai failure criterionInternational Journal for Numerical and Analytical Methods in Geomechanics, 2009
- Assessment of test data for selection of 3-D failure criterion for sandInternational Journal for Numerical and Analytical Methods in Geomechanics, 2005
- Modelling the shear strength of soils in the general stress spaceComputers and Geotechnics, 2004
- Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetryInternational Journal for Numerical and Analytical Methods in Geomechanics, 2004
- An experimental investigation of the relationships between grain size distribution and shear banding in sand2001
- Discontinuous bifurcations of elastic-plastic solutions at plane stress and plane strainInternational Journal of Plasticity, 1991
- The effect of the plastic potential in boundary value problems involving plane strain deformationInternational Journal for Numerical and Analytical Methods in Geomechanics, 1984
- Shear band inclination and shear modulus of sand in biaxial testsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1980
- Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfacesInternational Journal of Solids and Structures, 1977
- Conditions for the localization of deformation in pressure-sensitive dilatant materialsJournal of the Mechanics and Physics of Solids, 1975