Vahid Galavi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vahid Galavi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Stastny
DB InfraGO AG, Munich, Germany
1 shared publication Cesar Garcia Quirante
1 shared publication- Cornelis Vuik
Delft Institute of Applied Mathematics, Delft University of Technology, 2628 CD Delft, The Netherlands
1 shared publication - Elizaveta Wobbes
Delft University of Technology
1 shared publication - Franz Tschuchnigg
Graz University of Technology
1 shared publication - Gertraud Medicus
University of Innsbruck * Institute of Infrastructure, Unit of Geotechnical Engineering, Group for Numerical and Experimental Soil Mechanics Innsbruck
1 shared publication
Latest Publications
- Open Access
- 19 September 2025
- Published by Springer Nature in Research Square
Strength of sand in plane strain conditions: insights from legacy experimental data
The plane strain assumption is widely used in geotechnical engineering for boundary value problems such as retaining structures and embankments. In practice, the peak friction angle of cohesionless soils under plane strain conditions is frequently approximated by increasing the friction angle obtained from triaxial compression tests by a factor 9/8 to account for the experimentally observed strength surplus. This paper demonstrates, both theoretically and experimentally, that this factor is neither constant nor consistently conservative. Using a comprehensive database of legacy experiments -including both independent stress control and plane strain tests, with matching triaxial compression data- a multi-linear regression analysis is performed to identify key predictors of the plane strain strength surplus. In addition to relative density and confining stress, two geometric parameters are significant: (i) the ratio of sample height to the height for a shear band to freely develop across the sample, and (ii) the ratio of sample height to sample length (distance between the zero strain boundaries). Based on these findings, two empirical relations are proposed for estimating the plane strain strength surplus as a function of relative density and confining stress, conditioned on typical sample geometries: one for uniform strain conditions and one for localized strain conditions. A case study on slope stability demonstrates that the effect of selecting either of these empirical relations on the calculated factor of safety is comparable to (in)adequately capturing localized strain behavior in the model environment. This highlights that the appropriate plane strain strength surplus depends both on soil state and the model’s capacity to capture localized strain behavior.
- 19 September 2025
- Published by Springer Nature in Research Square
Open AccessStrength of sand in plane strain conditions: insights from legacy experimental data
The plane strain assumption is widely used in geotechnical engineering for boundary value problems such as retaining structures and embankments. In practice, the peak friction angle of cohesionless soils under plane strain conditions is frequently approximated by increasing the friction angle obtained from triaxial compression tests by a factor 9/8 to account for the experimentally observed strength surplus. This paper demonstrates, both theoretically and experimentally, that this factor is neither constant nor consistently conservative. Using a comprehensive database of legacy experiments -including both independent stress control and plane strain tests, with matching triaxial compression data- a multi-linear regression analysis is performed to identify key predictors of the plane strain strength surplus. In addition to relative density and confining stress, two geometric parameters are significant: (i) the ratio of sample height to the height for a shear band to freely develop across the sample, and (ii) the ratio of sample height to sample length (distance between the zero strain boundaries). Based on these findings, two empirical relations are proposed for estimating the plane strain strength surplus as a function of relative density and confining stress, conditioned on typical sample geometries: one for uniform strain conditions and one for localized strain conditions. A case study on slope stability demonstrates that the effect of selecting either of these empirical relations on the calculated factor of safety is comparable to (in)adequately capturing localized strain behavior in the model environment. This highlights that the appropriate plane strain strength surplus depends both on soil state and the model’s capacity to capture localized strain behavior.
- Open Access
- 19 May 2025
- Published by Springer Nature in Acta Geotechnica
- Vol. 20 (9) , 4385-4410
Evaluation of advanced soil models for the cyclic soil-structure interaction of integral bridges
Integral bridges with longer spans experience an increased cyclic interaction with their granular backfills, particularly due to seasonal thermal fluctuations. To accurately model this interaction behaviour under cyclic loading, it is crucial to employ appropriate constitutive models and meticulously calibrate and test them. For this purpose, in this paper two advanced elastoplastic (DeltaSand, Sanisand-MS) and two hypoplastic (Hypo+IGS, Hypo+ISA) constitutive models with focus on small strain and cyclic behaviour are investigated. The soil models are calibrated based on a comprehensive laboratory programme of a representative highly compacted gravel backfill material for bridges. The calibration procedure is shown in detail and the model capabilities and limitations are discussed on the element test level. Additional triaxial tests with repeated un- and reloading reveal significant over- and undershooting effects for the majority of the investigated material models. Finally, cyclic finite element analyses on the soil-structure interaction of an integral bridge are conducted to compare the performance of the soil models. Qualitatively similar cyclic evolution of earth pressures are detected for the soil models at various bridge lengths and test settings. However, a substantially different cyclic settlement behaviour is observed. Additionally, the investigation highlights severe overshooting effects associated with the tested hypoplastic soil models. This phenomenon is studied in detail using a single integration point analysis. Supplementary studies reveal that the foot point deformation of the abutment significantly influences the lateral passive stress mobilisation and the amount of its increase with growing seasonal cycles.
- 19 May 2025
- Published by Springer Nature in Acta Geotechnica
- Vol. 20 (9) , 4385-4410
Open AccessEvaluation of advanced soil models for the cyclic soil-structure interaction of integral bridges
Integral bridges with longer spans experience an increased cyclic interaction with their granular backfills, particularly due to seasonal thermal fluctuations. To accurately model this interaction behaviour under cyclic loading, it is crucial to employ appropriate constitutive models and meticulously calibrate and test them. For this purpose, in this paper two advanced elastoplastic (DeltaSand, Sanisand-MS) and two hypoplastic (Hypo+IGS, Hypo+ISA) constitutive models with focus on small strain and cyclic behaviour are investigated. The soil models are calibrated based on a comprehensive laboratory programme of a representative highly compacted gravel backfill material for bridges. The calibration procedure is shown in detail and the model capabilities and limitations are discussed on the element test level. Additional triaxial tests with repeated un- and reloading reveal significant over- and undershooting effects for the majority of the investigated material models. Finally, cyclic finite element analyses on the soil-structure interaction of an integral bridge are conducted to compare the performance of the soil models. Qualitatively similar cyclic evolution of earth pressures are detected for the soil models at various bridge lengths and test settings. However, a substantially different cyclic settlement behaviour is observed. Additionally, the investigation highlights severe overshooting effects associated with the tested hypoplastic soil models. This phenomenon is studied in detail using a single integration point analysis. Supplementary studies reveal that the foot point deformation of the abutment significantly influences the lateral passive stress mobilisation and the amount of its increase with growing seasonal cycles.
- 1 November 2024
- Published by Emerald Publishing in Géotechnique
- Vol. 74 (12) , 1343-1359
A state-dependent multilaminate constitutive model for anisotropic sands
Experimental studies show that initial fabric and its evolution under different stress paths greatly influences soil behaviour. Even though different sample preparation methods create different inherent anisotropies and cause different material responses, the same initial fabric structure under different stress paths also results in different material behaviours. In this paper, a simple state-dependent, bounding surface-based elastoplastic constitutive model, which can simulate the anisotropic nature of sands including the effect of principal stress rotation, is described. The model is developed based on a semi-micromechanical concept within the multilaminate framework and, to include the inherent anisotropy of sand, a deviatoric fabric tensor describing the initial microstructure is introduced. In addition, a fabric evolution rule compatible with anisotropic critical state theory is employed to describe the evolving fabric structure and induced anisotropy towards the critical state. In contrast to the classical strain-driven formulation for fabric evolution, a micro-level evolution rule is proposed. This paper presents concise theoretical aspects of the multilaminate framework and the anisotropic elastoplastic constitutive formulation. The model's capability under drained and undrained monotonic loading conditions at different stress states, relative densities and principal stress orientations is demonstrated by simulating experimental data for Toyoura sand.
- 1 November 2024
- Published by Emerald Publishing in Géotechnique
- Vol. 74 (12) , 1343-1359
A state-dependent multilaminate constitutive model for anisotropic sands
Experimental studies show that initial fabric and its evolution under different stress paths greatly influences soil behaviour. Even though different sample preparation methods create different inherent anisotropies and cause different material responses, the same initial fabric structure under different stress paths also results in different material behaviours. In this paper, a simple state-dependent, bounding surface-based elastoplastic constitutive model, which can simulate the anisotropic nature of sands including the effect of principal stress rotation, is described. The model is developed based on a semi-micromechanical concept within the multilaminate framework and, to include the inherent anisotropy of sand, a deviatoric fabric tensor describing the initial microstructure is introduced. In addition, a fabric evolution rule compatible with anisotropic critical state theory is employed to describe the evolving fabric structure and induced anisotropy towards the critical state. In contrast to the classical strain-driven formulation for fabric evolution, a micro-level evolution rule is proposed. This paper presents concise theoretical aspects of the multilaminate framework and the anisotropic elastoplastic constitutive formulation. The model's capability under drained and undrained monotonic loading conditions at different stress states, relative densities and principal stress orientations is demonstrated by simulating experimental data for Toyoura sand.
- Open Access
- 3 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Practical considerations for numerical simulation of large-diameter monopiles for offshore wind turbines in overconsolidated sand: A case study of the VIBRO project in Cuxhaven, Germany
- 3 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Open AccessPractical considerations for numerical simulation of large-diameter monopiles for offshore wind turbines in overconsolidated sand: A case study of the VIBRO project in Cuxhaven, Germany
- 1 January 2021
- Published by Elsevier in Computers and Geotechnics
- Vol. 129
DeltaSand: A state dependent double hardening elasto-plastic model for sand: Formulation and validation
- 1 January 2021
- Published by Elsevier in Computers and Geotechnics
- Vol. 129
DeltaSand: A state dependent double hardening elasto-plastic model for sand: Formulation and validation
- Open Access
- 19 September 2018
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 117 (3) , 271-290
Conservative Taylor least squares reconstruction with application to material point methods
Summary: Within the standard material point method (MPM), the spatial errors are partially caused by the direct mapping of material‐point data to the background grid. In order to reduce these errors, we introduced a novel technique that combines the least squares method with the Taylor basis functions, called the Taylor least squares (TLS), to reconstruct functions from scattered data while preserving their integrals. The TLS technique locally approximates quantities of interest such as stress and density, and when used with a suitable quadrature rule, it conserves the total mass and linear momentum after transferring the material‐point information to the grid. The integration of the technique into MPM, dual domain MPM, and B‐spline MPM significantly improves the results of these methods. For the considered examples, the TLS function reconstruction technique resembles the approximation properties of highly accurate spline reconstruction while preserving the physical properties of the standard algorithm.
- 19 September 2018
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 117 (3) , 271-290
Open AccessConservative Taylor least squares reconstruction with application to material point methods
Summary: Within the standard material point method (MPM), the spatial errors are partially caused by the direct mapping of material‐point data to the background grid. In order to reduce these errors, we introduced a novel technique that combines the least squares method with the Taylor basis functions, called the Taylor least squares (TLS), to reconstruct functions from scattered data while preserving their integrals. The TLS technique locally approximates quantities of interest such as stress and density, and when used with a suitable quadrature rule, it conserves the total mass and linear momentum after transferring the material‐point information to the grid. The integration of the technique into MPM, dual domain MPM, and B‐spline MPM significantly improves the results of these methods. For the considered examples, the TLS function reconstruction technique resembles the approximation properties of highly accurate spline reconstruction while preserving the physical properties of the standard algorithm.
- Open Access
- 1 January 2005
- Published by IOS Press
- p. 971-974
FE-analysis of deep excavations in lacustrine clay with different constitutive models
In this paper finite element analyses of deep excavations in soft ground in the city of Salzburg, Austria are presented. The regional subsoil situation in Salzburg can be described as fully saturated soft clay (referred to as “Seeton”) overlain by a quaternary gravel fill. The poorly graded Seeton can be classified as fine silt or fine sand respectively and shows unfavourable soil properties with respect to the deformation behaviour of deep excavations. Common calculation methods for retaining structures based on failure criterions like Mohr-Coulomb cannot take into account this complex behaviour adequately. Therefore more advanced constitutive models have been used in analysing two different deep excavations in Salzburg. Firstly the Hardening Soil model, an isotropic double hardening model as implemented in the commercial version of finite element code Plaxis and secondly a newly developed constitutive model based on the multilaminate concept. The comparison with in situ measurements showed that both models are capable of representing the behaviour of soft soils, at least for this type of problems.
- 1 January 2005
- Published by IOS Press
- p. 971-974
Open AccessFE-analysis of deep excavations in lacustrine clay with different constitutive models
In this paper finite element analyses of deep excavations in soft ground in the city of Salzburg, Austria are presented. The regional subsoil situation in Salzburg can be described as fully saturated soft clay (referred to as “Seeton”) overlain by a quaternary gravel fill. The poorly graded Seeton can be classified as fine silt or fine sand respectively and shows unfavourable soil properties with respect to the deformation behaviour of deep excavations. Common calculation methods for retaining structures based on failure criterions like Mohr-Coulomb cannot take into account this complex behaviour adequately. Therefore more advanced constitutive models have been used in analysing two different deep excavations in Salzburg. Firstly the Hardening Soil model, an isotropic double hardening model as implemented in the commercial version of finite element code Plaxis and secondly a newly developed constitutive model based on the multilaminate concept. The comparison with in situ measurements showed that both models are capable of representing the behaviour of soft soils, at least for this type of problems.