Effect of environmental humidity on the creep behavior of flax fiber‐reinforced polymer composites
Authors:
Open Access
- 11 July 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (9) , 6108-6121
Abstract
Flax fiber‐reinforced polymer (FFRP) composites are emerging popular environmental‐friendly construction materials. However, their significant creep properties have been a major concern for using FFRP in load‐bearing structures. This article presents an investigation of the effect of environmental humidity on the creep behavior of the FFRP. Samples with flax fiber in 0°, 90°, and ± 45° were manufactured, respectively, by the vacuum infusion method. Accelerated creep tests were conducted on samples in different relative humidities (RH), and the results were analyzed by the time–temperature superposition principle (TTSP). It is found the creep development of samples with 0° and 90° fiber increases with the RH, and their 30‐year total strain in 97% RH is about 10 times higher than that in 11% RH. The samples with ±45° fiber are found not obviously sensitive to the humidity change. The scanning electron microscope (SEM) check indicates the change in the fiber–matrix interface and cracks between microfibrils in a fiber bundle is the main reason for the change of creep behavior in high humidity. This study may benefit the design of structures made of natural fiber‐reinforced polymer composites, especially for load‐bearing structures working in high‐humidity environments.Keywords
Funding Information
- China Scholarship Council
This publication has 42 references indexed in Scilit:
- Flax fibre and its composites – A reviewComposites Part B: Engineering, 2014
- Effects of the hygrothermal environment on the mechanical properties of flax fibresJournal of Composite Materials, 2013
- Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy compositeComposites Part B: Engineering, 2013
- Critical review of recent publications on use of natural composites in infrastructureComposites Part A: Applied Science and Manufacturing, 2012
- Creep and dynamic mechanical behavior of PP–jute composites: Effect of the interfacial adhesionComposites Part A: Applied Science and Manufacturing, 2007
- Creep behavior of carbon fiber/epoxy matrix compositesMaterials Science and Engineering: A, 2006
- Moisture effects on FM300 structural film adhesive: Stress relaxation, fracture toughness, and dynamic mechanical analysisJournal of Applied Polymer Science, 2005
- Effects of Moisture and Stresses on the Structure and Properties of Polyester ResinMechanics of Composite Materials, 2004
- Moisture Absorption and Desorption of Composite MaterialsJournal of Composite Materials, 1976
- The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming LiquidsJournal of the American Chemical Society, 1955