Research on the Dynamic Calibration of Thermocouple and Temperature Excitation Signal Generation Method Based on Shock-Tube Theory
- 18 February 2014
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 136 (7) , 071602
Abstract
This paper introduces the equipment for generating an excitation signal during the process of thermocouple dynamic calibration in air medium, with the objective of dealing with the problems existing extensively in the excitation signal of incapable assessment of the rising time and inaccuracy in the traceability for the step amplitude. Based on the shock-tube theory, the step-temperature excitation signal that is suitable for the dynamic calibration of the thermocouple with appreciable rising time, wide-frequency bandwidth, and traceable step amplitude can be generated by means of the improvement in the structure of the traditional shock tube as well as the compensation of the shock-tube parameters. Through on-site assessment experimentation and dynamic modeling of the thermocouple, the time constant of the thermocouple can be obtained and the dynamic response of the thermocouple can be modified and compensated, the calibration result of which shows that the dynamic calibration method of the thermocouple proposed in this paper can be implemented for different ranges of frequencies and different phases of the temperature sensor with high reliability; moreover, the calibration equipment is miniaturized.Keywords
This publication has 10 references indexed in Scilit:
- Shock tube study of the pressure dependence of monomethylhydrazine pyrolysisCombustion and Flame, 2014
- Nonlinear time constant estimation and dynamic compensation of temperature sensorsControl Engineering Practice, 2010
- Measuring transient temperature of the medium in power engineering machines and installationsApplied Thermal Engineering, 2009
- In Situ Two-Thermocouple Sensor Characterisation using Cross-Relation Blind Deconvolution with Signal Conditioning for Improved RobustnessLecture Notes in Electrical Engineering, 2008
- Fluctuating temperature measurement by a fine-wire thermocouple probe: influences of physical properties and insulation coating on the frequency responseMeasurement Science and Technology, 2007
- Simultaneous calibration of a large number of thermocouplesIEEE Transactions on Instrumentation and Measurement, 2002
- Two-wire thermocouples: A nonlinear state estimation approach to temperature reconstructionReview of Scientific Instruments, 2001
- Two-thermocouple probe for fluctuating temperature measurement in combustion—Rational estimation of mean and fluctuating time constantsCombustion and Flame, 1997
- Dynamic Pressure MetrologyMetrologia, 1994
- Development of a Primary Standard for the Measurement of Dynamic Pressure and TemperatureMetrologia, 1994