Fuel rod design for a high burnup small modular nuclear reactor
Open Access
- 30 June 2025
- journal article
- Published by Universidad Nacional Autonoma de Mexico in Journal of Applied Research and Technology
- Vol. 23 (3) , 233-239
Abstract
PWR is a type of nuclear reactor that is widely used as a nuclear power plant. Even though PWR has been around for a long time, technology continues to develop. The direction of development of PWR technology is to create a more compact design with a modular system (SMR) and more efficient fuel. More efficient fuel can be obtained by increasing fuel burnup. By increasing burnup, the fuel usage period is longer, thereby increasing the economic value of the fuel and reducing the volume of radioactive waste produced from spent fuel. High burnup means the fuel will be exposed to radiation for longer. Therefore, it is necessary to calculate both thermal and mechanical aspects with the new fuel rod design, to see whether the fuel can be used until the end of the fuel cycle. Calculations wereconducted using the Femaxi version 6 code. From the calculation results, it was obtained that the dimensions of the fuel rods were capable of reaching a burnup of 60 GWd/TU. The dimensions obtained include the diameter and length of the pellets of 7.4 mm and 10 mm, the diameter and depth of the disc of 4.7 mm and 0.51 mm, and the inner and outer diameters of the cladding of 7.8 mm and 9.3 mm. The calculation results show that the temperature distribution in the fuel rods during reactor operation is still within safe limits, and pellet cladding interaction (PCI) does not occur until the end of the fuel consumption cycle.Keywords
This publication has 11 references indexed in Scilit:
- A review on the thermo-mechanical modelling needs in system codesNuclear Engineering and Design, 2023
- A review of the development of nuclear fuel performance analysis and codes for PWRsAnnals of Nuclear Energy, 2021
- Pellet-cladding mechanical interaction analysis of heavy water fuel rods under power rampsAnnals of Nuclear Energy, 2021
- Effect of power history on pellet-cladding interactionNuclear Engineering and Design, 2020
- PEMODELAN DAN SIMULASI KINERJA PIN UJI BAHAN BAKAR PWR DENGAN UO2 DIPERKAYAUrania: Jurnal Ilmiah Daur Bahan Bakar Nuklir, 2019
- A review of fuel performance modellingJournal of Nuclear Materials, 2019
- Model updates and performance evaluations on fuel performance code FEMAXI-8 for light water reactor fuel analysisJournal of Nuclear Science and Technology, 2019
- Mechanistic materials modeling for nuclear fuel performanceAnnals of Nuclear Energy, 2017
- IRRADIATION CHARACTERISTIC OF NATURAL UO2 PIN PHWR TARGET AT PRTF OF RSG – GAS COREJURNAL TEKNOLOGI REAKTOR NUKLIR TRI DASA MEGA, 2017
- Fuel Thermo-Mechanical Performance during Transient Events in Laguna Verde Nuclear Power Plant with FETMA CodeInternational Journal of Nuclear Energy Science and Engineering, 2014