A novel ammonia combustion concept enabled by high-pressure hydrogen jet ignition: Ignition, flame evolution, and emission characteristics

Authors:

Abstract
Ammonia is a promising carbon-free fuel for internal combustion engines, yet its low flame speed and poor ignitability severely restrict practical application. To address these challenges, this study proposes a novel ammonia combustion mode based on in-cylinder high-pressure hydrogen direct injection coupled with spark-induced jet ignition. Compared with pre-chamber combustion systems, this approach offers superior stability and greater potential for achieving higher combustion efficiency, benefiting from advantages including multi-pulse ignition capability, pre-injection of hydrogen, stratified combustion, and avoidance of cold-start issues. A systematic experimental investigation is performed in a constant volume combustion vessel to comprehensively explore the combustion behaviors of premixed ammonia ignited by high-pressure hydrogen jet. Four key parameters are varied: hydrogen injection pressure (3.0-9.0 MPa), ammonia equivalence ratio (0-1.0), ignition timing (2.5/4.0 ms after start of injection), and ignition position (six axial/radial locations). Key findings reveal that ignition during hydrogen injection promotes flame kernel development over post-injection ignition, though positions away from nozzle/axis are required to avoid jet-induced extinction. Higher injection pressure enhances hydrogen supply and turbulence, accelerating early heat release. Lean ammonia mixtures benefit initial ignition via higher local oxygen, while late-stage performance is governed by ammonia concentration. Stoichiometric ammonia and higher pressure reduce unburned NH3. Notably, this novel mode achieves ~96% combustion efficiency when ammonia energy ratio of 99.3%. Further improvements in ammonia energy ratio and combustion efficiency could be expected in practical engines by adopting strategies such as early hydrogen injection and multi-stage injection.