Effect of Ultrasonic Treatment on Chemical Stripping Behavior of Aluminum Coating on K6509 Co-Based Superalloy
Open Access
Abstract
In this study, 10% nitric acid was employed to remove the aluminum coating on the cobalt-based superalloy K6509, with a focus on elucidating the corrosion mechanism and evaluating the effect of ultrasonic on the removal process. The results shows that ultrasonic treatment (40 kHz) significantly improves coating removal efficiency, increasing the maximum corrosion rate by 46.49% from 2.5413 × 10−7 g·s−1·mm−2 to 4.7488 × 10−7 g·s−1·mm−2 and reducing removal time from 10 min to 6 min. This enhancement is attributed to cavitation effect of ultrasonic bubbles and the shockwave-accelerated ion diffusion, which together facilitate more efficient coating degradation and results in a smoother surface. In terms of corrosion behavior, the difference in phase composition between the outer layer and the interdiffusion zone (IDZ) plays a decisive role. The outer layer is primarily composed of β-(Co,Ni)Al phase, which is thermodynamically less stable in acidic environments and thus readily dissolves in 10% HNO3. In contrast, the IDZ mainly consists of Cr23C6, which exhibit high chemical stability and a strong tendency to passivate. These characteristics render the IDZ highly resistant to nitric acid attack, thereby forming a protective barrier that limits acid penetration and helps maintain the integrity of the substrate.Keywords
Funding Information
- Hunan Province’s ‘Leading the Charge with Open Competition’ Project
This publication has 56 references indexed in Scilit:
- Laser-induced removal of thermal control coatings on aluminum alloy surfaces: Thermal-impact coupling effects and processesApplied Surface Science, 2025
- A multi-scale framework for life reduction assessment of turbine blade caused by microstructural degradationChinese Journal of Aeronautics, 2023
- Removal mechanism of laser cleaning for inorganic thermal control coatings on aluminum alloysApplied Surface Science, 2023
- Effect of pre-oxidation on the electrochemical corrosion behavior of Ni-based coating reinforced by ceramic particlesCeramics International, 2023
- Effect of Long-Term Immersion on the Corrosion and Passivation Behavior of Lean Duplex Stainless Steel 2101 in 3.5 wt% NaCl SolutionMetals and Materials International, 2022
- High-temperature oxidation behaviour of refurbished (Ni,Pt)Al coating on Ni-based superalloy at 1100 °CCorrosion Science, 2021
- High temperature oxidation and interdiffusion behavior of recoated NiCoCrAlY coating on a nickel-based superalloyCorrosion Science, 2020
- A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta additionActa Materialia, 2015
- Cyclic oxidation of high temperature coatings on new γ′-strengthened cobalt-based alloysCorrosion Science, 2013
- Controlled stripping of aluminide coatings on nickel superalloys through electrolytic techniquesJournal of Applied Electrochemistry, 2008