Improved Power Quality Charging System Based on High Step-Down Gain Bridgeless SEPIC APFC for Light Electric Vehicles
- 14 October 2021
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (1) , 423-434
Abstract
The limited voltage gain characteristic of the mainstream dc–dc converter restricts the application in single-stage light electric vehicles’ (LEVs) chargers. Typically, the battery voltage of an LEV is in the range from 24 to 72 V. Thus, while implementing the single-stage LEVs’ chargers, a line- or high-frequency transformer is essentially required. The utilization of transformer, however, compromises the overall cost, size, and efficiency of LEV chargers. Therefore, a transformerless single-stage bridgeless charger topology is presented in this article, aiming to realize a simple, reliable, efficient, and low-cost charger for the LEVs. The presented topology utilizes a switched inductor single ended primary inductance converter (SISEPIC) to achieve a high step-down dc voltage gain. Furthermore, the active power factor correction is incorporated to ensure enhanced power quality (low total harmonics distortion and unity power factor) at the ac supply side during constant current and constant voltage state charging. Additionally, this charger is controlled by employing reduced sensing devices and control complexities. Both simulation and experimental validations are provided to manifest the effectiveness of this SISEPIC charger topology for LEVs.Keywords
Funding Information
- National Science Chair Fellowship
This publication has 33 references indexed in Scilit:
- Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converterIET Power Electronics, 2015
- Modeling and control of a tapped-inductor buck converter with pulse frequency modulation2014
- A Fully Integrated Three-Level Isolated Single-Stage PFC ConverterIEEE Transactions on Power Electronics, 2014
- Single‐stage battery charger for light electric vehicles based on DC‐SRC with current‐boosting circuitElectronics Letters, 2013
- 6.6-kW Onboard Charger Design Using DCM PFC Converter With Harmonic Modulation Technique and Two-Stage DC/DC ConverterIEEE Transactions on Industrial Electronics, 2013
- Power quality and standards2012
- A New Single-Phase Single-Stage Three-Level Power Factor Correction AC–DC ConverterIEEE Transactions on Power Electronics, 2011
- On-board battery charger for PHEV without high-voltage electrolytic capacitorElectronics Letters, 2010
- A Modified SEPIC Converter for High-Power-Factor Rectifier and Universal Input Voltage ApplicationsIEEE Transactions on Power Electronics, 2009
- Recent advances in single-stage power factor correction2004