JGJitendra Gupta

Jitendra Gupta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jitendra Gupta has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Multipurpose Bidirectional Onboard Charger with Wide Voltage Range and G2V/V2G/V2H Power Exchange Features for Electric Two/Three Wheelers

    by Jitendra Gupta, Bhim Singh

    A bidirectional onboard charger (BOBC) with multipurpose and wide operational range capability is showcased for electric 2/3 wheelers (E2/3Ws) applications. BOBC satisfies E2/3Ws’ batteries charging demand through its grid to E2/3Ws, i.e., G2V mode, and ensures active/reactive power support to grid through its E2/3Ws to grid, i.e., V2G mode. Besides G2V and V2G power transfer capability, presented BOBC replicates a domestic inverter system (DIS) through its E2/3Ws to home, i.e., V2H mode, and thus, satisfactorily powers up essential domestic loads under grid failure and absolute necessity situations. With V2H mode, presented BOBC provides support to those E2/3Ws owners who cannot afford the cost of DIS and suffer intermittent supply conditions. Further, BOBC’s wide output voltage range feature ensures its suitability to different E2/3Ws with heterogeneous battery packs, and thus, considerably lowers its cost of production. Notably, BOBC incorporates a voltage source converter and an active switched inductor buck-boost (ASIBB) converter at its front and back ends, respectively, to guarantee desirable performance at its respective supply and E2/3Ws battery packs ends. A simple yet robust control architecture, taking healthy/unhealthy grid conditions and battery packs' demands into consideration, is developed for satisfactory operation of BOBC in G2V/V2G /V2H modes. Finally, the overall performance of BOBC is analyzed and validated through software and proof of concept hardware implementations, and corresponding results are discussed in detail.


  • Integrated Bridgeless Totem-Pole PFC Converter with Dual-Output Supply for Four Phase SRM Drives in Household Appliances

    by Vipin Kumar Singh, Jitendra Gupta, Bhim Singh

    Conventional switched reluctance motor (SRM) drives, which employ diode bridge rectifiers (DBR) present various performance drawbacks, such as low power factor (PF), high input current total harmonic distortion (THD), and increased cost, rendering them less appropriate for contemporary energy-efficient applications. This paper presents a high-power quality (PQ) front-end converter utilizing an integrating single-ended primary-inductor converter (SEPIC) topology combined with a bridgeless totem-pole structure to address dual output challenge as required by mid-point converter (MPC) powered SRM drive. Converter is designed to provide a midpoint-based four-phase SRM drive through a single-input, dual-output configuration. Converter functions in discontinuous conduction mode (DCM), enabling natural power factor correction (PFC) without requiring for grid current sensing, which simplifies control and improves reliability. The converter's operating principle and conditions for zero-current switching (ZCS) are investigated analytically. A voltage controller controls balanced split outputs ranging from 100 V to 300 V, facilitating wide motor speed regulation. Simulation and experimental results across a range of grid inputs (160–260 V RMS) demonstrate improved power quality and reliable performance of SRM, thereby validating presented converter design for SRM drives intended for low-power household applications.

  • Totem Pole Dual Output Bridgeless Rectifier for High-Performance Low Power SRM Drive

    by Vipin Kumar Singh, Bhim Singh, Jitendra Gupta

    This article presents the analysis and design of totem pole bridgeless dual output (TPBLDO) power factor correction (PFC) converter to improve power quality of switched reluctance motor (SRM) system used in low-power applications. To provide efficient PFC with supply fluctuation and variable dc link voltage for SRM drive speed regulation, presented TPBLDO rectifier incorporates a nonisolated ac–dc converter. Here, the TPBLDO rectifier is designed to work in discontinuous mode, ensuring compliance with inherent grid power quality, reducing inductor size, and facilitating adaptability for low-power, low-cost applications by requiring only one sensor. In addition, DCM operation enables high-frequency diodes to be switched off and switches to be turned on with zero current, based on the zero current switching operation principle for the designed bridgeless dual output PFC converter. TPBLDO converter-assisted SRM drive’s working modes, component selection, and control are discussed in detail and its performance is initially verified with MATLAB simulation. Then, a proof-of-concept is validated through a hardware test bench at 400-W SRM drive. Finally, relevant results are outlined effectiveness in maintaining power quality as per IEC standard and wide-speed SRM control in low-power applications.


  • A Wide Output Voltage Range Onboard Charger for E-2Ws and E-3Ws With Bidirectional Power Flow Capability

    by Jitendra Gupta, Bhim Singh

    A wide output voltage range bidirectional onboard charger (BOC) with multipurpose functionalities, is realized in this work for E-2 wheelers (E-2Ws) and E-3 wheelers (E-3Ws) (collectively known as light duty electric vehicles, i.e., LDEVs). Presented BOC realizes desired real and reactive power flow between AC mains and LDEVs through grid to LDEVs (G-LDVEs or G2V) or LDEVs to grid (LDEVs-G or V2G) mode operation and, therefore, effectively converts LDEVs consumers into prosumers. Further, with wide output voltage range capability, i.e., from 36 V to 120 V, this charger establishes a universal BOC for diverse categories of LDEVs, and thus eliminates chaos at consumer’s end. For effectively realizing power transfer between low-voltage LDEV battery packs and high-voltage single-phase supply in wide voltage range conditions, presented BOC employs a bidirectional active switched capacitor buck-boost (BASCBB) DC-DC converter at battery end. BASCBB DC-DC stage exhibits a wide voltage transfer ratio, low switch voltage stress, minimum component count, low current ripple characteristics at input-output ends, and simple control, and thus, ensures effective charging/discharging of LDEVs battery over wide operating conditions. Besides, presented BOC employs a simple yet robust control for front-end active boost rectifier to ensure low harmonics distortion and desired power factor at AC side of charger at both healthy and unhealthy grid conditions. Finally, performance of BOC is tested through simulation and hardware, and relevant results are discussed and compared with existing solutions.


  • Design of Single-Stage Light Electric Vehicles Battery Charger Based on Isolated Bridgeless Modified SEPIC Converter With Reduced Switch Stress

    by Alakshyender Singh, Aswin Dilip Kumar, Jitendra Gupta, Bhim Singh

    An onboard charger (OBC) segment is currently dominated by two-stage charger designs, which suffer from drawbacks such as large size, low efficiency due to a high component count, elevated cost, and intricate controller requirements. To address these challenges, this work explores an implementation of an isolated bridgeless version of a modified Single-Ended Primary Inductor Converter (SEPIC). This innovative approach aims to develop a single-stage, high-power factor battery charger tailored for light electric vehicles (LEVs). In addition to achieving high power factor operation, maintaining continuous input and output currents, and enabling high voltage conversion ratios, this charger utilizing modified SEPIC converter is specifically engineered to alleviate voltage stress on power switches within converter circuit. This charger operates in discontinuous conduction mode (DCM), offering several notable advantages. These include inherent power factor correction (PFC) capability, reduced control effort, minimized size of magnetic components, and fewer sensors, ultimately leading to a significant reduction in overall implementation cost. This paper aims to validate charger's operation, elaborate on design of its components, outline control algorithm design, and to demonstrate performance of both components and control logic through test results from hardware prototype developed, for a power level of 500 W


  • A Fully Bridgeless Bidirectional Single Stage Isolated Battery Charger-Cum-Domestic Inverter System for LEVs Application

    by Jitendra Gupta, Bhim Singh

    This work presents a bidirectional battery charger (BC)-cum-domestic inverter system for light electric vehicles (LEVs) such as electric two-wheelers (E2Ws) and three-wheelers (E3Ws) applications. Presented BC incorporates a fully bridgeless bidirectional single stage isolated SEPIC AC-DC converter to enable effective power transfer between grid/loads and battery packs through its grid-vehicle (G2V), vehicle-grid (V2G) and vehicle-load (V2L) mode operation, and thus, not only serves purpose of battery charger but also replicates features of home inverter system. Notably, discontinuous current mode design of presented BC enables zero current switching of semiconductor devices. It eliminates supply current sensor requirement, guaranteeing simple and low-cost control implementation. Presented BC exhibits unity power factor operation and limited harmonics distortions at AC mains while transferring power between AC mains and battery packs, i.e., under G2V and V2G modes of operation. Moreover, it generates a sinusoidal voltage at AC terminals during V2L modes, thus ensuring clean power to connected loads. Further, low device count, simple control, and isolation features demonstrate excellent suitability of presented BC in LVEVs charging applications. Operating principle, design, and control of presented BC-cum-domestic inverter system are discussed in detail, and finally, its performance is validated through software simulation and hardware implementation, and relevant results are presented for verifying its performance.


  • A Bridgeless Modified Switched-Inductor SEPIC High Power Factor Rectifier With Extended Voltage Transfer Ratio for Low Voltage Battery Charging Applications

    by Aswin Dilip Kumar, Jitendra Gupta, Bhim Singh

    This paper presents a modified single-ended primary inductance converter (SEPIC) based single-stage ACDC converter designed specifically for low voltage electric vehicles (LVEVs) charger applications. The rectifier showcases in this study demonstrates a high-step down buck gain, making it ideal for charging low-voltage battery packs commonly found in LVEVs. By utilizing a bridgeless structure at the input side with simultaneously operated switches, the converter reduces control complexity and eliminates the need for input voltage polarity sensing, a requirement in conventional continuous inductor current mode (CICM) converters. The converter's extended step-down gain is achieved through switched-inductor structures, enabling it to deliver the required battery charging profile for low-voltage battery packs. Operating the inductors in discontinuous inductor current mode (DICM) not only facilitates intrinsic power factor correction (PFC) capabilities at the grid side but also reduces the size of magnetic components. DICM operation also provides zero-current turn-on for switches and zero-current turn-off capability for high-frequency diodes, thereby minimizing losses associated with diode reverserecovery transitions. During testing on a proof-of-concept testbench at a power level of 450W, the converter demonstrated a peak efficiency of 94.2% at rated power. Additionally, the total harmonic distortion (THD) in input current was measured at 3.4%, showcasing a unity power factor and good power quality (PQ) indices at the grid. These results highlight the effectiveness of the converter in maintaining proper battery charging profiles while ensuring high efficiency and power quality standards in LVEV charging applications.


  • Isolated Power Factor Corrected High-Gain AC–DC Buck-Boost Converter-Based Single-Stage LEV Battery Charger

    by Alakshyender Singh, Jitendra Gupta, Bhim Singh

    A single-stage on-board charger for light electric vehicle (LEV) batteries, based on an isolated high step-down gain bridgeless AC-DC buck-boost converter, is presented in this study. This charger offers several advantages over a conventional two-stage charger, which include reduction in overall component count, reduced cost and size, elimination of electrolytic DC Link capacitor, reduction in control effort, and better dynamic voltage regulation. An overall efficiency of presented charger is enhanced by using bridgeless configuration of converter, which reduces conduction losses associated with a diode bridge rectifier. Additionally, converter is designed to operate in discontinuous conduction mode (DCM), which accords charger supplementary benefits of zero current switching to one diode and two switches of converter without a use of any auxiliary circuit. DCM operation leads to diminished size of magnetics and further, facilitates reduction of number of sensors required and control effort for implementation of various charging methodologies viz. constant current (CC) and constant voltage (CV). At supply end, charger operates at high power factor while exhibiting high voltage conversion ratio. This study authenticates feasibility of charger and its performance during both steady and dynamic states using simulations. Practical implementation and validation of theoretical features of charger are undertaken using a 450 W test bench setup, which attempts to emulate simulated results in real time environment