Optimizing heat transfer in microchannel heat ex-changers: a comparative analysis of channel geometry and nanofluids through CFD and experimental approaches
- 26 February 2025
- journal article
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (1) , 015562
Abstract
This study uses CFD simulations and experimental methods to investigate the impact of channel geometry and nanofluid concentration on heat transfer performance in microchannel heat exchangers. Results show that increasing nanoparticle concentrations and mass flow rates enhance heat transfer in rectangular and circular channels. At a nanoparticle concentration of 0.05% and a Reynolds number of 500, circular channels demonstrated superior heat transfer performance compared to rectangular channels. Nusselt numbers increased by 18.16% for rectangular and 24.55% for circular channels on average. Pressure drops for both geometries also increased, with a 17.57% rise for rectangular and 16.74% for circular channels relative to the base fluid. Additionally, the pressure drop was 4.72% higher in rectangular channels than in circular ones. Lower Reynolds numbers significantly reduced friction factors, with the minimum friction observed at 0.01% nanofluid concentration. Circular channels exhibited lower friction than rectangular channels across different nanofluid concentrations. CFD and experimental results were in close agreement, particularly regarding pressure drop and temperature, confirming the accuracy of the analysis.Keywords
This publication has 26 references indexed in Scilit:
- Systematic design of tree-like branching network microchannel heat sinks for enhanced heat transfer with nanofluidsApplied Thermal Engineering, 2024
- Numerical simulation and experimental investigation on heat transfer and hydraulic characteristics of rectangular microchannel heat sinks using high thermal conductivity diamond/copper compositesDiamond and Related Materials, 2024
- Analysis of a viscoelastic fluid flow with Cattaneo–Christov heat flux and Soret–Dufour effectsCase Studies in Thermal Engineering, 2023
- Energy, exergy, economy analysis and geometry optimization of spiral coil heat exchangersCase Studies in Thermal Engineering, 2023
- A new microchannel heat exchanger configuration using CNT-nanofluid and allowing uniform temperature on the active wallCase Studies in Thermal Engineering, 2022
- Computational study of rib shape and configuration for heat transfer and fluid flow characteristics of microchannel heat sinks with fan-shaped cavitiesApplied Thermal Engineering, 2021
- Computational analysis of hybrid nanofluid enhanced heat transfer in cross flow micro heat exchanger with rectangular wavy channelsCase Studies in Thermal Engineering, 2021
- Investigation of nanofluids heat transfer in a ribbed microchannel heat sink using single-phase and multiphase CFD modelsInternational Communications in Heat and Mass Transfer, 2015
- Influence of nanofluids on parallel flow square microchannel heat exchanger performanceInternational Communications in Heat and Mass Transfer, 2011
- Numerical simulation of heat transfer in a micro channel heat sinks using nanofluidsHeat and Mass Transfer, 2010