Rectangular Improvement Method for Plan View Pattern of Plates During the Angular Rolling Process
Open Access
Abstract
The effect of the angular rolling process on the plan view pattern of a plate was studied, and the rectangular influencing factors and improvement methods for this process were proposed in this paper. DEFORM (v11.0) finite element software was used to simulate the processes of conventional rolling and angular rolling, and the degree of rectangularity of plates under different rolling process conditions was compared. A formula to characterize the degree of rectangularity of plates was established; the closer this value is to one, the better the degree of rectangularity. Considering the actual rolling process conditions, the range of theoretically calculated rectangular rotation angles was extended to obtain the optimum rectangular rotation angle using the finite element simulation method. In the two-pass angular rolling process, the optimal rectangular angle of the second pass was 14.275° when the first pass was 15°. The optimal rectangular angle of the plate was 19.008° when the first pass’ angle was 20°. Two-pass angular rolling is different to four-pass rolling, and the simulation results showed that (1.0012) was less than (1.0015) and (1.0034) was less than (1.0055). The rectangularity degree of the four-pass process was better than the two-pass process. Angular rolling experiments were carried out, and the actual data show that the characteristic rectangular value of the rolled piece was 1.003 during the four-pass process and 1.014 during the two-pass process. This verified that separating the one-group two-pass angular rolling process from the one-group four-pass angular rolling process can improve the rectangular degree of the rolled plate, thereby increasing the yield rate. This provides a theoretical basis for industrial applications.
Keywords
All Related Versions
Funding Information
- Fundamental Research Funds for the Central Universities (N160704003, N170708020, N2107007)
This publication has 16 references indexed in Scilit:
- Research and application of the angular rolling technology for plate millAdvances in Manufacturing, 2023
- Simulation of plate rolling process using finite element methodMaterials Today: Proceedings, 2021
- Numerical Simulation, Microstructure, properties of EH40 ultra-heavy plate under gradient temperature rollingMaterials Science and Engineering: A, 2020
- Sustainable development of the steel plate hot rolling technology due to energy-power process parameters justificationE3S Web of Conferences, 2020
- Predicting model of thickness distribution and rolling force in angular rolling process based on influence function methodMechanics & Industry, 2018
- Development of the {113}〈uvw〉 texture during the annealing of a skew cold rolled non-oriented electrical steelScripta Materialia, 2016
- Analysis of the evolution behavior of voids during the hot rolling process of medium platesJournal of Materials Processing Technology, 2015
- Broadside Compensation Rolling Model for Plan View Pattern Control in Wide and Heavy Plate Rolling ProcessJournal of Iron and Steel Research International, 2014
- Derivation of Simplified Models of Plan View Pattern Control Function for Plate MillJournal of Iron and Steel Research International, 2007
- Calculation of Taper Rolling Time in Plan View Pattern Control ProcessJournal of Iron and Steel Research International, 2006