Development of Climate Indices Using Local Weather Data for Shading Design
Open Access
- 10 February 2015
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 7 (2) , 1884-1899
Abstract
The energy performance of buildings depends on how effectively the building envelope responds to climate. Architects, therefore, need to design building envelopes with the consideration of local climate characteristics in the early design stage. Simplified formulas were used that evaluate the heating and cooling energy demand of building envelopes, which were applied to a model building with envelope and climate properties according to eight climate zones. Two climate indices, P and S, were developed. P enables the comparison of the heating and cooling energy demand of building envelopes, and S is for comparing the solar heat gain during heating and cooling seasons to review the feasibility of installing shading devices. The physical properties of envelopes were set differently according to the requirements in each climate zone proposed by American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) 90.1. Using local climate data, the P and S of 24 cities over eight climate zones in the United States were derived, which can be used to evaluate the heating and cooling energy characteristics of envelopes. The indices not only enable users to understand the characteristics of the local climate conditions in a simple manner, but also to carry out quantitative assessments on whether shading devices are feasible and, if so, what type is recommended.Keywords
This publication has 16 references indexed in Scilit:
- Adapting cities to climate change: A systemic modelling approachUrban Climate, 2014
- The Energy Upgrading of Existing Buildings: Window and Shading Device Typologies for Energy Efficiency RefurbishmentSustainability, 2014
- Buildings Energy Efficiency: Interventions Analysis under a Smart Cities ApproachSustainability, 2014
- A study on the proposes of energy analysis indicator by the window elements of office buildings in KoreaEnergy and Buildings, 2014
- Impact of external shading devices on thermal and daylighting performance of offices in hot climate regionsSolar Energy, 2014
- Comparative control strategies for roller shades with respect to daylighting and energy performanceBuilding and Environment, 2013
- Comparative advantage of an exterior shading device in thermal performance for residential buildingsEnergy and Buildings, 2012
- Climate Responsive Design and the Milam ResidenceSustainability, 2011
- Assessment of the thermal and visual efficiency of solar shadesBuilding and Environment, 2011
- Environmental performance optimization of window–wall ratio for different window type in hot summer and cold winter zone in China based on life cycle assessmentEnergy and Buildings, 2010