Characteristics of Polyurethane Foam Smoke Particles Formed during Initial Fire Stages
Authors:
- Yejin HaYHYejin Ha
- Jung-Hun NohJNJung-Hun Noh
- Joonho JeonJoonho Jeon
Open Access
- 31 August 2024
- journal article
- Published by Korea Institute of Fire Science and Engineering in Fire Science and Engineering
- Vol. 38 (4) , 1-9
Abstract
When exposed to an external heat source, a solid fuel generates condensed and gaseous phases on its surface through pyrolysis. The pyrolysis products can determine ignition and fire development, as well as smoke release. Elucidating the pyrolysis process is essential for predicting complex fire phenomena such as flame propagation and spread. In this study, thermogravimetric analysis (TGA) and an optical particle counter (OPC) were used to investigate smoke particle formation based on pyrolysis. The TGA results revealed that polyurethane foam pyrolyzed in two stages and then oxidized in three stages. The OPC results confirmed that smoke particle formation depended on the presence of an ignition source at low temperatures. Additionally, methods are provided to account for the behavior of particulate matter during pyrolysis modeling.Keywords
Funding Information
- Ministry of Science and ICT (2021R1I1A305197611)
This publication has 17 references indexed in Scilit:
- An approach for the improved measurement of pyrolysis productsFire Safety Journal, 2023
- PMMA pyrolysis simulation – from micro- to real-scaleFire Safety Journal, 2023
- Applying the FDS pyrolysis model to predict heat release rate in small-scale forced ventilation tunnel experimentsFire Safety Journal, 2020
- Thermal decomposition of flexible polyurethane foams in airFire Safety Journal, 2020
- Thermal decomposition and pyrolysis of solid fuels: Objectives, challenges and modellingFire Safety Journal, 2019
- Pyrolysis model for predicting the fire behavior of flexible polyurethane foamBuilding Simulation, 2018
- Pyrolysis and combustion study of flexible polyurethane foamJournal of Analytical and Applied Pyrolysis, 2015
- Thermokinetic model of sample response in nonisothermal analysisThermochimica Acta, 2012
- Radiant Ignition of Polyurethane Foam: The Effect of Sample SizeFire Technology, 2012
- Modelling the pyrolysis of wet wood – II. Three-dimensional cone calorimeter simulationInternational Journal of Heat and Mass Transfer, 2007