Study of the shock wave effect on the deformation of the vehicle bottom using deformable energy absorbers
Authors:
- Lech StarczewskiLSLech Starczewski
- Michał GmitrzukMGMichał Gmitrzuk
- Dariusz DanielewiczDDDariusz Danielewicz
- Krzysztof SzcześniakKSKrzysztof Szcześniak
- Robert NycRNRobert Nyc
Open Access
- 28 December 2017
- journal article
- Published by Kaunas University of Technology (KTU) in Mechanics
- Vol. 23 (6) , 794-801
Abstract
The paper reports a study on the effect of a shock wave generated during the detonation of 1.5 kg TNT on the deformation of a multi-layered energy absorber. The experiments were carried out using a custom- designed testing station. The detonation of the charge was performed using a steel plate with a blind hole in accordance with the requirements of the NATO (North Atlantic Treaty Organization) AEP -55 (Allied Engineering Publication) volume 2 document. In the tests, the total and plastic deformations of the plate modelling the basic armour of the lower part of the vehicle in configurations without and with a shock wave absorbing element (energy absorber) were measured. The comb gage method reported by the US Army Developmental Test Command was used in measurements of the total deformation of the model. The study has shown that an appropriate design of the energy absorber and the use of suitable materials in its fabrication allow the total deformation to be reduced. Moreover in this article numerical simulations of the deformation phenomenon of the multi-layered energy absorbers were shown. Numerical simulations have shown high numerical model compliance compared to the experimental studies. In the studies were achieved about 99 percent numerical with the real model correlation. DOI: http://dx.doi.org/10.5755/j01.mech.23.6.14119Keywords
This publication has 6 references indexed in Scilit:
- Methodology and validation for blast and shock testing of structures using high-speed hydraulic actuatorsEngineering Structures, 2014
- Wet-sand impulse loading of metallic plates and corrugated core sandwich panelsInternational Journal of Impact Engineering, 2011
- Analysis and design of steel-concrete composite sandwich systems subjected to extreme loadsFrontiers of Architecture and Civil Engineering in China, 2011
- The resistance of metallic plates to localized impulseJournal of the Mechanics and Physics of Solids, 2008
- Deformation and fracture modes of sandwich structures subjected to underwater impulsive loadsJournal of Mechanics of Materials and Structures, 2007
- A comparative study of impulse-resistant metal sandwich platesInternational Journal of Impact Engineering, 2004