Spatially and Size Selective Synthesis of Fe-Based Nanoparticles on Ordered Mesoporous Supports as Highly Active and Stable Catalysts for Ammonia Decomposition
- 17 September 2010
- journal article
- research article
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 132 (40) , 14152-14162
Abstract
Uniform and highly dispersed γ-Fe2O3 nanoparticles with a diameter of ∼6 nm supported on CMK-5 carbons and C/SBA-15 composites were prepared via simple impregnation and thermal treatment. The nanostructures of these materials were characterized by XRD, Mössbauer spectroscopy, XPS, SEM, TEM, and nitrogen sorption. Due to the confinement effect of the mesoporous ordered matrices, γ-Fe2O3 nanoparticles were fully immobilized within the channels of the supports. Even at high Fe-loadings (up to about 12 wt %) on CMK-5 carbon no iron species were detected on the external surface of the carbon support by XPS analysis and electron microscopy. Fe2O3/CMK-5 showed the highest ammonia decomposition activity of all previously described Fe-based catalysts in this reaction. Complete ammonia decomposition was achieved at 700 °C and space velocities as high as 60 000 cm3 gcat−1 h−1. At a space velocity of 7500 cm3 gcat−1 h−1, complete ammonia conversion was maintained at 600 °C for 20 h. After the reaction, the immobilized γ-Fe2O3 nanoparticles were found to be converted to much smaller nanoparticles (γ-Fe2O3 and a small fraction of nitride), which were still embedded within the carbon matrix. The Fe2O3/CMK-5 catalyst is much more active than the benchmark NiO/Al2O3 catalyst at high space velocity, due to its highly developed mesoporosity. γ-Fe2O3 nanoparticles supported on carbon-silica composites are structurally much more stable over extended periods of time but less active than those supported on carbon. TEM observation reveals that iron-based nanoparticles penetrate through the carbon layer and then are anchored on the silica walls, thus preventing them from moving and sintering. In this way, the stability of the carbon-silica catalyst is improved. Comparison with the silica supported iron oxide catalyst reveals that the presence of a thin layer of carbon is essential for increased catalytic activity.Keywords
This publication has 44 references indexed in Scilit:
- Nanoporous oxidic solids: the confluence of heterogeneous and homogeneous catalysisPhysical Chemistry Chemical Physics, 2009
- Thermally stable Pt/mesoporous silica core–shell nanocatalysts for high-temperature reactionsNature Materials, 2008
- Effect of Confinement in Carbon Nanotubes on the Activity of Fischer−Tropsch Iron CatalystJournal of the American Chemical Society, 2008
- Systematic Enumeration of Microporous Solids: Towards Designer CatalystsAngewandte Chemie International Edition, 2007
- NH3 Decomposition Kinetics on Supported Ru Clusters: Morphology and Particle Size EffectCatalysis Letters, 2007
- Enhanced ethanol production inside carbon-nanotube reactors containing catalytic particlesNature Materials, 2007
- Decomposition of ammonia over a catalyst consisting of ruthenium metal and cerium oxides supported on Y-form zeoliteJournal of Molecular Catalysis A: Chemical, 2000
- XPS Investigation of X-Ray-Induced Reduction of Metal IonsApplied Spectroscopy, 2000
- The multiple roles for catalysis in the production of H2Applied Catalysis A: General, 1999
- Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom PoresScience, 1998