Study of the Composite Piezoelectric Coatings Used in Sensing Elements
- 12 December 2022
- journal article
- research article
- Published by Pleiades Publishing Ltd in Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques
- Vol. 16 (6) , 1322-1326
Abstract
The design of the measuring circuit of a system of structural health monitoring of objects based on a piezosensitive matrix is presented. It is shown that a promising trend in the design of matrices of bulk piezosensitive materials and piezocoatings is the possibility of using phosphate binders. The proposed structure of a piezocoating based on a phosphate binder consists of five alternately formed layers. The piezoelectric layer is formed at a temperature from 10 to 30°C with subsequent polarization for 3 h at an electrical voltage of no more than 300 V and a temperature of no more than 120°C. The dielectric and piezoelectric characteristics of the piezocomposite samples formed from a piezoelectric material similar to PZT-19 and a phosphate binder in the mass ratio of 10 : 1 are presented. Polarized samples are subjected to artificial aging by exposure at a temperature of 80°C for 10 days, after which piezosensitivities d33 and d31 and relative dielectric permittivity \(K_{{33}}^{T}\) are measured. In addition, a technique is developed to estimate the critical number of cycles of switching the polarity of the electric field applied to a thin-film sample made of a ceramic dielectric. The technique is based on approximation of the dependence of the residual polarization on the number of cycles of switching the polarity of the electric field applied to the sample. This makes it possible to predict the deviation of the dielectric properties of the sample material from the required values. The results of the full-scale experiment confirmed the possibility of creating a piezoelectric material based on a phosphate binder for the fabrication of sensitive elements of the structural health monitoring systems.
Keywords
This publication has 14 references indexed in Scilit:
- Repolarization of Ferroelectric Superlattices BaZrO3/BaTiO3Scientific Reports, 2019
- Intelligent System for Active Dielectrics Parameters ResearchProcedia Computer Science, 2018
- Investigation of MEMS Piezoelectric Transformer with PVDF Thin LayerMaterials Science Forum, 2016
- Dielectric and piezoelectric properties of PVDF/PZT composites: A reviewPolymer Engineering & Science, 2015
- Controlling the temporal instability of the dielectric parameters of ferroelectricsSemiconductors, 2013
- Fatigue of lead titanate and lead zirconate titanate thin films with various values of coercive and internal bias fieldsBulletin of the Russian Academy of Sciences: Physics, 2010
- Ageing and fatigue of lead titanate and lead zirconate titanate thin ferroelectric filmsSolid State Sciences, 2010
- Investigation of dielectric aging in layered ferroelectricsPhysics of the Solid State, 2009
- A piezopaint-based sensor for monitoring structure dynamicsSmart Materials and Structures, 2007
- Influence of polarization on properties of 0–3 cement-based PZT compositesCement and Concrete Composites, 2005