Crack Growth under Isothermal and Thermomechanical Fatigue and Dominant Failure Mechanisms in Heat-Resistant Alloy
- 26 December 2025
- journal article
- research article
- Published by Pleiades Publishing Ltd in Physical Mesomechanics
- Vol. 28 (6) , 760-775
Abstract
The paper presents an analysis of crack growth rates and an assessment of fracture mechanisms based on the experimental data on isothermal and nonisothermal fatigue. Test results were obtained in the temperature range of 400–650°C under conditions of harmonic fatigue, creep–fatigue interaction, in-phase and out-of-phase thermomechanical cyclic loading. The object of study was heat-resistant nickel-based alloy EI698. After testing, the specimens underwent detailed fractographic analysis using scanning electron microscopy. It was found that the fatigue fracture diagrams were in the following order in terms of crack growth acceleration: isothermal creep–fatigue interaction, nonisothermal in-phase thermomechanical fatigue, isothermal pure fatigue, and nonisothermal out-of-phase thermomechanical fatigue. The crack growth rate curves were arranged according to the dominant intergranular and transgranular fracture mechanisms, and features of transition from one to another were identified.Keywords
This publication has 24 references indexed in Scilit:
- 3D XFEM investigation of the plasticity effect on fatigue propagation under thermo-mechanical loadingInternational Journal of Fracture, 2021
- Thermomechanical fatigue crack growth in a single crystal nickel base superalloyInternational Journal of Fatigue, 2019
- Development of test facilities for thermo-mechanical fatigue testingInternational Journal of Fatigue, 2019
- Mechanism of high‐temperature oxidation effects in fatigue crack propagation and fracture mode for FGH97 superalloyRare Metals, 2018
- Characterization of fatigue crack growth, damage mechanisms and damage evolution of the nickel-based superalloys MAR-M247 CC (HIP) and CM-247 LC under thermomechanical fatigue loading using in situ optical microscopyInternational Journal of Fatigue, 2017
- Relation between crack growth behaviour and crack front morphology under hold-time conditions in DA Inconel 718International Journal of Fatigue, 2017
- Microstructurally sensitive crack nucleation around inclusions in powder metallurgy nickel-based superalloysActa Materialia, 2016
- Failure of metals II: FatigueActa Materialia, 2016
- Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloyActa Materialia, 2015
- Fatigue crack initiation and propagation in several nickel-base superalloys at 650°CInternational Journal of Fatigue, 1983