The atomic layer deposition (ALD) synthesis of copper-tin sulfide thin films using low-cost precursors
Authors:
- Marcin WitkowskiMWMarcin Witkowski
- Zbigniew StarowiczZSZbigniew Starowicz
- Adam ZiębaAZAdam Zięba
- Bogusława Adamczyk-CieślakBABogusława Adamczyk-Cieślak
- Robert Piotr SochaRobert Piotr Socha
- Oliwia SzawcowOSOliwia Szawcow
- Grzegorz KołodziejGKGrzegorz Kołodziej
- Maciej HarasMHMaciej Haras
- Jakub OstapkoJOJakub Ostapko
- 7 October 2022
- journal article
- research article
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (50) , 505603
Abstract
In this work we demonstrated the process of co-deposition of copper-tin sulfide species by the atomic layer deposition (ALD) technique using all-low-cost precursors. For the deposition of tin species, the tin(IV) chloride SnCl 4 was used successfully for the first time in the ALD process. Moreover, we showed that the successful deposition of the tin sulfide component was conditioned by the pre-deposition of CuS x layer. The co-deposition of copper and tin sulfides components at 150 °C resulted in the in-process formation of the film containing Cu 2 SnS 3 , Cu 3 SnS 4 and π -SnS phases. The process involving only tin precursor and H 2 S did not produce the SnS x species. The spectroscopic characteristic of the obtained materials were confronted with the literature survey, allowing us to discuss the methodology of the determination of ternary and quaternary sulfides purity by Raman spectroscopy. Moreover, the material characterisation with respect to the morphology (SEM), phase composition (XRD), surface chemical states (XPS), optical properties (UV–vis-NIR spectroscopy) and electric (Hall measurements) properties were provided. Finally, the obtained material was used for the formation of the p–n junction revealing the rectifying I – V characteristics.Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (TECHMATSTRATEG2/409122/3/NCBR/2019)
This publication has 131 references indexed in Scilit:
- Formation of Cu2SnS3 thin film by the heat treatment of electrodeposited SnS–Cu layersJournal of Materials Science: Materials in Electronics, 2013
- Atomic Layer Deposition of the Quaternary Chalcogenide Cu2ZnSnS4Chemistry of Materials, 2012
- A study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursorsJournal of Physics D: Applied Physics, 2010
- Large-area aligned branched Cu2S nanostructure arrays: room-temperature synthesis and growth mechanismNanotechnology, 2010
- CuxSnSx+1 (x = 2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputteringphysica status solidi (c), 2010
- Raman investigation of chalcopyrite oxidationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- A Raman spectroelectrochemical investigation of chemical bath deposited CuxS thin films and their modificationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2007
- Comparison of CuxS Films Grown by Atomic Layer Deposition and Chemical Vapor DepositionChemistry of Materials, 2005
- Growth of conductive copper sulfide thin films by atomic layer depositionJournal of Materials Chemistry, 2002
- X-ray photoelectron and Auger spectroscopic studies of Cu2S and CuSJournal of Materials Science Letters, 1986