Jakub Ostapko
Jakub Ostapko has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Jacek Waluk
Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, Warsaw, Poland, 01-224
6 shared publications - Aleksander Gorski
Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
3 shared publications - Mateusz Brzezinski
Max Planck Institute for Polymer Research, Ackermannweg 10, Mainz, Germany
3 shared publications Michał Kijak
Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
3 shared publications- Adam Zięba
Research and Development Center of Technology for Industry, Waryńskiego 3A, 00-645 Warsaw, Poland
2 shared publications - Agata Tyszka-Gumkowska
Centre of Excellence ENSEMBLE3 Sp. z o.o. Warsaw Poland
2 shared publications
Latest Publications
- Open Access
- 25 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (14)
Aminal‐linked Covalent Organic Frameworks for Light Energy Upconversion
The conversion of two low‐energy photons into a single higher‐energy photon at low irradiance is highly desirable for bioimaging and solar energy harvesting. Yet translating established solution‐phase triplet–triplet annihilation upconversion (TTA‐UC) systems into robust solid‐state platforms remains a challenge. Here, we report the first covalent organic frameworks (COFs) capable of sensitized TTA‐UC. Two aminal‐linked frameworks integrating anthracene chromophores, Ant‐COF‐H and Ant‐COF‐OH , were synthesized and structurally characterized, revealing high crystallinity and strong photoluminescence ( Φ F ≈ 40%). When sensitized with a palladium porphyrin complex, both COFs display upconverted emission with quantum yields up to 1.8%, surpassing the performance of the conventional all‐in‐solution reference system. Notably, the onset of saturation occurs at excitation power densities as low as 100 mW cm −2 . Time‐resolved emission spectroscopy reveals fast energy‐transfer consistent with intra‐framework triplet migration rather than diffusion. Finally, we correlate framework structural features with energy‐loss pathways, providing design guidelines for further improvement. This work establishes a foundation for practical, low‐power light management in crystalline polymers by demonstrating that aminal‐linked COFs can be engineered to support efficient energy transfer and function as solid‐state upconverters.
- 25 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (14)
Open AccessAminal‐linked Covalent Organic Frameworks for Light Energy Upconversion
The conversion of two low‐energy photons into a single higher‐energy photon at low irradiance is highly desirable for bioimaging and solar energy harvesting. Yet translating established solution‐phase triplet–triplet annihilation upconversion (TTA‐UC) systems into robust solid‐state platforms remains a challenge. Here, we report the first covalent organic frameworks (COFs) capable of sensitized TTA‐UC. Two aminal‐linked frameworks integrating anthracene chromophores, Ant‐COF‐H and Ant‐COF‐OH , were synthesized and structurally characterized, revealing high crystallinity and strong photoluminescence ( Φ F ≈ 40%). When sensitized with a palladium porphyrin complex, both COFs display upconverted emission with quantum yields up to 1.8%, surpassing the performance of the conventional all‐in‐solution reference system. Notably, the onset of saturation occurs at excitation power densities as low as 100 mW cm −2 . Time‐resolved emission spectroscopy reveals fast energy‐transfer consistent with intra‐framework triplet migration rather than diffusion. Finally, we correlate framework structural features with energy‐loss pathways, providing design guidelines for further improvement. This work establishes a foundation for practical, low‐power light management in crystalline polymers by demonstrating that aminal‐linked COFs can be engineered to support efficient energy transfer and function as solid‐state upconverters.
- Open Access
- 23 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (14) , e22521
Aminal‐linked Covalent Organic Frameworks for Light Energy Upconversion
The conversion of two low‐energy photons into a single higher‐energy photon at low irradiance is highly desirable for bioimaging and solar energy harvesting. Yet translating established solution‐phase triplet–triplet annihilation upconversion (TTA‐UC) systems into robust solid‐state platforms remains a challenge. Here, we report the first covalent organic frameworks (COFs) capable of sensitized TTA‐UC. Two aminal‐linked frameworks integrating anthracene chromophores, Ant‐COF‐H and Ant‐COF‐OH , were synthesized and structurally characterized, revealing high crystallinity and strong photoluminescence ( Φ F ≈ 40%). When sensitized with a palladium porphyrin complex, both COFs display upconverted emission with quantum yields up to 1.8%, surpassing the performance of the conventional all‐in‐solution reference system. Notably, the onset of saturation occurs at excitation power densities as low as 100 mW cm −2 . Time‐resolved emission spectroscopy reveals fast energy‐transfer consistent with intra‐framework triplet migration rather than diffusion. Finally, we correlate framework structural features with energy‐loss pathways, providing design guidelines for further improvement. This work establishes a foundation for practical, low‐power light management in crystalline polymers by demonstrating that aminal‐linked COFs can be engineered to support efficient energy transfer and function as solid‐state upconverters.
- 23 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (14) , e22521
Open AccessAminal‐linked Covalent Organic Frameworks for Light Energy Upconversion
The conversion of two low‐energy photons into a single higher‐energy photon at low irradiance is highly desirable for bioimaging and solar energy harvesting. Yet translating established solution‐phase triplet–triplet annihilation upconversion (TTA‐UC) systems into robust solid‐state platforms remains a challenge. Here, we report the first covalent organic frameworks (COFs) capable of sensitized TTA‐UC. Two aminal‐linked frameworks integrating anthracene chromophores, Ant‐COF‐H and Ant‐COF‐OH , were synthesized and structurally characterized, revealing high crystallinity and strong photoluminescence ( Φ F ≈ 40%). When sensitized with a palladium porphyrin complex, both COFs display upconverted emission with quantum yields up to 1.8%, surpassing the performance of the conventional all‐in‐solution reference system. Notably, the onset of saturation occurs at excitation power densities as low as 100 mW cm −2 . Time‐resolved emission spectroscopy reveals fast energy‐transfer consistent with intra‐framework triplet migration rather than diffusion. Finally, we correlate framework structural features with energy‐loss pathways, providing design guidelines for further improvement. This work establishes a foundation for practical, low‐power light management in crystalline polymers by demonstrating that aminal‐linked COFs can be engineered to support efficient energy transfer and function as solid‐state upconverters.
- Open Access
- 1 October 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 8048-8058
Reductive Transformation of Imine Covalent Organic Frameworks into Emissive Polymers: Insights into Emission Quenching
Although imine-linked covalent organic frameworks (COFs) are readily synthesized, their lack of intrinsic emission constrains their potential in optoelectronic applications. Moreover, the underlying mechanisms governing excited-state energy dissipation remain poorly understood. To overcome these limitations, we present a straightforward strategy to transform nonemissive, anthracene-based imine-COFs (im-COF) into highly emissive amine-based covalent organic polymers (am-COP) through NaBH3CN/benzoic acid reduction, achieving solid-state emission quantum yields of up to 30%. To clarify the excited-state energy dissipation mechanisms in COFs and COPs, we synthesized molecular reference compounds featuring either imine or amine functionalities. Photophysical studies, supported by density functional theory (DFT) calculations, reveal that the excited states of both amines and imines exhibit weak charge transfer (CT) properties. Furthermore, a comparative analysis of the photophysical behavior of molecular references, im-COFs, and am-COPs demonstrates that the polymer emission arising from charge-transfer processes is modulated by the polymer's intrinsic polarity. These findings provide fundamental insights into the photophysical behavior of COFs, thus paving the way for the development of emissive porous materials with promising advanced applications.
- 1 October 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 8048-8058
Open AccessReductive Transformation of Imine Covalent Organic Frameworks into Emissive Polymers: Insights into Emission Quenching
Although imine-linked covalent organic frameworks (COFs) are readily synthesized, their lack of intrinsic emission constrains their potential in optoelectronic applications. Moreover, the underlying mechanisms governing excited-state energy dissipation remain poorly understood. To overcome these limitations, we present a straightforward strategy to transform nonemissive, anthracene-based imine-COFs (im-COF) into highly emissive amine-based covalent organic polymers (am-COP) through NaBH3CN/benzoic acid reduction, achieving solid-state emission quantum yields of up to 30%. To clarify the excited-state energy dissipation mechanisms in COFs and COPs, we synthesized molecular reference compounds featuring either imine or amine functionalities. Photophysical studies, supported by density functional theory (DFT) calculations, reveal that the excited states of both amines and imines exhibit weak charge transfer (CT) properties. Furthermore, a comparative analysis of the photophysical behavior of molecular references, im-COFs, and am-COPs demonstrates that the polymer emission arising from charge-transfer processes is modulated by the polymer's intrinsic polarity. These findings provide fundamental insights into the photophysical behavior of COFs, thus paving the way for the development of emissive porous materials with promising advanced applications.
- 11 April 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (37) , 5547-5550
Tandem Pd-catalyzed annulation/coupling of acetylenic enamines with aryl triflates
Application of aryl triflates and terminal acetylenic enamines as surrogates of unactivated ketones enables an unprecedented Pd-catalyzed 5- exo-dig cyclization/cross coupling sequence.
- 11 April 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (37) , 5547-5550
Tandem Pd-catalyzed annulation/coupling of acetylenic enamines with aryl triflates
Application of aryl triflates and terminal acetylenic enamines as surrogates of unactivated ketones enables an unprecedented Pd-catalyzed 5- exo-dig cyclization/cross coupling sequence.
- 4 March 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 292, 116405
Synthesis and characterization of Al-doped ZnO and Al/F co-doped ZnO thin films prepared by atomic layer deposition
- 4 March 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 292, 116405
Synthesis and characterization of Al-doped ZnO and Al/F co-doped ZnO thin films prepared by atomic layer deposition
- Open Access
- 19 December 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (2) , 1096-1104
Tautomerization of single asymmetric oxahemiporphycene molecules on Cu(111)
We have studied 22-oxahemiporphycene molecules by a combination of scanning tunneling microscopy at low temperatures and density functional theory calculations.
- 19 December 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (2) , 1096-1104
Open AccessTautomerization of single asymmetric oxahemiporphycene molecules on Cu(111)
We have studied 22-oxahemiporphycene molecules by a combination of scanning tunneling microscopy at low temperatures and density functional theory calculations.
- 7 October 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (50) , 505603
The atomic layer deposition (ALD) synthesis of copper-tin sulfide thin films using low-cost precursors
In this work we demonstrated the process of co-deposition of copper-tin sulfide species by the atomic layer deposition (ALD) technique using all-low-cost precursors. For the deposition of tin species, the tin(IV) chloride SnCl 4 was used successfully for the first time in the ALD process. Moreover, we showed that the successful deposition of the tin sulfide component was conditioned by the pre-deposition of CuS x layer. The co-deposition of copper and tin sulfides components at 150 °C resulted in the in-process formation of the film containing Cu 2 SnS 3 , Cu 3 SnS 4 and π -SnS phases. The process involving only tin precursor and H 2 S did not produce the SnS x species. The spectroscopic characteristic of the obtained materials were confronted with the literature survey, allowing us to discuss the methodology of the determination of ternary and quaternary sulfides purity by Raman spectroscopy. Moreover, the material characterisation with respect to the morphology (SEM), phase composition (XRD), surface chemical states (XPS), optical properties (UV–vis-NIR spectroscopy) and electric (Hall measurements) properties were provided. Finally, the obtained material was used for the formation of the p–n junction revealing the rectifying I – V characteristics.
- 7 October 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (50) , 505603
The atomic layer deposition (ALD) synthesis of copper-tin sulfide thin films using low-cost precursors
In this work we demonstrated the process of co-deposition of copper-tin sulfide species by the atomic layer deposition (ALD) technique using all-low-cost precursors. For the deposition of tin species, the tin(IV) chloride SnCl 4 was used successfully for the first time in the ALD process. Moreover, we showed that the successful deposition of the tin sulfide component was conditioned by the pre-deposition of CuS x layer. The co-deposition of copper and tin sulfides components at 150 °C resulted in the in-process formation of the film containing Cu 2 SnS 3 , Cu 3 SnS 4 and π -SnS phases. The process involving only tin precursor and H 2 S did not produce the SnS x species. The spectroscopic characteristic of the obtained materials were confronted with the literature survey, allowing us to discuss the methodology of the determination of ternary and quaternary sulfides purity by Raman spectroscopy. Moreover, the material characterisation with respect to the morphology (SEM), phase composition (XRD), surface chemical states (XPS), optical properties (UV–vis-NIR spectroscopy) and electric (Hall measurements) properties were provided. Finally, the obtained material was used for the formation of the p–n junction revealing the rectifying I – V characteristics.
- Open Access
Printability of Collecting Electrode Using AJP for New Construction of Photovoltaic Device
In 2018, the European Parliament and Council laid down a directive about the promotion of the use of energy from renewable sources connected with the Paris Agreement, which sets a global ambition on climate change mitigation through deep and fast cuts in greenhouse gas emissions. Since then, the science world has been even more focused on the development of green technologies such as wind farms, waterpower stations, and photovoltaics as the European Union is preparing to shift to renewables-based energy systems. Each green power technology has its own problems and limitations. Nevertheless, for environmental protection, new power technologies have to be implemented in the near future as primary power sources. Described in this article is the application of aerosol jet printing in manufacture of photovoltaic cells, moving the technology boundaries further toward highly efficient, cost-effective, green power production. The research focused on utilizing aerosol jet printing technology to create finger-shaped collecting electrodes on a newly constructed, non-silicon photovoltaic cell, based on metal oxides. Three commercial nanosilver inks were investigated considering their printing parameters, printability on the specified substrate (AZO-coated glass, AZO-coated copper plate), resistivity of the cured composite, quality of the overprints, and application in photovoltaics. As a result, we obtained finger-shaped collecting electrodes with a resistivity of 3.5 µΩ∙cm and 8 µm width, which compares well with the literature.
Open AccessPrintability of Collecting Electrode Using AJP for New Construction of Photovoltaic Device
In 2018, the European Parliament and Council laid down a directive about the promotion of the use of energy from renewable sources connected with the Paris Agreement, which sets a global ambition on climate change mitigation through deep and fast cuts in greenhouse gas emissions. Since then, the science world has been even more focused on the development of green technologies such as wind farms, waterpower stations, and photovoltaics as the European Union is preparing to shift to renewables-based energy systems. Each green power technology has its own problems and limitations. Nevertheless, for environmental protection, new power technologies have to be implemented in the near future as primary power sources. Described in this article is the application of aerosol jet printing in manufacture of photovoltaic cells, moving the technology boundaries further toward highly efficient, cost-effective, green power production. The research focused on utilizing aerosol jet printing technology to create finger-shaped collecting electrodes on a newly constructed, non-silicon photovoltaic cell, based on metal oxides. Three commercial nanosilver inks were investigated considering their printing parameters, printability on the specified substrate (AZO-coated glass, AZO-coated copper plate), resistivity of the cured composite, quality of the overprints, and application in photovoltaics. As a result, we obtained finger-shaped collecting electrodes with a resistivity of 3.5 µΩ∙cm and 8 µm width, which compares well with the literature.
- Open Access
- 4 August 2021
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 9 (4) , 045003
Spectral and photophysical modifications of porphyrins attached to core–shell nanoparticles. Theory and experiment
Plasmonic nanostructures, of which gold nanoparticles are the most elementary example, owe their unique properties to localized surface plasmons (LSP), the modes of free electron oscillation. LSP alter significantly electromagnetic field in the nanostructure neighborhood (i.e., near-field), which can modify the electric dipole transition rates in organic emitters. This study aims at investigating the influence of Au@SiO2 core–shell nanoparticles on the photophysics of porphyrins covalently attached to the nanoparticles surface. Guided by theoretical predictions, three sets of gold nanoparticles of different sizes were coated with a silica layer of similar thickness. The outer silica surface was functionalized with either free-base meso-tetraphenylporphyrin or its zinc complex. Absorption and emission bands of porphyrin overlap in energy with a gold nanoparticle LSP resonance that provides the field enhancement. Silica separates the emitters from the gold surface, while the gold core size tunes the energy of the LSP resonance. The signatures of weak-coupling regime have been observed. Apart from modified emission profiles and shortened S1 lifetimes, Q band part intensity of the excitation spectra significantly increased with respect to the Soret band. The results were explained using classical transfer matrix simulations and electronic states kinetics, taking into account the photophysical properties of each chromophore. The calculations could reasonably well predict and explain the experimental outcomes. The discrepancies between the two were discussed.
- 4 August 2021
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 9 (4) , 045003
Open AccessSpectral and photophysical modifications of porphyrins attached to core–shell nanoparticles. Theory and experiment
Plasmonic nanostructures, of which gold nanoparticles are the most elementary example, owe their unique properties to localized surface plasmons (LSP), the modes of free electron oscillation. LSP alter significantly electromagnetic field in the nanostructure neighborhood (i.e., near-field), which can modify the electric dipole transition rates in organic emitters. This study aims at investigating the influence of Au@SiO2 core–shell nanoparticles on the photophysics of porphyrins covalently attached to the nanoparticles surface. Guided by theoretical predictions, three sets of gold nanoparticles of different sizes were coated with a silica layer of similar thickness. The outer silica surface was functionalized with either free-base meso-tetraphenylporphyrin or its zinc complex. Absorption and emission bands of porphyrin overlap in energy with a gold nanoparticle LSP resonance that provides the field enhancement. Silica separates the emitters from the gold surface, while the gold core size tunes the energy of the LSP resonance. The signatures of weak-coupling regime have been observed. Apart from modified emission profiles and shortened S1 lifetimes, Q band part intensity of the excitation spectra significantly increased with respect to the Soret band. The results were explained using classical transfer matrix simulations and electronic states kinetics, taking into account the photophysical properties of each chromophore. The calculations could reasonably well predict and explain the experimental outcomes. The discrepancies between the two were discussed.
- Open Access
- 10 October 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (41) , 26591-26596
Unusual effects in single molecule tautomerization: hemiporphycene
Parent hemiporphycene, a recently obtained constitutional isomer of porphyrin, exists in room temperature solutions and polymer matrices in the form of two trans tautomers interconverting via double hydrogen transfer. Using confocal fluorescence microscopy, it was possible to monitor tautomerization in single hemiporphycene molecules embedded in a PMMA film by monitoring the spectral and temporal evolution of their fluorescence spectra. The emission spectra of the two tautomeric forms are similar to those obtained from ensemble studies. However, the analysis of temporal spectral evolution reveals effects not detected in the bulk. For some single molecules, a large decrease of tautomerization rate was observed. This is interpreted as an indication of multidimensional character of the tautomerization coordinate and coupling of the reaction with the polymer relaxation processes. In addition, fluorescence lifetimes obtained for single molecules are significantly shorter than those measured for the bulk. It is proposed that the shortening is caused by environment-induced distortion of the molecule, which enhances the S0 ← S1 internal conversion rate by lowering the barrier to excited state single hydrogen transfer. This effect seems to reflect the specific morphology of thin (30 nm) polymer samples, because it is not observed in ensemble studies carried out using thick (tens of micrometers or more) PMMA films.
- 10 October 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (41) , 26591-26596
Open AccessUnusual effects in single molecule tautomerization: hemiporphycene
Parent hemiporphycene, a recently obtained constitutional isomer of porphyrin, exists in room temperature solutions and polymer matrices in the form of two trans tautomers interconverting via double hydrogen transfer. Using confocal fluorescence microscopy, it was possible to monitor tautomerization in single hemiporphycene molecules embedded in a PMMA film by monitoring the spectral and temporal evolution of their fluorescence spectra. The emission spectra of the two tautomeric forms are similar to those obtained from ensemble studies. However, the analysis of temporal spectral evolution reveals effects not detected in the bulk. For some single molecules, a large decrease of tautomerization rate was observed. This is interpreted as an indication of multidimensional character of the tautomerization coordinate and coupling of the reaction with the polymer relaxation processes. In addition, fluorescence lifetimes obtained for single molecules are significantly shorter than those measured for the bulk. It is proposed that the shortening is caused by environment-induced distortion of the molecule, which enhances the S0 ← S1 internal conversion rate by lowering the barrier to excited state single hydrogen transfer. This effect seems to reflect the specific morphology of thin (30 nm) polymer samples, because it is not observed in ensemble studies carried out using thick (tens of micrometers or more) PMMA films.