A study of the mechanical, thermal and rheological properties of sisal fiber-reinforced polylactic acid bio-composites with tributyl 2-acetylcitrate as a plasticizer
- 26 February 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 37 (11) , 3516-3539
Abstract
In this study, bio-composites were developed using polylactic acid (PLA) as the matrix and sisal fibers (SFs) derived from agave sisalana leaves as the reinforcement. The bio-composites were prepared through injection molding with the addition of tributyl 2-acetylcitrate (ATBC) plasticizer. The mechanical, thermal, and rheological properties of these bio-composites were investigated to understand the effects of fiber and plasticizer contents. The results showed that the addition of SFs improved the tensile and flexural moduli of the bio-composites but led to a decrease in tensile strength compared to neat PLA. The flexural strength initially decreased with low fiber content but recovered to the level of neat PLA as the fiber content increased. The impact strength increased with the incorporation of SFs and ATBC. However, the presence of ATBC had a negative impact on the tensile and flexural properties of the bio-composites. The thermal conductivity of the materials was influenced by the fiber content and processing temperature, increasing with SFs inclusion but decreasing with temperature. Differential scanning calorimetry analysis revealed increased crystallinity of PLA with the presence of SFs and ATBC. The specific heat capacity increased with ATBC but decreased with increasing SFs. Dynamic mechanical property testing showed variations in storage and loss moduli of the bio-composites at different temperatures. The storage modulus increased with higher fiber content and abruptly dropped around glass transition temperature. Rheological characterization demonstrated effective interactions between the fibers and matrix with good fiber dispersion, resulting in uniform shear viscosity versus shear rate for different capillary dimensions. The shear viscosity of the SFs/PLA mixture increased with increasing fiber content but decreased with the addition of plasticizer. Furthermore, the compounding and molding processes had a notable impact on the microstructure of the fibers, specifically resulting in fiber breakage and fiber separation during processing.Keywords
Funding Information
- Ministry of Education
- KU Leuven
This publication has 52 references indexed in Scilit:
- Study on Effects of Process Parameters on Mechanical Behaviors of Injection Molded Glass Fiber Reinforced Polypropylene Matrix Composite2021
- Production of Green Star/Linear PLA Blends by Extrusion and Injection Molding: Tailoring Rheological and Mechanical Performances of Conventional PLAMacromolecular Materials and Engineering, 2021
- Study on properties of polylactic acid/lemongrass fiber biocomposites prepared by fused deposition modelingPolymer Composites, 2020
- Thermal characterization and lifetime prediction of the PHBV/nanocellulose biocomposites using different kinetic approachesCellulose, 2020
- Investigation of long-term ageing effect on the thermal properties of chicken feather fibre/poly(lactic acid) biocompositesJournal of Polymer Research, 2020
- Mechanical and thermal characterization of sisal fiber reinforced polylactic acid compositesPolymers for Advanced Technologies, 2018
- The combined effect of plasticizers and graphene on properties of poly(lactic acid)Journal of Applied Polymer Science, 2018
- Effect of temperature, crystallinity and molecular chain orientation on the thermal conductivity of polymers: a case study of PLLAJournal of Materials Science, 2018
- PLA composites: From production to propertiesAdvanced Drug Delivery Reviews, 2016
- Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactionsColloid and Polymer Science, 1973