By Visualizing the Deformation with Mechanoluminescent Particles, Additive Manufacturing Offers a Practical Alternative to Stress and Strain Simulation
Open Access
Abstract
The use of stress–strain analysis in structural design or mechanical components is critical for avoiding or investigating structural failures. In the case of complicated designs, mathematical full-field stress modeling produces imprecise predictions. Experimental analysis can be used as a replacement for mathematical modeling, but with the use of currently available strain gauges, it is cumbersome and impossible in the case of moving parts. Mechanoluminescent materials transform mechanical energy into visible light and can be used as a replacement for strain gauges to monitor strain/stress. Three-dimensional printing technology has made major advances in terms of additive manufacturing. In this article, we describe a method to produce an ML 3D print. The fabricated samples are precise and versatile and satisfy the need for easy and non-destructible spatial stress analysis. A 3D printed photopolymer sample with SrAl2O4: Eu, Dy particle addition only to the final layers was tested, and the number of layers was optimized. It was determined that the optimal number of layers for easy detection is in the range of 10 to 20 layers. It opens the possibility for the real-time evaluation of complex uneven forces on complex parts, thus having a good potential for commercialization.Keywords
Funding Information
- European Regional Development Fund (1.1.1.1/20/A/138, No.739508)
- European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 (1.1.1.1/20/A/138, No.739508)
This publication has 30 references indexed in Scilit:
- 3D Printed Photoresponsive Devices Based on Shape Memory CompositesAdvanced Materials, 2017
- Desolvation Induced Origami of Photocurable Polymers by Digit Light ProcessingMacromolecular Rapid Communications, 2016
- Quantitative full-field strain measurements by SAOED (SrAl2O4:Eu2+,Dy3+) mechanoluminescent materialsSmart Materials and Structures, 2016
- Sheet sensor using SrAl2O4:Eu mechanoluminescent material for visualizing inner crack of high-pressure hydrogen vesselInternational Journal of Hydrogen Energy, 2016
- 3D Printing of Shape Memory Polymers for Flexible Electronic DevicesAdvanced Materials, 2015
- Persistent phosphor SrAl_2O_4:Eu,Dy in outdoor conditions: saved by the trap distributionOptics Express, 2015
- Visualization of active crack on bridge in use by mechanoluminescent sensor2012
- Mechanoluminescent SrAl2O4:Eu,Dy phosphor for use in visualization of quasidynamic crack propagationApplied Physics Letters, 2007
- Stress-induced mechanoluminescence in SrAl2O4:Eu2+,Dy3+Optical Materials, 2006
- Dependence of mechanoluminescence in rochelle-salt crystals on the charge-produced during their fractureJournal of Physics and Chemistry of Solids, 1978