Development and Optimization of a Laboratory-Scale Bubble Column Bioreactor for Bioethanol Fermentation: A Computational Approach
Open Access
- 28 February 2026
- journal article
- Published by BCREC Publishing Group in Journal of Chemical Engineering Research Progress
- Vol. 3 (1) , 136-158
Abstract
This study presents the design and optimization of a laboratory-scale bubble column bioreactor (BCB) for bioethanol fermentation. Python-based simulations in Google Colab were employed to analyze mass transfer dynamics, hydrodynamic behavior, and reactor scale-up strategies under varying aeration rates. Although ethanol production is an anaerobic process, oxygen transfer analysis was conducted to characterize reactor performance and establish oxygen-limited conditions suitable for Saccharomyces cerevisiae fermentation, incorporating mass transfer modeling, reaction kinetics, process control, and sparger design to enhance fermentation efficiency. To further enhance fermentation efficiency, Response Surface Methodology (RSM) was applied following a two-stage optimization approach. A working volume of 500 mL was defined using fermentation kinetics, including an oxygen uptake rate of 1.1 g O₂/g cells, biomass yield of 0.5 g/g glucose, and kLa of 50 h⁻¹. A perforated plate sparger with six 1.2 mm orifices achieved a gas velocity of 90.3 m/s and 2.68 mm bubble size. Aeration was dynamically controlled to maintain 0.002 g/L dissolved oxygen, while pH was regulated at 5.0–5.5 using NaOH dosing. These conditions yielded 44.3% ethanol. A full factorial design identified Time, Air Flow Rate, Cell Loading, and Bead Mass as significant factors. RSM with Central Composite Design confirmed a significant quadratic model (F = 14.14, p < 0.0001; R² = 0.9601, Adjusted R² = 0.9201). Cell Loading (F = 48.48) and Bead Mass (F = 26.53) had the strongest effects. Optimal conditions yielded 47.9% ethanol at 52.70 h, 1.55 L/min air, 1.51 g/L cells, and 47.20 g beads, with 0.84% prediction error. Copyright © 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).Keywords
Funding Information
- Petronas Malaysia (UIC240814)
This publication has 78 references indexed in Scilit:
- Nano-enhanced biocarriers: ferric oxide-modified chitosan and calcium alginate beads for improved fermentation efficiency and reusability in a bubble column bioreactorBiotechnology Letters, 2025
- Real Case Study of 600 m3 Bubble Column Fermentations: Spatially Resolved Simulations Unveil Optimization Potentials for l‐Phenylalanine Production With Escherichia coliBiotechnology and Bioengineering, 2024
- Immobilization: the promising technique to protect and increase the efficiency of microorganisms to remove contaminantsJournal of Chemical Technology & Biotechnology, 2024
- Bubble column and airlift bioreactor systems for animal cell culture applicationsAsia-Pacific Journal of Chemical Engineering, 2022
- Biorefinery Platform for Spathaspora passalidarum NRRL Y-27907 in the Production of Ethanol, Xylitol, and Single Cell Protein from Sugarcane BagasseBioEnergy Research, 2021
- Redox potential as a key parameter for monitoring and optimization of xylose fermentation with yeast Spathaspora passalidarum under limited-oxygen conditionsBioprocess and Biosystems Engineering, 2020
- Understanding the effect of high gas entrance velocity on Chinese hamster ovary (CHO) cell culture performance and its implications on bioreactor scale‐up and sparger designBiotechnology and Bioengineering, 2020
- Comparison of the hydrodynamics and mass transfer characteristics in internal-loop airlift bioreactors utilizing either a novel membrane-tube sparger or perforated plate spargerBioprocess and Biosystems Engineering, 2014
- Consolidated Bioprocessing for Bioethanol Production Using Saccharomyces cerevisiae2007
- Alcoholic fermentation of glucose and xylose by Pichia stipitis, Candida shehatae, Saccharomyces cerevisiae and Zymomonas mobilis: oxygen requirement as a key factorApplied Microbiology and Biotechnology, 1991