Plasma and Flow Simulation of the Ion Wind in a Surface Barrier Discharge Used for Gas Conversion Benchmarked by Schlieren Imaging
Authors:
Open Access
- 3 December 2024
- journal article
- research article
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 45 (1) , 85-112
Abstract
Surface dielectric barrier discharges (sDBD) are efficient and scalable plasma sources for plasma-based gas conversion. One prominent feature of an sDBD is the generation of an ion wind, which exerts a force on the neutrals, thus leading to an efficient mixing of plasma and a passing gas stream. This becomes apparent by the creation of upstream and downstream vortices in the vicinity of the plasma. In this study, these vortices are generated by high voltage burst pulses consisting of two half cycles of an almost sinusoidal voltage shape. The vortices are monitored by Schlieren imaging diagnostic to benchmark and connect two simulations of the sDBD: a plasma model simulating a streamer for 25 ns starting from the electrode and propagating along a dielectric surface followed by a decay. The streamer is the source of electrical charges accelerated as ion wind by the applied electric field from the sDBD power supply. A second flow simulation models this ion wind as a time-averaged thrust acting on the passing gas stream. The conversion of the time-resolved forces from the nanosecond plasma simulation into the steady state thrust in the flow simulation indicates that the force from the plasma lasts much longer than the actual streamer propagation phase. This is explained by the fact that the charges in the streamer channel remain present for almost 100 ns, and the voltage from the power supply lasts for a few microseconds being applied to the electrode so that ions in the streamer channel are still accelerated even after a streamer stops to propagate after a few ns. The thrust generated during the streamer phase, including the relaxation phase, agrees well with predictions from flow simulation. Additionally, properly converting the time-resolved forces from the plasma simulation into a time-averaged thrust for the flow simulation yields exactly the synthetic Schlieren images as measured in the experiments.Keywords
Funding Information
- SFB1316
- Carbon2Chem/L3
- Ruhr-Universität Bochum
This publication has 48 references indexed in Scilit:
- Application of a Scaled‐up Dielectric Barrier Discharge Reactor in the Trace Oxygen Removal in Hydrogen‐Rich Gas Mixtures at Ambient and Elevated PressureChemie Ingenieur Technik, 2024
- Surface Dielectric Barrier Discharge (sDBD) for Flow Control in Plasma ConversionPlasma Chemistry and Plasma Processing, 2023
- Interactions Between Flow Fields Induced by Surface Dielectric Barrier Discharge ArraysPlasma Chemistry and Plasma Processing, 2023
- Analysis of the effects of complex electrode geometries on the energy deposition and temporally and spatially averaged electric field measurements of surface dielectric barrier dischargesPlasma Processes and Polymers, 2023
- Formation of surface ionization waves in a plasma enhanced packed bed reactor for catalysis applicationsChemical Engineering Journal, 2020
- LXCat: an Open‐Access, Web‐Based Platform for Data Needed for Modeling Low Temperature PlasmasPlasma Processes and Polymers, 2016
- Electrical and mechanical characteristics of surface AC dielectric barrier discharge plasma actuators applied to airflow controlExperiments in Fluids, 2014
- Experimental and computational study of the flow induced by a plasma actuatorInternational Journal of Heat and Fluid Flow, 2013
- Single-dielectric barrier discharge plasma actuator modelling and validationJournal of Fluid Mechanics, 2011
- THE HITRAN MOLECULAR SPECTROSCOPIC DATABASE AND HAWKS (HITRAN ATMOSPHERIC WORKSTATION): 1996 EDITIONJournal of Quantitative Spectroscopy and Radiative Transfer, 1998