Effect of Ni-W microcrystalline coating on plastic deformation behavior of Cu substrate
Open Access
- 1 August 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (8) , 086513
Abstract
Microcrystalline Ni-W alloy layers with different thickness were electroplated on the surface of Cu substrate. The mechanical properties of coating samples with different thickness were analyzed. The microstructure and fracture morphology between the substrate and the coating were observed by SEM (scanning electron microscopy) and EDS (energy dispersion spectrum). The results show that the coating thickness increases linearly from 0.031 μm to 7.77 μm with the increase of electroplating time. With the Ni-W coating thickness increasing, the microstructure of fracture changes from cross cracks to straight cracks, the number of cracks per unit area decreases, and the crack spacing increases from 0.79 ± 0.35 μm to 153.56 ± 35.16 μm. The strength and plasticity of samples with Ni-W coating are higher than those of Cu substrate film because of the restriction in dislocation movement and surface work hardening. At the same time, the coating cracks hinder the dislocation movement, absorb energy and restrain the crack growth. When the coating breaks, the dislocation slip behavior will change into plastic deformation, and there is a synergistic mechanism of interface strengthening between the substrate and the coating.Keywords
Funding Information
- Natural Science Foundation of Liaoning Province (2020-YKLH-31)
- Crossing Research Project (JSZX202019)
This publication has 15 references indexed in Scilit:
- Gradient Confinement Induced Uniform Tensile Ductility in Metallic GlassScientific Reports, 2013
- Corrosion behaviour of CrN/Cr multilayers on stainless steel deposited by unbalanced magnetron sputteringVacuum, 2012
- The heat treatment effect on the structure and mechanical properties of electrodeposited nano grain size Ni–W alloy coatingsThin Solid Films, 2010
- Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloyMaterials & Design (1980-2015), 2009
- Mechanical properties of reticulated aluminum foams with electrodeposited Ni–W coatingsScripta Materialia, 2008
- Bauschinger and size effects in thin-film plasticityActa Materialia, 2006
- Demonstration of an inverse Hall–Petch relationship in electrodeposited nanocrystalline Ni–W alloys through tensile testingScripta Materialia, 2006
- Bauschinger effect in thin metal filmsScripta Materialia, 2005
- Tensile deformation and microstructure of a nanocrystalline Ni–W alloy produced by electrodepositionScripta Materialia, 2004
- Thermal stability of nanocrystalline nickel–18 at.% tungsten alloy investigated with the tomographic atom probeMaterials Science and Engineering: A, 2003