Pengyuan Qi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Pengyuan Qi has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Shiyu Dai
Liaoning Key Laboratory of Chemical Additive Synthesis and Separation, Yingkou Institute of Technology, Yingkou Liaoning, 115014, People’s Republic of China
5 shared publicationsGang Wang
Liaoning Key Laboratory of Chemical Additive Synthesis and Separation, Yingkou Institute of Technology, Yingkou Liaoning, 115014, People’s Republic of China
4 shared publicationsJingyu Zhong
Yingkou City Product Quality Supervision and Inspection Institute, Yingkou, CHINA
3 shared publicationsChunlai Hao
Liaoning Provincial Engineering Research Center for High-Value Utilization of Magnesite, Yingkou Institute of Technology, Yingkou Liaoning 115014, People’s Republic of China
2 shared publicationsLili Jiang
Department of Materials Science and Engineering, Yingkou Institute of Technology, Yingkou, Liaoning, China
2 shared publicationsLinhui Yu
Yingkou Dongbang Environmental Science and Technology Co., LTD, Yingkou Liaoning 115000, People’s Republic of China
2 shared publications
Latest Publications
- 29 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055020
Preparation and degradation performance of CexBi1-xGdO3 photocatalytic material based on organic wastewater treatment
In the industries such as textiles, printing, and papermaking, a large amount of organic dye wastewater is generated, which has obvious characteristics such as long pollution persistence, high bioaccumulation and toxicity, accelerating urban environmental pollution and deterioration. Photocatalysis is an efficient technology for purifying and treating environmental polluted water. Gd-Bi composite oxides with perovskite structure exhibit excellent photoelectric activity in the visible light region, and are expected to be applied in the fields of water pollution prevention and control. In this paper, Cerium ion doped Bismuth Gadolinium (CexBi1-xGdO3) nanoparticles were prepared by co-precipitation method. The effects of sintering temperature and pH value on the phase change and morphology of the products were analyzed and the effects of Ce3+ doping on the photocatalytic performance of the samples were also discussed. The results showed that when pH = 9 and sintering temperature T = 700 °C, the cubic bismuth gadolinium with high crystallinity was obtained. When the cerium ion doping ratio was 6%, the catalytic efficiency of CexBi1-xGdO3 powder for methylene blue (MB) solution could reach 93.8%, and the catalytic rate constant was approximately 4 times that of the undoped BiGdO3 sample. The photocatalytic efficiency of Ce0.06Bi0.94GdO3 was still up to 85.2% after 4 recycles.
- 29 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055020
Preparation and degradation performance of CexBi1-xGdO3 photocatalytic material based on organic wastewater treatment
In the industries such as textiles, printing, and papermaking, a large amount of organic dye wastewater is generated, which has obvious characteristics such as long pollution persistence, high bioaccumulation and toxicity, accelerating urban environmental pollution and deterioration. Photocatalysis is an efficient technology for purifying and treating environmental polluted water. Gd-Bi composite oxides with perovskite structure exhibit excellent photoelectric activity in the visible light region, and are expected to be applied in the fields of water pollution prevention and control. In this paper, Cerium ion doped Bismuth Gadolinium (CexBi1-xGdO3) nanoparticles were prepared by co-precipitation method. The effects of sintering temperature and pH value on the phase change and morphology of the products were analyzed and the effects of Ce3+ doping on the photocatalytic performance of the samples were also discussed. The results showed that when pH = 9 and sintering temperature T = 700 °C, the cubic bismuth gadolinium with high crystallinity was obtained. When the cerium ion doping ratio was 6%, the catalytic efficiency of CexBi1-xGdO3 powder for methylene blue (MB) solution could reach 93.8%, and the catalytic rate constant was approximately 4 times that of the undoped BiGdO3 sample. The photocatalytic efficiency of Ce0.06Bi0.94GdO3 was still up to 85.2% after 4 recycles.
- Open Access
Study on the Preparation and Optical Properties of Ce3+ Doped GdAlO3 Nanoparticles by Co-Precipitation Method
Nanoparticles of GdAlO3:Ce were synthesized with sodium dodecylbenzene sulfonate (SDBS) as the dispersant and ammonia as the precipitant by co-precipitation reaction to prepare precursors under different conditions. The phase composition of the precursors and the particle morphology were characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The excitation and emission spectra of the resultant samples were analyzed using a photoluminescence spectroscope (PL). The results showed that the as-prepared, well-dispersed, nano-sized GdAlO3:Ce powder displayed spherical morphology at the initial concentration of metallic salt in liquor of 0.3 mol/L; the synthesized temperature was 0 °C, and it was calcined at 1300 °C for 2 h. The relative intensity of the photoluminescence peak had the maximum value when the Ce3+ dopant content was 0.9 mol% (mole fraction). The concentration quench occurred when the Ce3+ dopant content exceeded 0.9 mol%, and the peak of the excitation spectrum appeared at a wavelength of 381 nm.
Open AccessStudy on the Preparation and Optical Properties of Ce3+ Doped GdAlO3 Nanoparticles by Co-Precipitation Method
Nanoparticles of GdAlO3:Ce were synthesized with sodium dodecylbenzene sulfonate (SDBS) as the dispersant and ammonia as the precipitant by co-precipitation reaction to prepare precursors under different conditions. The phase composition of the precursors and the particle morphology were characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The excitation and emission spectra of the resultant samples were analyzed using a photoluminescence spectroscope (PL). The results showed that the as-prepared, well-dispersed, nano-sized GdAlO3:Ce powder displayed spherical morphology at the initial concentration of metallic salt in liquor of 0.3 mol/L; the synthesized temperature was 0 °C, and it was calcined at 1300 °C for 2 h. The relative intensity of the photoluminescence peak had the maximum value when the Ce3+ dopant content was 0.9 mol% (mole fraction). The concentration quench occurred when the Ce3+ dopant content exceeded 0.9 mol%, and the peak of the excitation spectrum appeared at a wavelength of 381 nm.
- Open Access
- 1 November 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (11) , 115504
Research on the development of recycling technology for magnesium refractory materials
Magnesium refractory materials are rich in substances such as alumina and magnesium oxide, and the recycling and reuse of their waste is an important way to achieve energy conservation, environmental protection, and sustainable development of mineral resources. This article analyzes and elucidates the current recycling and utilization technologies of refractory materials from the perspectives of refractory waste used in desulfurization mixing heads, recycled magnesia carbon brick refractory materials, magnesia calcium brick refractory materials, and blast furnace lining refractory materials. By analyzing the key issues in the recycling and utilization technology of Magnesium refractory waste, important references are provided for the development direction of deep processing of high-quality refractory recycled products.
- 1 November 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (11) , 115504
Open AccessResearch on the development of recycling technology for magnesium refractory materials
Magnesium refractory materials are rich in substances such as alumina and magnesium oxide, and the recycling and reuse of their waste is an important way to achieve energy conservation, environmental protection, and sustainable development of mineral resources. This article analyzes and elucidates the current recycling and utilization technologies of refractory materials from the perspectives of refractory waste used in desulfurization mixing heads, recycled magnesia carbon brick refractory materials, magnesia calcium brick refractory materials, and blast furnace lining refractory materials. By analyzing the key issues in the recycling and utilization technology of Magnesium refractory waste, important references are provided for the development direction of deep processing of high-quality refractory recycled products.
- 13 March 2023
- Published by Elsevier in Materials Letters
- Vol. 341
Effect of co-precipitation synthesis parameters on gadolinium aluminate nanoparticles
- 13 March 2023
- Published by Elsevier in Materials Letters
- Vol. 341
Effect of co-precipitation synthesis parameters on gadolinium aluminate nanoparticles
- Open Access
- 25 November 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (12) , 125008
Study of gadolinium aluminate nanoparticles with perovskite structure prepared by citric acid chelation method
Gadolinium aluminate (GdAlO3, GAP) is a rare earth compound with perovskite structure. Its optical isotropic structure prevents the defects of refractive index difference in any direction. GAP has unique and excellent properties in electricity, magnetism, luminescence and catalysis, especially as a high-quality luminescent matrix material. Sol-gel method has the advantages of accurate control of chemical composition, particle size and purity of products. The main preparation parameters include chelating agent concentration, alcohol water ratio, calcination temperature and so on. In this paper, the citric acid chelating agent was used to prepare gadolinium aluminate nanoparticles by sol-gel method, thermogravimetry-differential thermal analysis (TG-DTA), x-ray diffraction (XRD) and scanning electron microscope (SEM) were employed to analyze the effects of chelating agent, dispersant, solvent and calcination temperature on the phase and morphology changing in precursor and final product. The results show that GAP nanoparticles with high degree of crystallinity, nearly spherical morphology and 60–100 nm particle size can be obtained at the molar ratio of citric acid to cationic of 1:1, the ammonium citrate to citric acid of 1.5:1 and the calcination temperature of 900 °C for 4 h. When the calcination temperature is higher than 1100 °C, a new phase of Gd3Al5O12 (GdAG) will be formed with calcination neck shape.
- 25 November 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (12) , 125008
Open AccessStudy of gadolinium aluminate nanoparticles with perovskite structure prepared by citric acid chelation method
Gadolinium aluminate (GdAlO3, GAP) is a rare earth compound with perovskite structure. Its optical isotropic structure prevents the defects of refractive index difference in any direction. GAP has unique and excellent properties in electricity, magnetism, luminescence and catalysis, especially as a high-quality luminescent matrix material. Sol-gel method has the advantages of accurate control of chemical composition, particle size and purity of products. The main preparation parameters include chelating agent concentration, alcohol water ratio, calcination temperature and so on. In this paper, the citric acid chelating agent was used to prepare gadolinium aluminate nanoparticles by sol-gel method, thermogravimetry-differential thermal analysis (TG-DTA), x-ray diffraction (XRD) and scanning electron microscope (SEM) were employed to analyze the effects of chelating agent, dispersant, solvent and calcination temperature on the phase and morphology changing in precursor and final product. The results show that GAP nanoparticles with high degree of crystallinity, nearly spherical morphology and 60–100 nm particle size can be obtained at the molar ratio of citric acid to cationic of 1:1, the ammonium citrate to citric acid of 1.5:1 and the calcination temperature of 900 °C for 4 h. When the calcination temperature is higher than 1100 °C, a new phase of Gd3Al5O12 (GdAG) will be formed with calcination neck shape.
- Open Access
- 1 August 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (8) , 086513
Effect of Ni-W microcrystalline coating on plastic deformation behavior of Cu substrate
Microcrystalline Ni-W alloy layers with different thickness were electroplated on the surface of Cu substrate. The mechanical properties of coating samples with different thickness were analyzed. The microstructure and fracture morphology between the substrate and the coating were observed by SEM (scanning electron microscopy) and EDS (energy dispersion spectrum). The results show that the coating thickness increases linearly from 0.031 μm to 7.77 μm with the increase of electroplating time. With the Ni-W coating thickness increasing, the microstructure of fracture changes from cross cracks to straight cracks, the number of cracks per unit area decreases, and the crack spacing increases from 0.79 ± 0.35 μm to 153.56 ± 35.16 μm. The strength and plasticity of samples with Ni-W coating are higher than those of Cu substrate film because of the restriction in dislocation movement and surface work hardening. At the same time, the coating cracks hinder the dislocation movement, absorb energy and restrain the crack growth. When the coating breaks, the dislocation slip behavior will change into plastic deformation, and there is a synergistic mechanism of interface strengthening between the substrate and the coating.
- 1 August 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (8) , 086513
Open AccessEffect of Ni-W microcrystalline coating on plastic deformation behavior of Cu substrate
Microcrystalline Ni-W alloy layers with different thickness were electroplated on the surface of Cu substrate. The mechanical properties of coating samples with different thickness were analyzed. The microstructure and fracture morphology between the substrate and the coating were observed by SEM (scanning electron microscopy) and EDS (energy dispersion spectrum). The results show that the coating thickness increases linearly from 0.031 μm to 7.77 μm with the increase of electroplating time. With the Ni-W coating thickness increasing, the microstructure of fracture changes from cross cracks to straight cracks, the number of cracks per unit area decreases, and the crack spacing increases from 0.79 ± 0.35 μm to 153.56 ± 35.16 μm. The strength and plasticity of samples with Ni-W coating are higher than those of Cu substrate film because of the restriction in dislocation movement and surface work hardening. At the same time, the coating cracks hinder the dislocation movement, absorb energy and restrain the crack growth. When the coating breaks, the dislocation slip behavior will change into plastic deformation, and there is a synergistic mechanism of interface strengthening between the substrate and the coating.
- Open Access
- 1 March 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (3) , 035021
Hydrothermal-solid state synthesis of Gadolinium aluminate nano whiskers with alkaline mineralizer
Gadolinium aluminate (GdAlO3, GAP) nano whiskers were synthesized by the hydrothermal-solid state method, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermogravimetry-differential thermal analysis (TG-DTA) were employed to analyze the phase change and the nucleation mechanism of GAP during calcing process. The results show that the precursor of GAP prepared by hydrothermal is (NH4)xGdAl(OH)y(NO3)z·nH2O. When the calcination temperature is higher than 900 °C, the precursor recrystallizes, forming the needle shape GAP under the synergistic effect factors. The best preparation conditions are as follows: ammonia water as mineralizer, pH = 9, calcination temperature 1100 °C and holding time 3 h.
- 1 March 2020
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (3) , 035021
Open AccessHydrothermal-solid state synthesis of Gadolinium aluminate nano whiskers with alkaline mineralizer
Gadolinium aluminate (GdAlO3, GAP) nano whiskers were synthesized by the hydrothermal-solid state method, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermogravimetry-differential thermal analysis (TG-DTA) were employed to analyze the phase change and the nucleation mechanism of GAP during calcing process. The results show that the precursor of GAP prepared by hydrothermal is (NH4)xGdAl(OH)y(NO3)z·nH2O. When the calcination temperature is higher than 900 °C, the precursor recrystallizes, forming the needle shape GAP under the synergistic effect factors. The best preparation conditions are as follows: ammonia water as mineralizer, pH = 9, calcination temperature 1100 °C and holding time 3 h.
- 9 January 2020
- Published by SAGE Publications in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
- Vol. 38 (4) , 3755-3764
The use of improved algorithm of adaptive neuro-fuzzy inference system in optimization of machining parameters
In order to effectively avoid the violent vibration in the process of mechanical processing and to achieve high efficiency and high precision machining of mechanical parts, the improved algorithm of adaptive neuro-fuzzy inference system is used to study the optimization of parameters in the process of side milling of mechanical parts, and an adaptive network structure is formed. It has the learning ability of artificial neural network and the expression ability of “if-then” of fuzzy reasoning system, which is a new prediction and control method. The results validate the applicability of the stability. The machined surface topography is measured and the effect of flutter on the surface topography is analyzed. The three-dimensional stability of milling provides a theoretical basis for the rational selection of milling parameters of mechanical parts, the realization of stable milling and the improvement of processing efficiency. Thus, the relationship between the radial depth of cut, the axial depth of cut and the spindle speed is established, and the contour of material removal rate is obtained. The corresponding spindle speed and radial shear depth are obtained when the material removal rate is maximum. The reasonable selection of machining parameters is carried out in the region near the maximum spindle speed with stability.
- 9 January 2020
- Published by SAGE Publications in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
- Vol. 38 (4) , 3755-3764
The use of improved algorithm of adaptive neuro-fuzzy inference system in optimization of machining parameters
In order to effectively avoid the violent vibration in the process of mechanical processing and to achieve high efficiency and high precision machining of mechanical parts, the improved algorithm of adaptive neuro-fuzzy inference system is used to study the optimization of parameters in the process of side milling of mechanical parts, and an adaptive network structure is formed. It has the learning ability of artificial neural network and the expression ability of “if-then” of fuzzy reasoning system, which is a new prediction and control method. The results validate the applicability of the stability. The machined surface topography is measured and the effect of flutter on the surface topography is analyzed. The three-dimensional stability of milling provides a theoretical basis for the rational selection of milling parameters of mechanical parts, the realization of stable milling and the improvement of processing efficiency. Thus, the relationship between the radial depth of cut, the axial depth of cut and the spindle speed is established, and the contour of material removal rate is obtained. The corresponding spindle speed and radial shear depth are obtained when the material removal rate is maximum. The reasonable selection of machining parameters is carried out in the region near the maximum spindle speed with stability.
- 27 November 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 125516
Preparation and characterization of zeolite/diatomite composite materials
- 27 November 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 125516
Preparation and characterization of zeolite/diatomite composite materials