A comparative human health, ecotoxicity, and product environmental assessment on the production of organic and silicon solar cells
- 11 November 2015
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 24 (5) , 645-655
Abstract
A life cycle assessment case study involving organic photovoltaic technology using phenyl‐C61‐butyric acid methyl ester and poly(3‐hexylthiophene) is presented. Although solar technology converts freely available solar radiation into more useful forms of energy, potential environmental impacts can occur during the life cycle of the product. A cradle‐to‐gate life cycle assessment is completed, comparing organic solar cells with traditional silicon‐based cells across 18 multiple criteria. The functional unit is defined as the production of 1 watt‐peak of electricity produced. The inventory is based on prospective organic solar cell technology and two traditional silicon technologies. The results demonstrate that from a life cycle perspective, organic solar cells can outperform conventional silicon solar cells with impacts reduced by 93%. The energy payback time for the default organic photovoltaic cell was 0.21 years (75 days) compared with multicrystalline silicon and amorphous silicon's 2.7 and 2.2 years, respectively. The minimum required lifetime of the organic cells, so that their impacts were no worse than amorphous silicon's over 25 years, was measured between 1.2 and 8.9 years. Results of the sensitivity analysis demonstrate that consideration of manufacturing routes (e.g., fullerene or solar cell production) can be targeted using life cycle assessment for further improvements in the environmental, human health, and ecotoxicity profile of organic solar cells. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- University of Bordeaux
- French National Center for Scientific Research
- LCA Chair of the Region of Aquitaine
This publication has 34 references indexed in Scilit:
- A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditionsSolar Energy Materials and Solar Cells, 2011
- Gravure printed flexible organic photovoltaic modulesSolar Energy Materials and Solar Cells, 2011
- Material and Energy Intensity of Fullerene ProductionEnvironmental Science & Technology, 2011
- Preparation of fluorine-doped tin oxide (SnO2:F) film on polyethylene terephthalate (PET) substrateMaterials Letters, 2010
- Life cycle analysis of organic photovoltaic technologiesProgress in Photovoltaics: Research and Applications, 2010
- Ex‐ante environmental and economic evaluation of polymer photovoltaicsProgress in Photovoltaics: Research and Applications, 2009
- Kinetics of the Oxidative Roasting of Low Grade Mongolian Molybdenite ConcentrateMATERIALS TRANSACTIONS, 2009
- Life Cycle Assessment of Photovoltaics; Update of the ecoinvent DatabaseMRS Proceedings, 2007
- Effect of LiF/metal electrodes on the performance of plastic solar cellsApplied Physics Letters, 2002
- End-of-life management and recycling of PV modulesEnergy Policy, 2000