MTMichael P. Tsang

Michael P. Tsang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael P. Tsang has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Life cycle assessment of organic photovoltaic charger use in Europe: the role of product use intensity and irradiation

    by Edis Glogic, Steffi Weyand, Michael P. Tsang, Steven B. Young, Liselotte Schebek, Guido Sonnemann


  • Evaluating nanotechnology opportunities and risks through integration of life-cycle and risk assessment

    by Michael P. Tsang, Emi Kikuchi-Uehara, Guido W. Sonnemann, Cyril Aymonier, Masahiko Hirao

    It has been some 15 years since the topics of sustainability and nanotechnologies first appeared together in the scientific literature and became a focus of organizations' research and policy developments. On the one hand, this focus is directed towards approaches and tools for risk assessment and management and on the other hand towards life-cycle thinking and assessment. Comparable to their application for regular chemicals, each tool is seen to serve separate objectives as it relates to evaluating nanotechnologies' safety or resource efficiency, respectively. While nanomaterials may provide resource efficient production and consumption, this must balance any potential hazards they pose across their life-cycles. This Perspective advocates for integrating these two tools at the methodological level for achieving this objective, and it explains what advantages and challenges this offers decision-makers while highlighting what research is needed to further enhance integration.


  • Modeling human health characterization factors for indoor nanomaterial emissions in life cycle assessment: a case-study of titanium dioxide

    by Michael P. Tsang, Dingsheng Li, Kendra L. Garner, Arturo A. Keller, Sangwon Suh, Guido W. Sonnemann

    A dynamic life cycle impact assessment model demonstrates a non-constant intake fraction of inhaled nano-TiO 2 as total emissions changes.


  • Probabilistic risk assessment of emerging materials: case study of titanium dioxide nanoparticles

    by Michael P. Tsang, Danail Hristozov, Alex Zabeo, Antti Joonas Koivisto, Alexander Christian Østerskov Jensen, Keld Alstrup Jensen, Chengfang Pang, Antonio Marcomini, Guido Sonnemann

    The development and use of emerging technologies such as nanomaterials can provide both benefits and risks to society. Emerging materials may promise to bring many technological advantages but may not be well characterized in terms of their production volumes, magnitude of emissions, behaviour in the environment and effects on living organisms. This uncertainty can present challenges to scientists developing these materials and persons responsible for defining and measuring their adverse impacts. Human health risk assessment is a method of identifying the intrinsic hazard of and quantifying the dose–response relationship and exposure to a chemical, to finally determine the estimation of risk. Commonly applied deterministic approaches may not sufficiently estimate and communicate the likelihood of risks from emerging technologies whose uncertainty is large. Probabilistic approaches allow for parameters in the risk assessment process to be defined by distributions instead of single deterministic values whose uncertainty could undermine the value of the assessment. A probabilistic approach was applied to the dose–response and exposure assessment of a case study involving the production of nanoparticles of titanium dioxide in seven different exposure scenarios. Only one exposure scenario showed a statistically significant level of risk. In the latter case, this involved dumping high volumes of nano-TiO2 powders into an open vessel with no personal protection equipment. The probabilistic approach not only provided the likelihood of but also the major contributing factors to the estimated risk (e.g. emission potential).


  • Probabilistic approach for assessing infants' health risks due to ingestion of nanoscale silver released from consumer products

    by Chengfang Pang, Danail Hristozov, Alex Zabeo, Lisa Pizzol, Michael P. Tsang, Phil Sayre, Antonio Marcomini


  • Anticipatory life-cycle assessment of supercritical fluid synthesis of barium strontium titanate nanoparticles

    by Michael Tsang, Gilles Philippot, Cyril Aymonier, Guido Sonnemann

    Supercritical fluid synthesis offers an attractive and unique method to produce metal oxide nanoparticles such as barium strontium titanate (Ba1−xSrxTiO3 with 0 ≤ x ≤ 1). This synthesis pathway has the advantage of producing high quality, highly crystalline nanoparticles in a narrow size range, with accurate control of the elemental composition not easily afforded by other methods of production. Coupled with moderate reaction temperatures and short reaction times, this method could be an environmentally preferred synthesis route compared to conventional synthesis pathways. This paper examines the potential environmental impacts leading from the lab-scale supercritical synthesis of 1 kg of Ba0.6Sr0.4TiO3 nanoparticles of an average size 16 nm using the approach of an anticipatory life-cycle assessment. A cradle-to-gate assessment was completed, estimating the impacts across resource extraction, material processing, and production of the nanoparticles, while excluding any associated use-phase or end-of-life considerations. The life-cycle assessment highlights a number of ways by which the environmental profile of the supercritical synthesis of barium strontium titanate nanoparticles could be improved. Lab-scale synthesis was bound by physical constraints of the reactor, whereby the precursor concentration was kept artificially low. Being able to synthesize nanoparticles with precursor concentrations of 0.1 and 1.0 molar would reduce the average life-cycle impacts by nearly 81% and 95%, respectively. Additionally, the recovery and reuse of solvents at high recycling rates (e.g. 90%) could reduce average life-cycle impacts by 56%. At high precursor concentrations and solvent recycling rates, the environmental performance was further limited by the precursors, namely barium and titanium alkoxides, which have high upstream life-cycle demands (i.e. isopropanol production and metal processing). General impact reductions were seen as the ratio of strontium : barium increased. Further reductions could be achieved by replacing the barium, strontium and titanium alkoxides with precursors having better life-cycle profiles such as barium and strontium acetates or barium and strontium hydroxides.


  • A comparative human health, ecotoxicity, and product environmental assessment on the production of organic and silicon solar cells

    by Michael P. Tsang, Guido W. Sonnemann, Dario M. Bassani

    A life cycle assessment case study involving organic photovoltaic technology using phenyl‐C61‐butyric acid methyl ester and poly(3‐hexylthiophene) is presented. Although solar technology converts freely available solar radiation into more useful forms of energy, potential environmental impacts can occur during the life cycle of the product. A cradle‐to‐gate life cycle assessment is completed, comparing organic solar cells with traditional silicon‐based cells across 18 multiple criteria. The functional unit is defined as the production of 1 watt‐peak of electricity produced. The inventory is based on prospective organic solar cell technology and two traditional silicon technologies. The results demonstrate that from a life cycle perspective, organic solar cells can outperform conventional silicon solar cells with impacts reduced by 93%. The energy payback time for the default organic photovoltaic cell was 0.21 years (75 days) compared with multicrystalline silicon and amorphous silicon's 2.7 and 2.2 years, respectively. The minimum required lifetime of the organic cells, so that their impacts were no worse than amorphous silicon's over 25 years, was measured between 1.2 and 8.9 years. Results of the sensitivity analysis demonstrate that consideration of manufacturing routes (e.g., fullerene or solar cell production) can be targeted using life cycle assessment for further improvements in the environmental, human health, and ecotoxicity profile of organic solar cells. Copyright © 2015 John Wiley & Sons, Ltd.


  • Life‐cycle impacts of soybean and algae biodiesel: Case study of US marine vessels

    by Michael Tsang, Cate Fox‐Lent, Sean Wallace, Tim Welp, Matthew Bates, Igor Linkov

    The push to find alternatives to fossil fuels has driven research and consumption of biofuels. Recent actions in the United States have placed an emphasis on the use of renewable fuels for improved sustainability of government operations. In 2013, the United States Army Corps of Engineers (USACE) measured atmospheric emissions from two navigation vessels consuming three different fuel types and found that biofuels have the potential to lower atmospheric emissions. These fuels have widely different production processes, however, and a full life‐cycle assessment is necessary to provide a complete picture of these biofuels. The goal of this study was to identify whether transitioning navigation vessels to operate on biodiesel would have the potential to lower human health and environmental impacts. This study focuses on the complete life cycle of these fuels in USACE marine vessels by employing a well‐to‐wheels life‐cycle assessment comparing the impacts of a 100% soy‐based biodiesel and an algal‐based biodiesel blend to a conventional diesel. Overall, soybean‐based biodiesel had lower impacts compared to algal‐based biodiesel. Impacts from conventional diesel were generally lower than algal‐based biodiesel, but impacts between conventional diesel and soybean‐based biodiesel were mixed. While greenhouse gas emissions during the use phase were reduced for the biofuels (after considering only the non‐biogenic fraction of carbon emission), a complete look at the life‐cycle resulted in cases where emissions could be greater than conventional diesel. Biodiesel impacts depended greatly on modeling assumptions made in the life‐cycle system boundaries and inventory such as allocation method and assumptions about feedstock growth and harvesting. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.