Ecological adhesive based on cassava starch: a sustainable alternative to replace urea-formaldehyde (UF) in particleboard manufacture
Authors:
- Prosper MensahProsper Mensah
- Rafael Rodolfo de MeloRafael Rodolfo de Melo
- Stephen Jobson MitchualSMStephen Jobson Mitchual
- Francis Wilson OwusuFOFrancis Wilson Owusu
- Michael Awotwe MensahMMMichael Awotwe Mensah
- Mark Bright DonkohMDMark Bright Donkoh
- Edgley Alves de Oliveira PaulaEPEdgley Alves de Oliveira Paula
- Talita Dantas PedrosaTPTalita Dantas Pedrosa
- Francisco Rodolfo Rodolfo JuniorFJFrancisco Rodolfo Rodolfo Junior
- Fernando RuschFRFernando Rusch
Open Access
- 1 January 2024
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (2) , e20230373
Abstract
This study assessed the properties of particleboard produced from the replacement of urea formaldehyde with cassava starch. Cassava starch (CS) and urea-formaldehyde (UF) were mixed at percentages of 100/0, 90/10, 70/30, 50/50, and 0/100, respectively. The mixture was added to the wood particles at 15% adhesive content based on the weight of oven-dried particles. Particleboards of sizes 20 mm × 300 mm × 300 mm and a targeted density of 600 kg m–3 were manufactured by hot-pressing at 170 °C, compacting pressure 3.5 MPa for 8 min. Physical and mechanical properties (density, thickness swelling, water absorption, static bending, and hardness) were tested. The physical and mechanical properties also increased in the highest proportions of UF. Comparatively, manufactured with 50% CS + 50% UF, it performed better in all the evaluated properties. Thus, it could adopt the latter mixed ratio in the industry to reduce the quantity and cost of UF and its environmental emissions. The results obtained were adequate and in conformity with international standards. Hence, it could mix cassava starch and urea formaldehyde adhesives in different ratios to get desirable properties. It is possible to conclude that cassava starch could be considered a sustainable alternative adhesive.Keywords
This publication has 50 references indexed in Scilit:
- Physical–mechanical properties of wood panel composites produced with Qualea sp. sawdust and recycled polypropyleneEnvironmental Science and Pollution Research, 2019
- Effect of spent sulfite liquor on urea–formaldehyde resin performanceJournal of Applied Polymer Science, 2018
- Biocomposites based on cellulose and starch modified urea‐formaldehyde resin: Hydrolytic, thermal, and radiation stabilityPolymer Composites, 2018
- Ligneous resole adhesives for exterior-grade plywoodEuropean Journal of Wood and Wood Products, 2017
- Environmentally friendly wood adhesives based on chestnut (Castanea sativa) shell tanninsEuropean Journal of Wood and Wood Products, 2016
- Cassava: Its polymer, fiber, composite, and applicationPolymer Composites, 2015
- Investigation of a new natural particleboard adhesive composed of tannin and sucroseJournal of Wood Science, 2014
- Chemical and functional properties of cassava starch, durum wheat semolina flour, and their blendsFood Science & Nutrition, 2014
- The manufacture of particleboards using mixture of reed (surface layer) and commercial species (middle layer)European Journal of Wood and Wood Products, 2010
- Bamboo chips ( Bambusa vulgaris ) as an alternative lignocellulosic raw material for particleboard manufactureEuropean Journal of Wood and Wood Products, 2004