Effect of Surface Conditioning on the Bond Strength Between 3D-printed PMMA Denture Bases and Resin-based Artificial Teeth
Open Access
- 12 August 2026
- journal article
- Published by Bentham Science Publishers Ltd. in The Open Dentistry Journal
- Vol. 20 (1)
Abstract
Introduction: This study aimed to evaluate the effect of different surface conditioning protocols on the Shear Bond Strength (SBS) between SLA-based 3D-printed PMMA denture base and resin-based artificial teeth. Methods: Forty denture base specimens were fabricated using stereolithography-based 3D printing and allocated into four groups (n = 10): control (unpolymerized resin-only), bonding agent, monomer + sandblasting, and monomer-only. The teeth were attached to the denture base specimens with the base resin monomer. SBS was measured using a universal testing machine. Failure modes were classified, and surface topographies were examined by Scanning Electron Microscopy (SEM). Statistical analyses were performed using Welch’s one-way ANOVA with Games-Howell post-hoc tests and Pearson’s chi-square test (α = 0.05). Results: Significant differences in SBS were observed among the surface conditioning protocols ( p < 0.001). The monomer-only group exhibited the highest SBS values, followed by the sandblasting + monomer group, the control group, and the bonding agent group. Mixed failures, defined as fractures occurring both at the tooth-denture base interface and within the material, were predominantly observed in the monomer-only and sandblasting + monomer groups, whereas adhesive failures were more frequent in the bonding agent group. SEM analysis revealed distinct qualitative surface morphologies associated with each conditioning protocol, including smoother surfaces in the control group and more porous and irregular surface structures after monomer application. Discussion: The higher SBS values observed after monomer application may be associated with improved interaction between the denture base resin and artificial teeth. In addition, the qualitative SEM observations suggested that differences in surface morphologies may have contributed to variations in interfacial adhesion among the tested groups. Conclusion: Monomer application demonstrated the highest bond strength values among the evaluated surface conditioning protocols for bonding resin-based artificial teeth to SLA-based 3D-printed PMMA denture base resin.Keywords
This publication has 13 references indexed in Scilit:
- Targeting bonding protocols to increase the bond between acrylic resin or 3D printed denture bases and prefabricated or 3D printed denture teethThe Journal of Prosthetic Dentistry, 2024
- Impact of CAD/CAM Material and Bonding Protocol on the Bond Strength Between Denture Bases and Artificial Teeth: A Systematic Review and Meta-analysisThe International Journal of Prosthodontics, 2023
- Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unitJournal of Prosthodontic Research, 2023
- In Vitro Analysis of Shear Stress: CAD Milled vs Printed Denture Base Resins with Bonded Denture ToothJournal of Prosthodontics, 2022
- Evaluation of Shear Bond Strength Between Denture Teeth and 3D‐Printed Denture Base ResinJournal of Prosthodontics, 2022
- Mode of Bond Failure Between 3D-Printed Denture Teeth and Printed Resin Base Material: Effect of Fabrication Technique and Dynamic Loading. An In Vitro StudyThe International Journal of Prosthodontics, 2021
- 3D Printing in Dentistry—State of the ArtOperative Dentistry, 2020
- Bond Strength of Denture Teeth to Heat‐Cured, CAD/CAM and 3D Printed Denture AcrylicsJournal of Prosthodontics, 2019
- Bond of acrylic teeth to different denture base resins after various surface-conditioning methodsClinical Oral Investigations, 2010
- Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base materialGerodontology, 2009