Seismic Performance Test and Finite-Element Analysis of T-Shaped Steel Plate Connection for Strengthening Reinforced Concrete Beam–Column Joints
Open Access
Abstract
To enhance the seismic performance of existing reinforced concrete (RC) buildings during retrofitting, the study introduces a new type of joint connected by a T-shaped steel plate. Compared with previous similar strengthening methods, this novel structure incorporating a post-installed beam not only effectively improves the mechanical properties of RC columns, but the connectors also further enhance the integrity of the post-installed beam. Low-cycle reversed loading tests on one cast-in-place specimen (RC) and three T-shaped steel plate connection specimens (TRC1–TRC3) were conducted to evaluate failure modes, hysteresis and skeleton curves, and energy dissipation. Results show that the novel joint failure concentrates at beam-end–column steel jacket weld seams and column-side steel plate cracking, while the core-zone concrete remains intact. Compared with RC, the novel joints TRC1–TRC3 exhibit bearing capacity variations of −1.03%~+15.80% and significantly enhanced energy dissipation. The thickness of the beam’s wrapped steel improves the carrying capacity and energy dissipation, whereas the T-shaped connector thickness has limited influence on bearing capacity. ABAQUS parametric analysis indicates that bolt quantity, concrete strength, and connector thickness have limited influence and serve as secondary design factors. These findings provide a theoretical basis for retrofitting existing buildings.Keywords
Funding Information
- Shaanxi Provincial Department of Education Government–Enterprise Joint Funding Project (22JE017)
- Scientific Research Foundation for High-level Talents (XJ17T08)
This publication has 37 references indexed in Scilit:
- Seismic evaluation of existing low- to mid-rise RC buildings strengthened by a new external steel frame connected with an innovative EWSF joint deviceBulletin of Earthquake Engineering, 2026
- Seismic behavior assessment of exterior steel fiber reinforced concrete beam-column connections utilizing nonlinear finite element analysisBulletin of Earthquake Engineering, 2026
- Hysteresis behavior of RC columns with steel angle ends under various levels of axial loadEarthquake Engineering and Engineering Vibration, 2026
- Experimental Testing of Post‐installed Anchors for Use in Retrofitting of RC Frame with Steel Bracesce/papers, 2023
- Seismic Performance of Welded Steel Beam-to-Column Connections with Initial Weld DefectsInternational Journal of Steel Structures, 2022
- Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connectionsThe Structural Design of Tall and Special Buildings, 2019
- Seismic Performance of Exterior RC Beam–Column Joints Retrofitted using Various Retrofit SolutionsInternational Journal of Concrete Structures and Materials, 2017
- Retrofitting RC Joints Using Flange-Bonded FRP SheetsIranian Journal of Science and Technology, Transactions of Civil Engineering, 2016
- Experimental study on bending behavior and seismic performance of hybrid composite beam with new shapeInternational Journal of Steel Structures, 2016
- Strengthening of RC columns by steel angles and stripsAlexandria Engineering Journal, 2014