Analysis of RC Hollow Columns Strengthened with GFRP
- 1 August 2011
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 15 (4) , 545-556
Abstract
Reinforced concrete (RC) hollow piers in bridges withstand high moment and shear demands ensured with reduced mass and lower stress on foundations compared with solid piers. Failure of hollow columns is typically affected by premature buckling of reinforcing bars and concrete cover spalling. At present, no guidelines are available for the design of their upgrade, and few research investigations can be found on hollow columns strengthened by using fiber-reinforced polymer (FRP) materials. This paper discusses an experimental program carried out on purely compressed RC hollow columns externally wrapped with glass-fiber-reinforced polymer (GFRP). Three specimens were tested: one specimen was unstrengthened and used as the benchmark; the other two specimens were GFRP-wrapped with different confining reinforcement ratios. Each specimen was designed according to dated codes (i.e., prior to 1970) accounting only for gravity loads. In particular, steel longitudinal bars cross section and steel tie-spacing were de...Keywords
This publication has 5 references indexed in Scilit:
- Non-linear modeling of RC rectangular hollow piers confined with CFRPComposite Structures, 2009
- Unified theory for confinement of RC solid and hollow circular columnsComposites Part B: Engineering, 2008
- Experimental Performance of RC Hollow Columns Confined with CFRPJournal of Composites for Construction, 2007
- Seismic Retrofit of Hollow Rectangular Bridge ColumnsJournal of Composites for Construction, 2004
- Use of composites for 21st century civil infrastructureComputer Methods in Applied Mechanics and Engineering, 2000