A Millimeter-Wave CMOS Series-Doherty Power Amplifier With Post-Silicon Inter-Stage Passive Validation
- 26 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (10) , 2999-3013
Abstract
This article presents a wideband series-Doherty power amplifier (SDPA) for millimeter-wave (mm-wave) fifth-generation (5G) applications. It features a compact two-step impedance inverting-based series-Doherty power combiner that provides broadband close-to-perfect power back-off (PBO) efficiency enhancement. The amplitude-to-amplitude (AM–AM)/amplitude-to-phase (AM–PM) performance of the load-modulated Doherty power amplifier for broadband operation is analyzed. We also devise a post-silicon inter-stage passive validation (PSIV) approach to evaluate the mm-wave chip prototype utilizing the embedded voltage root mean square detectors. The proposed SDPA is realized in a 40-nm bulk CMOS, and it delivers 20.4 dBm $P_{\text {SAT}}$ with 39.1%/34% PAE at 0-/6-dB PBO. Over a 23.5–30 GHz band, its PAE is >24% at 6-dB PBO. At 27 GHz, applying a “2 GHz 16-quadratic-amplitude modulation (QAM) orthogonal frequency-division multiplexing (OFDM)” signal, the proposed SDPA generates 10.2 dBm average power with 18.9% average PAE. The average error vector magnitude is better than −24.5 dB without digital predistortion for a “400-MHz 64-QAM OFDM” signal while generating an average output power of 8.8 dBm with 15% PAE. The AM–AM/AM–PM of the realized SDPA is investigated by employing a “50-MHz 64-QAM OFDM” signal, validating our analysis and showing that the linearity limitation of DPAs is systematic and predictable. Utilizing the proposed PSIV approach, the frequency response of the input/inter-stage passive circuits is measured, indicating an excellent agreement with 3-D electromagnetic (EM) simulation results.Keywords
Funding Information
- NWO/NXP 5G Partnership (15593)
This publication has 54 references indexed in Scilit:
- On the Design of Wideband Transformer-Based Fourth Order Matching Networks for ${E}$ -Band Receivers in 28-nm CMOSIEEE Journal of Solid-State Circuits, 2017
- 5G: A Tutorial Overview of Standards, Trials, Challenges, Deployment, and PracticeIEEE Journal on Selected Areas in Communications, 2017
- 2.7 A wideband 28GHz power amplifier supporting 8×100MHz carrier aggregation for 5G in 40nm CMOS2017
- Compact Diode Connected MOSFET Detector for On-Chip Millimeter-Wave Voltage MeasurementsIEEE Microwave and Wireless Components Letters, 2016
- A 40-nm CMOS E-Band 4-Way Power Amplifier With Neutralized Bootstrapped Cascode Amplifier and Optimum Passive CircuitsIEEE Transactions on Microwave Theory and Techniques, 2015
- Transformer-Based Doherty Power Amplifiers for mm-Wave Applications in 40-nm CMOSIEEE Transactions on Microwave Theory and Techniques, 2015
- A 60 GHz Drain-Source Neutralized Wideband Linear Power Amplifier in 28 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- Effect of Load Modulation on Phase Distortion in Doherty Power AmplifiersIEEE Microwave and Wireless Components Letters, 2014
- Distributed active transformer-a new power-combining and impedance-transformation techniqueIEEE Transactions on Microwave Theory and Techniques, 2002
- Quantitative Comparison of Solid-State Microwave DetectorsIEEE Transactions on Microwave Theory and Techniques, 1966