The Concrete-Filled GFRP Tube (CFGT) system offers a high-performance, corrosion-resistant alternative to conventional reinforced concrete, yet the synergistic mechanics between external passive confinement and internal reinforcement morphology remain under-characterized. This study experimentally investigates the monotonic axial compression behavior of 16 full-scale CFGT short columns to systematically decouple the effects of external tube geometry, 3, 5, and 7 mm wall thickness and internal reinforcement configurations, discrete ties vs. continuous spirals; steel with GFRP; varying diameters. Experimental results reveal that while the external tube serves as the primary governor of ultimate capacity exhibiting a linear strength enhancement with wall thickness the efficiency of the internal reinforcement is strictly dictated by geometric compatibility rather than volumetric ratio. A critical confinement stiffness mismatch was identified: contrary to standard design assumptions, maximizing the internal steel spiral diameter to 12 mm reduced confinement efficiency. The excessive flexural rigidity of these large-diameter bars prevented intimate contact with the concrete core, causing a lag in confinement activation compared to flexible 6 mm spirals, which facilitated immediate composite engagement. Furthermore, increasing the tube thickness shifted the failure mode from catastrophic mixed-mode rupture to a ductile, energy-dissipating axial splitting mechanism. These findings challenge existing volumetric-based design paradigms, suggesting that optimal hybrid column performance requires a stiffness-balanced approach to reinforcement detailing.