Experimental Study on Erosion Modeling of Architectural Red Sandstone under the Action of the Natural Environment
Open Access
Abstract
When buildings are exposed to erosion from the natural environment, erosion behaviors such as surface damage and structural instability occur, which greatly affect the aesthetic value and service life of the buildings. The study of erosion behaviors and the establishment of a suitable erosion model are constructive references for the protection and restoration of buildings. In order to establish a suitable erosion model for architectural red sandstone, two types of red sandstone specimens were selected in this paper to carry out dry and wet cycle tests. Combining the theoretical analysis and the actual erosion situation, a unidirectional corrosion model is proposed to describe the erosion of buildings by the natural environment. In this model, it is assumed that only the outer surface of the building is in contact with external erosion factors for a long period of time, so this situation can be considered a unidirectional erosion process. The paper uses XRD, SEM, and ultrasonic methods to record changes in the properties of the red sandstone samples. Finally, the rationality of the unidirectional erosion model was verified numerically. The test results show that the red sandstone specimens subjected to erosion by the natural environment will be accompanied by the development of defects, such as cracks, fissures, and holes, as well as the generation of fresh material. The demarcation point of different erosion stages exists in both the in-service red sandstone specimens and the fresh red sandstone specimens, which is consistent with the results of the unidirectional erosion model. In this paper, a calculation model for the demarcation point of different erosion stages is established, and the model estimation shows that the demarcation point of different erosion stages of the in-service red sandstone sample is 1.1528 cm from the erosion surface, and the demarcation point of different erosion stages of the fresh red sandstone sample is 1.67 cm.Keywords
This publication has 35 references indexed in Scilit:
- Damage deterioration mechanism and damage constitutive modelling of red sandstone under cyclic thermal-cooling treatmentsArchives of Civil and Mechanical Engineering, 2022
- Hyperbolic Consolidation Creep Model of Weathered Red Sandstone Coarse-Grained Soil Under the Wet and Dry Cycles ConditionsGeotechnical and Geological Engineering, 2022
- Climate change impacts on cultural heritage: A literature reviewWires Climate Change, 2021
- Cyclic Drying–Wetting Effect on Shear Behaviors of Red Sandstone FractureRock Mechanics and Rock Engineering, 2021
- Geo-environmental characteristics of weathering deterioration of red sandstone relics: a case study in Tongtianyan Grottoes, Southern ChinaBulletin of Engineering Geology and the Environment, 2017
- Are cultural heritage and resources threatened by climate change? A systematic literature reviewClimatic Change, 2017
- Effect of acid rain erosion on steel fiber reinforced concreteJournal of Wuhan University of Technology-Mater. Sci. Ed., 2017
- Erosion of limestone building surfaces caused by wind-driven rain: 1. Field measurementsAtmospheric Environment, 2004
- Erosion of limestone building surfaces caused by wind-driven rain: 2. Numerical modelingAtmospheric Environment, 2004
- Deformation and fracturing behaviour of discontinuous rock mass and damage mechanics theoryInternational Journal for Numerical and Analytical Methods in Geomechanics, 1988