WZWanmao Zhang

Wanmao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wanmao Zhang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Compression Damage Precursors of Silane-Protected Concrete Under Sulfate Erosion Based on Acoustic Emission Characterization

    by Wanmao Zhang, Dunwen Liu, Yu Tang, Yinghua Jian

    Concrete materials exposed to sulfate-rich geological environments are prone to structural durability degradation due to chemical erosion. Silane-based protective materials can enhance the durability of concrete structures under harsh environmental conditions. This study investigates the evolution of acoustic emission (AE) precursor characteristics in silane-protected, sulfate-eroded concrete specimens during uniaxial compression failure. Unlike existing research focused primarily on protective material properties, this work establishes a novel framework linking “silane treatment–AE parameters–failure precursor identification”, thereby bridging the research gap in damage evolution analysis of sulfate-eroded concrete under silane protection. Uniaxial compressive strength tests and AE monitoring were conducted on both silane-protected and unprotected sulfate-eroded concrete specimens. A diagnostic system integrating dynamic analysis of the acoustic emission b-value, mutation detection of energy concentration index ρ, and multifractal detrended fluctuation analysis (MF-DFA) was developed. The results demonstrate that silane-protected specimens exhibited a distinct b-value escalation followed by an abrupt decline prior to peak load, whereas unprotected specimens showed disordered fluctuations. The mutation point of energy concentration ρ for silane-protected specimens occurred at 0.83 σc, representing a 9.2% threshold elevation compared to 0.76 σc for unprotected specimens, confirming delayed damage accumulation in protected specimens. MF-DFA revealed narrowing spectrum width (∆α) in unprotected specimens, indicating reduced heterogeneity in AE signals, while protected specimens maintained significant multifractal divergence. ∆fα peak localization revealed that weak AE signals dominated during early loading stages in both groups, with crack evolution primarily involving sliding and friction. During the mid-late elastic phase, crack propagation became the predominant failure mode. Experimental evidence confirms the engineering significance of silane protection in extending service life of concrete structures in sulfate environments. The proposed multi-parameter AE diagnostic methodology provides quantitative criteria for the safety monitoring of protected concrete structures in sulfate-rich conditions.


  • Open Access

    Multifractal Characteristics and Displacement Prediction of Deformation on Tunnel Portal Slope of Shallow Buried Tunnel Adjacent to Important Structures

    by Xiannian Zhou, Yurui He, Wanmao Zhang, Dunwen Liu

    The tunnel portal section is often in extremely weak and fragmented strata, and the deformation of the portal side and slope will affect the stability of the surrounding rock and the tunnel-supporting structure. However, the deformation characteristics and displacement development patterns of slopes in the tunnel portal section are not clear. In this paper, the multifractal characteristics and displacement prediction of the deformation sequence of the tunnel portal slope at of a weak and water-rich shallow buried tunnel adjacent to an important structure are studied in depth. Combined with the deformation characteristics of the tunnel portal slope, a suitable slope monitoring and measurement scheme is designed to analyze the deformation pattern of the tunnel portal slope. Based on the multifractal detrended fluctuation analysis (MF-DFA) method, the multifractal characteristics of the deformation monitoring sequences at each monitoring point of the tunnel portal slope are analyzed. The multifractal characteristics of displacement sequences at different monitoring points of the tunnel portal slope are consistent with the actual monitoring results. Furthermore, the Long Short-Term Memory (LSTM) model is optimized using the Particle Swarm Optimization (PSO) algorithm to predict the deformation of the tunnel portal slope. The results show that the maximum mean square error (MSE) of the horizontal displacement test set prediction results is 0.142, and the coefficient of determination (R2) is higher than 91%. The maximum value of MSE for vertical displacement test set prediction is 0.069, and the R2 are higher than 91%. The study shows that the performance of the PSO-LSTM prediction model can meet the requirements for predicting the displacement of the tunnel portal slope. Based on the MF-DFA method and PSO-LSTM prediction model, the fluctuation characteristics of the displacement value of the tunnel portal section can be accurately identified and the displacement development pattern can be effectively predicted. The conclusions of the study are of great practical significance for the safe construction of the tunnel portal section.


  • Open Access

    Experimental Study on Erosion Modeling of Architectural Red Sandstone under the Action of the Natural Environment

    by Shuisheng Zeng, Jun Zhang, Huanlin Zhang, Rutian Li, Tao Ao, Kunpeng Cao

    When buildings are exposed to erosion from the natural environment, erosion behaviors such as surface damage and structural instability occur, which greatly affect the aesthetic value and service life of the buildings. The study of erosion behaviors and the establishment of a suitable erosion model are constructive references for the protection and restoration of buildings. In order to establish a suitable erosion model for architectural red sandstone, two types of red sandstone specimens were selected in this paper to carry out dry and wet cycle tests. Combining the theoretical analysis and the actual erosion situation, a unidirectional corrosion model is proposed to describe the erosion of buildings by the natural environment. In this model, it is assumed that only the outer surface of the building is in contact with external erosion factors for a long period of time, so this situation can be considered a unidirectional erosion process. The paper uses XRD, SEM, and ultrasonic methods to record changes in the properties of the red sandstone samples. Finally, the rationality of the unidirectional erosion model was verified numerically. The test results show that the red sandstone specimens subjected to erosion by the natural environment will be accompanied by the development of defects, such as cracks, fissures, and holes, as well as the generation of fresh material. The demarcation point of different erosion stages exists in both the in-service red sandstone specimens and the fresh red sandstone specimens, which is consistent with the results of the unidirectional erosion model. In this paper, a calculation model for the demarcation point of different erosion stages is established, and the model estimation shows that the demarcation point of different erosion stages of the in-service red sandstone sample is 1.1528 cm from the erosion surface, and the demarcation point of different erosion stages of the fresh red sandstone sample is 1.67 cm.


  • Open Access

    Multifractal Characteristics of Smooth Blasting Overbreak in Extra-Long Hard Rock Tunnel

    by Wanmao Zhang, Dunwen Liu, Yu Tang, Weichao Qiu, Ruiping Zhang

    With the development of infrastructure construction in mountainous areas, the number of new extra-long tunnels is increasing. However, these tunnels often face the challenge of complex and variable surrounding rock grades, resulting in a large number of overbreak and underbreak due to the untimely adjustment of smooth blasting parameters. This study focuses on the optimization of the peripheral hole charging structure and blasting parameters for extra-long hard rock tunnels, aiming to improve the effectiveness of smooth blasting technology. The results of this study demonstrate a significant improvement in the effect of smooth blasting after implementing bidirectional polymerization blasting in the tunnel. A comparison between the bidirectional shaped charge and spaced decoupled charge blasting reveals that the former yields better results. To obtain accurate data on the tunnel section profile during excavation, a laser cross-section meter is used for measurement. Furthermore, this study quantitatively compares the optimization effect of smooth blasting parameters. The multifractal characteristics of the tunnel profile overbreak point sequences are analyzed under different smooth blasting schemes using the multifractal detrended fluctuation analysis (MF-DFA) method. It is found that both the spaced decoupled charge and the bidirectional shaped charge blasting exhibit multifractal features in the overbreak measurement point sequences. The calculation results of the multifractal features of the tunnel profile under different smooth blasting plans are in line with the actual situation.


  • Numerical analysis of the effect of bridge pile construction on the disturbance of adjacent oil pipelines

    by Jian Wu, Qi Shi, Jingxian Zhang, Wanmao Zhang

    In the process of transportation infrastructure investment and construction, there are more and more projects constructed adjacent to existing structures such as railroads and pipelines. To ensure the safety and stability of the existing structures, it is necessary to carry out the influence of bridge pile foundation construction on the surrounding strata and buildings. In this paper, a bridge pile foundation excavation project under construction is combined with a finite element analysis method to study the disturbance influence law of pile foundation construction on the neighboring oil pipeline under different working conditions. The numerical simulation results show that the adopted engineering measures can effectively protect the neighboring oil pipeline and can provide technical references for similar neighboring engineering problems.

  • Open Access

    Comprehensive Testing of Sulfate Erosion Damage of Concrete Structures and Analysis of Silane Coating Protection Effect

    by Dunwen Liu, Yinghua Jian, Yu Tang, Kunpeng Cao, Wanmao Zhang, Haofei Chen, Chun Gong

    In order to study the protection performance of silane coating on in-service concrete structures in a sulfate environment, we collect concrete samples in the field to simulate the concrete erosion process by accelerated erosion with wetting–drying cycles. We place the samples into protected, exposed and control groups corresponding to a corrosive environment with silane protection, corrosive environment without protection and general environment for three different service conditions. A combination of ultrasonic velocimetry, CT (Computed Tomography) scan imaging, NMR (Nuclear Magnetic Resonance) pore structure analysis, strength testing and other methods are used to analyze the strength, ultrasonic wave velocity, pore structure and other characteristics of the specimens during sulfate erosion. Based on the test results, the protective effect of silane coating on concrete structures under sulfate attack is quantitatively analyzed, and an index for judging the damage rate of specimens is proposed to quantitatively analyze the protective effect of silane coating. The research results show that the damage of the concrete structure under silane protection in a sulfate-attack environment can be reduced by more than 50%; its integrity damage index and strength damage index are easily affected by the location of local defects, which leads to a decrease in the protection efficiency of the surface silane coating.


  • Open Access

    Experimental Study on the Properties of Mortar and Concrete Made with Tunnel Slag Machine-Made Sand

    by Yu Tang, Weichao Qiu, Dunwen Liu, Wanmao Zhang, Ruiping Zhang

    Machine-made sand is gradually replacing natural sand to achieve sustainable development. Experimental studies and gray-correlation analysis were used to study the properties of tunnel slag machine-made mortar and concrete. The properties of machine-made mortar with different stone powder content were analyzed through experiments. By analyzing the performance of machine-made sand concrete with equal amounts of cement replaced by stone powder, the optimum replacement ratio is obtained. Gray-correlation analysis was used to compare the degree of influence of fineness modulus and stone powder content on the performance of concrete. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were used to analyze the microstructure of tunnel slag sand concrete. The test results showed that the flexural and compressive strengths of the machine-made sand concrete were greater than the standard sand with the same stone powder content. The 28-day flexural and compressive strengths had a maximum difference of more than 30%. The best stone powder content of the machine-made mortar is in the range of 5% to 8%. When the replacement cement content of stone powder is about 6%, the mechanical and working properties of machine-made sand concrete achieve the optimal state. The lower the stone powder content, the closer the mechanical and working properties of machine-made sand concrete and river sand concrete. The correlation between the performance of machine-made sand concrete and fineness modulus is the largest. When the stone powder content is low, it has almost no effect on the compressive strength of concrete. The results point out the direction for the quality control of tunnel slag machine-made sand concrete.


  • Open Access

    Orthogonal Experimental Study on Concrete Properties of Machine-Made Tuff Sand

    by Dunwen Liu, Wanmao Zhang, Yu Tang, Yinghua Jian, Yongchao Lai

    Machine-made sand instead of natural sand has become an inevitable choice for the sustainable development of the concrete industry. Orthogonal experiment and grey correlation analysis were used to investigate the performance of machine-made tuff sand concrete. The optimal concrete mix ratio of machine-made sand was obtained by orthogonal test and its working performance was verified. Grey correlation analysis was applied to compare the factors affecting the mechanical properties of the machine-made sand concrete. The test results show that the sand rate has the greatest degree of influence on slump and slump expansion. The mineral admixture has the greatest effect on the 7-day compressive strength of the concrete. Additionally, the water–cement ratio has the greatest influence on the 28-day compressive strength. The mechanical and working properties of the machine-made sand concrete reach the optimum condition when the mineral admixture is 20%, the sand rate is 46%, the stone powder content is 10% and the water–cement ratio is 0.30. Comparing different fine aggregate concretes of similar quality, we conclude that the mechanical and working properties of tuff sand concrete and limestone sand concrete and river sand concrete are similar. The compressive strengths of the mechanism concrete show the greatest correlation with roughness and the least correlation with stone powder content. The stone powder content has almost no effect on the compressive strength of concrete when the stone powder content does not exceed a certain range. The results of the study point out the direction for the quality control of concrete with machine-made sand.


  • Open Access

    Slope Micrometeorological Analysis and Prediction Based on an ARIMA Model and Data-Fitting System

    by Dunwen Liu, Haofei Chen, Yu Tang, Chao Liu, Min Cao, Chun Gong, Shulin Jiang

    The rapid development of highway engineering has made slope stability an important issue in infrastructure construction. To meet the needs of green vegetation growth, ecological recovery, landscape beautification and the economy, long-term monitoring research on high-slope micrometeorology has important practical significance. Because of that, we designed and created a new slope micrometeorological monitoring and predicting system (SMMPS). We innovatively upgraded the cloud platform system, by adding an ARIMA prediction system and data-fitting system. From regularly sensor-monitored slope micrometeorological factors (soil temperature and humidity, slope temperature and humidity, and slope rainfall), a data-fitting system was used to fit atmospheric data with slope micrometeorological data, the trend of which ARIMA predicted. The slope was protected in time to prevent severe weather damage to the slope vegetation on a large scale. The SMMPS, which upgrades its cloud platform, significantly reduces the cost of long-term monitoring, protects slope stability, and improves the safety of rail and road projects.


  • Open Access

    Evaluation of the Uniformity of Protective Coatings on Concrete Structure Surfaces Based on Cluster Analysis

    by Dunwen Liu, Wanmao Zhang, Yu Tang, Yinghua Jian, Chun Gong, Fengkai Qiu

    With the continuous development of urbanization and industrialization in the world, concrete is widely used in various engineering constructions as an engineering material. However, the consequent problem of durability of concrete structures is also becoming increasingly prominent. As an important additional measure, a protective coating can effectively improve the durability of concrete performance. Moreover, the uniformity of the concrete surface coating will directly affect its protective effect. Therefore, we propose a nondestructive inspection and evaluation method of coating uniformity based on infrared imaging and cluster analysis for concrete surface coating uniformity detection and evaluation. Based on the obtained infrared images, a series of processing and analysis of the images were carried out using MATLAB software to obtain the characteristics of the infrared images of the concrete surface. Finally, by extracting the temperature distribution data of the pixel points on the concrete surface, an evaluation method of concrete surface coating uniformity based on a combination of cluster analysis and hierarchical analysis was established. The evaluation results show that the determination results obtained by this method are consistent with the actual situation. This study has a positive contribution to the testing of concrete surface coating uniformity and its evaluation.