Synthesis and Structure of Four-Component TiZrVNb and Five-Component TiZrHfVNb Refractory High-Entropy Alloys

Authors:

Abstract
High-entropy alloys attract the attention of researchers due to a set of new properties. We consider the factors affecting the structure of high-entropy alloys (HEAs) based on elements Ti, Zr, Hf, V, and Nb. The structures of four-component Ti25Zr25V25Nb25 and five-component Ti20Zr20Hf20V20Nb20 alloys fabricated under the same melting and cooling conditions in an arc furnace are studied. Energy dispersive chemical analysis demonstrates that the chemical compositions of the alloys correspond to the nominal ones. Based on an analysis of micrographs of the ingot surfaces, we conclude that the melting conditions lead to overheating of the four-component alloy and do not cause overheating of the five-component. The primary formation of the four-component alloy is found to occur faster than that of the five-component one; however, further remelting under overheating conditions brings about the formation of a multiphase structure. The maximum content of the bcc solid solution (98%) in the Ti25Zr25V25Nb25 alloy is achieved during the first remelting, and another phase (2%) was an fcc solid solution. The maximum content of the bcc solid solution (95%) in the Ti20Zr20Hf20V20Nb20 alloy is achieved during repeated remelting, and bcc and hcp solid solutions and a Laves phase are present in an amount of 3%. The unit cell parameters of the main bcc phases in the Ti25Zr25V25Nb25 and Ti20Zr20Hf20V20Nb20 alloys are 3.270 and 3.362 Å, respectively. The choice of temperature–time conditions of melting and solidification for each specific alloy composition is shown to be important along with the fulfillment of thermodynamic conditions for the production of refractory single-phase HEAs.

This publication has 21 references indexed in Scilit: