Energy Harvesting on AC Power Lines for a Battery-Free LoRa Sensor Node
- 21 November 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (2) , 2839-2847
Abstract
This paper presents a piezoelectric energy harvesting (PEH) system designed to power a LoRa-based Wireless Sensor Node (WSN). The system integrates a trapezoidal bimorph piezoelectric beam (LiNbO3) with a magnetic tip tuned to 50 Hz, optimized for ambient vibrations typically induced around alternating current (AC) power lines. When positioned near AC power lines, the PEH converts oscillating magnetic fields into mechanical vibrations of the beam, which are then transformed into usable electrical power. The lead-free PEH is optimized and characterized in terms of impedance and loading, maximum tensile stress, coupling, and temperature stability. An experimental analysis is then performed to optimize the relative positioning of the PEH for a single-phase AC cable. A normal power density is found to 180 μW · cm−2 · g−2 which provide about 76 μW in near field of single-phase AC cable under 50 Hz, 220 V and 10.4 A. Subsequently, the PEH is used to power an electronic board capable of transmitting data payloads via LoRa communication technology. This approach opens new possibilities for powering various sensors, enabling real-time environmental data collection and wireless transmission on infrastructures without sectioning multi-wire electrical cables.Keywords
Funding Information
- ANR ETHICS (ANR-23-CE51-0027)
- European Union?s Horizon Europe (101086359)
- European Union?s Horizon Europe (871163)
This publication has 27 references indexed in Scilit:
- Experimental Validation of One-Dimensional Model of an Ideal Bimorph Actuator Provided on Bidomain Lithium NiobateMeasurement, 2024
- 2D+1 degree of freedom equivalent circuit model for LiNbO3/metal/LiNbO3 bimorph bending cantileverSensors and Actuators A: Physical, 2023
- A rotational piezoelectric energy harvester based on trapezoid beam: Simulation and experimentRenewable Energy, 2022
- Internet of Things Applications: Opportunities and ThreatsWireless Personal Communications, 2021
- Strongly coupled piezoelectric energy harvesters: Optimised design with over 100 mW power, high durability and robustness for self-powered condition monitoringEnergy Conversion and Management, 2021
- Strongly coupled piezoelectric cantilevers for broadband vibration energy harvestingApplied Energy, 2020
- Novel piezoelectric-based ocean wave energy harvesting from offshore buoysApplied Ocean Research, 2018
- Design optimization of PVDF-based piezoelectric energy harvestersHeliyon, 2017
- A MEMS Silicon-based Piezoelectric AC Current SensorProcedia Engineering, 2014
- Energy harvesting from electric power lines employing the Halbach arraysReview of Scientific Instruments, 2013