The Effects of Contamination on the Mechanical Properties of Carbon Fibre Reinforced Epoxy Composite Materials
Authors:
- 1 July 1999
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 33 (14) , 1363-1374
Abstract
The influences of contamination on the mechanical properties of a cured structural carbon fibre reinforced epoxy composite have been investigated. A wide range of contaminants have been used (water, seawater, acid, alkali and organic solvent) and samples were contaminated in both the pre- and post-cure condition. The interlaminar shear strength (ILSS), interlaminar fracture toughness (GIC) and ultimate tensile strength (UTS) of the laminates have been determined using the short beam shear, double cantilever beam and tensile tests. In both conditions, the effects of contaminants were to degrade the epoxy matrix. Although concentrations and volumes in this study were higher than normally seen in a laminating environment, it is clearly important to control environmental factors during both manufacturing processing and usage of laminate composites.Keywords
This publication has 12 references indexed in Scilit:
- Mechanical property relationships in glass-filled polyoxymethyleneJournal of Materials Science, 1996
- Prestandardization study on mode II interlaminar fracture toughness test for cfrp in japanComposites, 1995
- Prestandardization study on mode I interlaminar fracture toughness test for CFRP in JapanComposites, 1995
- Interlaminar and intralaminar fracture modes in 0/90 cross-ply glass/epoxy laminateComposites, 1995
- Rate Effects on Delamination Fracture Toughness of a Toughened Graphite/Epoxy1987
- Moisture effects during cure of high-performance epoxy matricesJournal of Applied Polymer Science, 1985
- The characterization of Mode I delamination failure in non-woven, multidirectional laminatesComposites, 1984
- Factors affecting the stress corrosion of GRP in acid environmentsComposites, 1983
- Effect of aging and moisture on the reactivity of a graphite epoxy prepregPolymer Engineering & Science, 1981
- Diffusion of Water Vapor in Graphite/Epoxy Composites1978