A self-humidifying proton exchange membrane embedded with phosphonic acid-functionalized mesoporous silica nanoparticles that has excellent dispersion and water retention
- 11 November 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (1) , 230-245
Abstract
Nanomaterials with a uniform size, large surface area, high adsorption capacity, and excellent dispersion are critical to proton conduction and cell performance when functionalized and incorporated into a proton exchange membrane. We designed and fabricated a novel composite PEM based on vinylphosphonic acid-functionalized mesoporous silica nanoparticles (VPA-MSNs), with the aim of improving the cell performance and proton conductivity of a perfluorosulfonic acid (PFSA) membrane under low relative humidity (RH) conditions. The experimental results show that the VPA-MSN(–NH2)/PFSA composite membrane provides a proton conductivity of up to 23.2 mS cm−1 at 30% RH and up to 9.6 mS cm−1 at 10% RH, which are respectively 3.2 and 8.6 times higher than those of a pristine PFSA membrane, and 5.6 and 10.4 times higher than those of a commercial Nafion membrane. In addition, the VPA-MSN(–NH2)/PFSA composite membrane exhibits superior fuel cell performance and low ohmic resistance at low relative humidity. Improvements in water absorption/retention, proton conductivity, and single-cell performance resulted from these effectively hydrophilic surfaces and mass transfer pathways, as the mesoporous structure and abundant functional groups in the membrane enhanced the connectivity of the hydrophilic zone, forming new proton transport channels. The incorporation of VPA-MSNs into the PFSA matrix also enhanced the water retention properties and mechanical strength, and adjusted the organic–inorganic interface and hydrophilic ionic domains inside the membranes simultaneously. The results indicate that this new type of VPA-MSN(–NH2)/PFSA composite membrane is promising for developing PEMs that tolerate variations in humidity.Keywords
Funding Information
- Guangdong Provincial Introduction of Innovative Research and Development Team (2016ZT06N500)
- Development and Reform Commission of Shenzhen Municipality (2017, No. 1106)
- National Basic Research Program of China (2018YFB1502503)
- Shenzhen Peacock Plan (KQTD2016022620054656)
This publication has 32 references indexed in Scilit:
- Toward Anhydrous Proton Conductivity Based on Imidazole Functionalized Mesoporous Silica/Nafion Composite MembranesElectrochimica Acta, 2015
- Enhanced proton conductivity of the hybrid membranes by regulating the proton conducting groups anchored on the mesoporous silicaJournal of Power Sources, 2014
- Polybenzimidazole Block Copolymers for Fuel Cell: Synthesis and Studies of Block Length Effects on Nanophase Separation, Mechanical Properties, and Proton Conductivity of PEMACS Applied Materials & Interfaces, 2014
- Nafion®/ODF-silica composite membranes for medium temperature proton exchange membrane fuel cellsJournal of Power Sources, 2014
- Anhydrous Phosphoric Acid Functionalized Sintered Mesoporous Silica Nanocomposite Proton Exchange Membranes for Fuel CellsACS Applied Materials & Interfaces, 2013
- New hybrid membranes based on phosphonic acid functionalized silica particles for PEMFCJournal of Polymer Science Part A: Polymer Chemistry, 2012
- Meso-Structured Silica-Nafion Hybrid Membranes for Direct Methanol Fuel CellsJournal of the Electrochemical Society, 2012
- Phosphonic acid-grafted mesostructured silica/Nafion hybrid membranes for fuel cell applicationsJournal of Power Sources, 2011
- Surface modification of porous poly(tetrafluoraethylene) film by a simple chemical oxidation treatmentApplied Surface Science, 2010
- Fabrication and investigation of SiO2 supported sulfated zirconia/Nafion® self-humidifying membrane for proton exchange membrane fuel cell applicationsJournal of Power Sources, 2008