Optimization of process parameters of Nd:YAG laser microgrooving of Al2TiO5 ceramic material by response surface methodology and artificial neural network algorithm
Authors:
- 1 August 2007
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 221 (8) , 1341-1350
Abstract
The high-intensity pulsed Nd:YAG laser has the capability to produce both deep grooves and microgrooves on a wide range of engineering materials such as ceramics, composites, and diamond. The micromachining of ceramics is highly demanded in industry because of its wide and potential uses in various fields such as automobile, electronic, aerospace, and biomedical engineering. Engineering ceramic, i.e. aluminium titanate (Al2TiO5), has tremendous application in the automobile and aero-engine industries owing to its excellent thermal properties. The present paper deals with the artificial neural network (ANN) and response surface methodology (RSM) based mathematical modelling and also an optimization analysis of the machining characteristics of the pulsed Nd:YAG laser during the microgrooving operation on Al2TiO5. The experiments were planned and carried out based on design of experiments (DOE). Lamp current, pulse frequency, pulse width, assist air pressure, and cutting speed were considered as machining process parameters during the pulsed Nd:YAG laser microgrooving operation and these parameters were also utilized to develop the ANN predictive model. The response criteria selected for optimization were upper width, lower width, and depth of the trapezoidal microgroove. The optimal process parameter settings were obtained as an assist air pressure of 1.2944 kgf/cm2, lamp current of 19.3070A, pulse frequency of 1.755 kHz, pulse width of 5.7087 per cent of duty cycle, and cutting speed of 10mm/s for achieving the desired upper width, lower width, and depth of the laser microgroove. The output of the RSM optimal data was validated through experimentation and the ANN predictive model. A good agreement is observed between the results based on the ANN predictive model and the actual experimental observations.Keywords
This publication has 12 references indexed in Scilit:
- Modelling and analysis of pulsed Nd:YAG laser machining characteristics during micro-drilling of zirconia (ZrO2)International Journal of Machine Tools and Manufacture, 2006
- Recent applications of pulsed lasers in advanced materials processingThin Solid Films, 2004
- Supersonic flow characteristics in laser groovingOptics & Laser Technology, 2003
- Neural network modeling and analysis of the material removal process during laser machiningThe International Journal of Advanced Manufacturing Technology, 2003
- Grooving by Nd:YAG laser treatmentJournal of Materials Processing Technology, 2000
- A laser beam machining (LBM) database for the cutting of ceramic tileJournal of Materials Processing Technology, 1998
- Removal of laser-melted material with an assist gasJournal of Applied Physics, 1998
- The processing of a magnesium-alumino-silicate matrix, SiC fibre glass-ceramic matrix composite using a pulsed Nd-YAG laserJournal of Materials Science, 1996
- Development of an analytical model for the laser machining of ceramic and glass-ceramic materialsJournal of Applied Physics, 1996
- Thermal stabilization of aluminium titanate and properties of aluminium titanate solid solutionsJournal of Materials Science, 1991