Influence of Unit Water Content Control on Concrete Performance in the Ready-Mixed Concrete Production Process
Open Access
Abstract
This study examined the effects of increasing concrete unit water content and artificially controlling water content on concrete performance in the production process of ready-mixed concrete. Results showed that changes in the unit water content of 20 concrete mix proportions without air-entraining significantly reduced concrete compressive strength, increased porosity, and in-creased occurrence of bleeding. A unit water content increase of 25 kg/m3 or more may reduce the compressive strength of concrete below the design standard and significantly affect the occurrence of bleeding water. Moreover, an extra unit water content of at least 25 kg/m3 could significantly affect the diffusion of chloride ions in the concrete. The carbonation depth of concrete was extremely high with the increase in unit water content and water addition. In the production of concrete requiring at least normal strength or durability, the extra water change to total unit water content should be maintained at 15 kg/m3 or less. And a water–cement ratio of 48% or less and a unit water content of 155 kg/m3 or less are considered effective for management of concrete quality. Considering the aggregate type, absorption rate, and moisture state, the management of unit water content error in concrete production processes requires greater.Keywords
Funding Information
- National Research Foundation of Korea (NRF) (2022R1A2C100983012)
This publication has 11 references indexed in Scilit:
- Fatigue and fracture properties of concrete mixtures with various water to cement ratio and maximum size of aggregatesProcedia Structural Integrity, 2022
- Properties of recycled aggregate concrete with different water control methodsConstruction and Building Materials, 2017
- Influence of effective mixing water in recycled concreteConstruction and Building Materials, 2017
- Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performanceConstruction and Building Materials, 2016
- Determination of water content in fresh concrete mix based on relative dielectric constant measurementConstruction and Building Materials, 2012
- The influence of water on the performance of concreteConstruction and Building Materials, 2011
- Properties of fresh and hardened concreteCement and Concrete Research, 2011
- Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concreteConstruction and Building Materials, 2009
- Contribution to the Concrete Strength versus Water-Cement Ratio RelationshipJournal of Materials in Civil Engineering, 2008
- Ultrasonic Testing to Determine Water-Cement Ratio for Freshly Mixed ConcreteCement, Concrete and Aggregates, 1998