HRHwa-Sung Ryu

Hwa-Sung Ryu

*This is an algorithmically generated author record based on publicly available information.

Hwa-Sung Ryu has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Unit Water Content Control on Concrete Performance in the Ready-Mixed Concrete Production Process

    by Sang-Hoon Park, Hwa-Sung Ryu, Won-Jun Park

    This study examined the effects of increasing concrete unit water content and artificially controlling water content on concrete performance in the production process of ready-mixed concrete. Results showed that changes in the unit water content of 20 concrete mix proportions without air-entraining significantly reduced concrete compressive strength, increased porosity, and in-creased occurrence of bleeding. A unit water content increase of 25 kg/m3 or more may reduce the compressive strength of concrete below the design standard and significantly affect the occurrence of bleeding water. Moreover, an extra unit water content of at least 25 kg/m3 could significantly affect the diffusion of chloride ions in the concrete. The carbonation depth of concrete was extremely high with the increase in unit water content and water addition. In the production of concrete requiring at least normal strength or durability, the extra water change to total unit water content should be maintained at 15 kg/m3 or less. And a water–cement ratio of 48% or less and a unit water content of 155 kg/m3 or less are considered effective for management of concrete quality. Considering the aggregate type, absorption rate, and moisture state, the management of unit water content error in concrete production processes requires greater.


  • Open Access

    Properties of External Insulation Surface Preparation Mortar Using Expandable Graphite for Fire Resistance

    by Sung-Young Song, Hwa-Sung Ryu, Sang-Heon Shin, Deuck-Mo Kim, Won-Jun Park

    In the case of fire, surface treatment agents used in external insulation finishing methods are substances that are vulnerable to fire. This study examined the incorporation and applicability of expandable graphite in surface preparation mortar so that heat transfer to the surface part can be suppressed even when the cementitious surface preparation mortar is thinly constructed in the external insulation method. Experimental results showed that the mechanical properties of surface preparation mortar were improved by using the fly ash and silica fume. Surface treatment materials using expanded graphite have a characteristic of expanding when a fire occurs. It was experimentally confirmed that incorporating expanded graphite can reduce the phenomenon of heat penetration to the rear surface when the surface preparation mortar is exposed to high temperatures such as a flame.

  • Open Access

    Evaluation of Corrosion Resistance of Corrosion Inhibitors for Concrete Structures by Electrochemical Testing in Saturated Ca(OH)2Solutions with NaCl and Na2SO4

    by Hwa Sung Ryu, Chang Gil Lim, Tae Won Kang, Seungmin Lim, Hong Tae Kim, Sang Heon Shin

    Reinforcing steel maintains passivity in an alkaline concrete environment. However, the passive film on the steel can be destroyed as the concrete becomes acidic, which could induce the corrosion of reinforcing steel. Carbonates and sulfates destroy the concrete matrix and accelerate the penetration of hazardous ions, thereby deteriorating the structure. To alleviate the corrosion of internal reinforcing steel within concrete, corrosion inhibitors are most widely used. In this study, the effects of inorganic nitrite (lithium nitrite) and amino acid corrosion inhibitors (diethanolamine, methyl diethanolamine, and 4-aminobutyric) on corrosion resistance and the pH of the solution with various concentrations of Na2SO4(0.89, 1.77 g/L) in saturated Ca(OH)2that contained NaCl (0.98 g/L), which simulated the concrete environment, were investigated. The corrosion resistance of inhibitors was evaluated by corrosion potential, electrochemical impedance spectroscopy, and potentiodynamic techniques. The results indicated improvement of corrosion resistance by the addition of amino acid corrosion inhibitors. It was confirmed that the inhibitor adsorbed on the surface of the specimen and passivated to reduce the corrosion reaction. In addition, the 4-aminobutyric acid corrosion inhibitors had the corrosion protection efficiency of 67.87–77.80%, which is a higher value than that of the inorganic nitrite corrosion inhibitor (lithium nitrite: 69.36–75.93%) and other amino acid corrosion inhibitors (diethanolamine: 35.69–39.91%; methyl diethanolamine: 66.07–69.09%).


  • Open Access

    Properties of Cement Mortar Using Limestone Sludge Powder Modified with Recycled Acetic Acid

    by Hwa-Sung Ryu, Deuck-Mo Kim, Sang-Heon Shin, Wan-Ki Kim, Seung-Min Lim, Won-Jun Park

    One of the various methods of manufacturing low-carbon cement is substituting limestone powder as a raw material or admixture. Limestone sludge powder (LSSP) has the same composition as that of limestone powder. The surface characteristics of LSSP powder modified with recycled acetic acid (RAA) and the characteristics of cement using this modified LSSP as a substitute were investigated in this study. The surface of LSSP modified with RAA was converted into calcium acetate and had a large grain size. When conventional LSSP was used as a substitute for cement, the initial strength increased owing to improved pore filling; however, the strength after 28 days of aging was lower than that of non-substituted cement. In the case of modified LSSP being replaced with cement at up to 10% of the cement weight, however, the calcium acetate on its surface increased the amount of hydration products in the cement, thereby increasing both the initial and the long-term strength.


  • Open Access

    Time and Crack Effect on Chloride Diffusion for Concrete with Fly Ash

    by Sang-Hwa Jung, Hwa-Sung Ryu, Subbiah Karthick, Seung-Jun Kwon


  • Open Access

    Properties of Ready Mixed Acrylic Paste for Exterior Insulation Using Pozzolanic Materials and Atomizing Slag

    by Sung-Yong Song, Hwa-Sung Ryu, Sang-Heon Shin, Deuck-Mo Kim, Won-Jun Park

    Ready mixed acrylic paste (RMAP) is a material used in exterior insulation systems of buildings; it consists of liquids and aggregates. However, it is considerably difficult to use an admixture to control the physical properties of the RMAP owing to problems associated with strength and workability. Thus, to improve the properties of RMAP, this study evaluates the properties of a mortar produced with RMAP as well as pozzolanic materials and atomizing slag, which is a by‐product from the steelmaking industry. It was observed that if the density difference is large, a liquid RMAP may experience segregation. Through our experiments, we confirm that segregation resistance could be achieved even at 20% atomizing slag, which has a high density, by increasing the viscosity by approximately 1000 cP through the use of 10% fly ash and 3% metakaolin in the RMAP. Despite the increase in viscosity with the addition of the atomizing slag, the flow of the RMAP increased from 160 to 175 mm due to the spherical particle shape of the slag; in addition, the strength and water absorption coefficient also improved. In particular, the adhesion tension increased from 1.8 N/mm2 to 2.4 N/mm2 or higher.

  • Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber

    by Hwa-Sung Ryu, Deuck-Mo Kim, Sang-Heon Shin, Il-Hwan Ryu, Ji-Min Joe

    Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber macro forta fber;fiber reinforced concrete;steel fiber;organic fiber;equivalent flexural strength; Concrete is a semi-brittle material, so its compressive strength is high but its tensile strength is low. The use of fiber-reinforced concrete to improve the disadvantages of such concrete can be an effective way to toughen effective toughness, and the performance is improved by using steel fiber reinforced concrete for structures that are vulnerable to bending forces. However, alternative materials are required due to corrosion of steel fiber and lowering of workability. The purpose of this study is to evaluate the availability of replacing steel fiber reinforced concrete by evaluating physical properties, mechanical properties and drying shrinkage properties of concrete using macro forta fiber with excellent diffusibility. Experimental results show that the macro forta fiber has better fluidity and mechanical performance than the steel fiber reinforced concrete. It was also confirmed that the crack resistance of concrete using Macro Forta fiber is effective in improving structural cracking and drying shrinkage resistance compared to steel fiber reinforced concrete.


  • An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System

    by Hwa-Sung Ryu, Woo-Jin Jeong, Deuck-Mo Kim, Seong-Yong Song, Sang-Heon Shin

    An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System reinforced concrete structures;slab formwork;reducing noise;drop system; In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.